August 25th, 2010, 12:02 AM | #481 |
ninjette.org guru
Name: Ryan
Location: Sacramento, CA
Join Date: May 2009 Motorcycle(s): 2007 EX250 (street), 1994 EX250 (Race), 2008 250R (Race), 2000 250 (project), 1991 EL250 (a cruiser!) Posts: 287
|
Those look nice.
|
|
August 25th, 2010, 01:24 AM | #482 |
CVMA / AFM / M1GP #250
Name: Steve
Location: Los Angeles
Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.
|
|
|
August 25th, 2010, 09:44 AM | #483 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
$310 shipped
__________________________________________________
Sportisimoto USA is born. |
|
August 25th, 2010, 10:07 AM | #484 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Geez... How much do them things weigh?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 25th, 2010, 10:27 AM | #485 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
about as much as the stock ones
__________________________________________________
Sportisimoto USA is born. |
|
August 26th, 2010, 12:44 PM | #486 |
ninjette.org member
Name: menno
Location: Holland
Join Date: Jun 2010 Motorcycle(s): Kawasaki Ninja 250r 2008, Leo Vince Oval Slip-On, custom header, Seat Cowl, Powercommander III Posts: 27
|
hey matt,
are you selling the new style hugger and undertail yet? if so i wanna order 1 of both xD |
|
August 26th, 2010, 01:00 PM | #487 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Menno it is actually cheaper for you to order from sportisi by looking at the shipping charts.
__________________________________________________
Sportisimoto USA is born. |
|
August 26th, 2010, 01:12 PM | #488 |
ninjette.org member
Name: menno
Location: Holland
Join Date: Jun 2010 Motorcycle(s): Kawasaki Ninja 250r 2008, Leo Vince Oval Slip-On, custom header, Seat Cowl, Powercommander III Posts: 27
|
ok i will do so then,
does he also have the new style huggers and undertails yet? |
|
September 10th, 2010, 07:42 PM | #489 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
What do you guys think about this? I'm willing to do a gb on them if I can get a couple people to dive in. $485 shipped for front caliper, disc, mount. You can add the radial MC for $100.
__________________________________________________
Sportisimoto USA is born. |
|
September 10th, 2010, 08:01 PM | #490 | |
ninjette.org member
Name: Ken
Location: NY
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129
|
Quote:
How many and what diameter are the pistons, what diameter is the rotor? Any stopping distance comparisons? |
|
|
September 10th, 2010, 08:04 PM | #491 |
CVMA / AFM / M1GP #250
Name: Steve
Location: Los Angeles
Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.
|
holy crap those look nice... too bad they're not AFM 250 production allowed, 250 superbike perhaps?
|
|
September 10th, 2010, 09:10 PM | #492 |
ninjette.org guru
Name: Ryan
Location: Sacramento, CA
Join Date: May 2009 Motorcycle(s): 2007 EX250 (street), 1994 EX250 (Race), 2008 250R (Race), 2000 250 (project), 1991 EL250 (a cruiser!) Posts: 287
|
|
|
September 12th, 2010, 05:39 PM | #493 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
these calipers work with the standard rotor? its for the same diameter? somehow looks like its a bigger diameter rotor in that pic. cos i would keep the standard rotor till i wear them down and then replace them later down the road~ i wonder how much more the brake pads cost compared to the standard HH pads though... lol
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
September 12th, 2010, 06:14 PM | #494 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Wayan all info I need to get. Standard rotors are a no. These are not sportisi affiliated. Wayan I can get a set sent to santoz for you.
__________________________________________________
Sportisimoto USA is born. |
|
September 12th, 2010, 09:26 PM | #495 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
ah, thanks Matt, but i was hoping that if they were from here in indonesia (or one of our close asian neighbors and being sold through sportisi) that i might be able to get them for a little less than your USA price.
But it would cost even more to have it sent over here from the states. i also take my time mulling over what mods to do next so having that as an easily accessible mod over here i would put it on my "to buy / wish list" hehe my to do list still consists of: *engine porting and re-tuning by Sportisi *CR carb... cant decide if its something i wanna do or not, lol *these brakes (although I'm quite happy with the stock brakes as they are, but the after market ones look sweet) *front flush mount blinkers (if we ever get nice ones here) *rearsets *clipons (haven't seen one that i really want yet. i want to keep the handle bar weights, and all the clipons dont seem to have them here) *Scott's CF rear Tire hugger for 150 size wheels, *battlax 110 front wheel when my stock ones wear out. uh... im sure there are more, but im slowly getting to the more "optional" and a little more expensive mods now, so it takes me longer to save up and decide to blow the money on them its gonna be a never ending story im sure~
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
September 12th, 2010, 09:38 PM | #496 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
The xrace clipons use bar weights. I would send these over at cost plus shipping from the manufacturer for you Wayan you only would have to pay sportisi for install.
__________________________________________________
Sportisimoto USA is born. |
|
September 14th, 2010, 05:52 PM | #497 | |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
Quote:
just asking, since i think the X Race clipons and rearsets are available here as well. ive seen the rearsets at at a shop, and that image is from some indonesian forum. thanks for the info regarding the clipons!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
|
November 2nd, 2010, 08:31 PM | #498 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Now selling Shikra Leathers. Custom fitted from Pakistan. $600 Any color combination you want. More styles to come. Dual zipper design. kevlar reinforced. 1.3mm cowhide leather. Note the bird emblem can be removed if desired.
__________________________________________________
Sportisimoto USA is born. |
|
November 2nd, 2010, 09:40 PM | #499 |
ninjette.org guru
Name: Ryan
Location: Sacramento, CA
Join Date: May 2009 Motorcycle(s): 2007 EX250 (street), 1994 EX250 (Race), 2008 250R (Race), 2000 250 (project), 1991 EL250 (a cruiser!) Posts: 287
|
is ALL of the leather kevlar reinforced? Or is that just the stretch panels? Does it use keprotec or some other kevlar-based material?
|
|
November 2nd, 2010, 09:42 PM | #500 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Stretch panels. You could do thefull thing in it if you wanted. I believe keprotec by will confirm.
__________________________________________________
Sportisimoto USA is born. |
|
February 8th, 2011, 11:34 AM | #501 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Any new/old product updates Matt?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
February 8th, 2011, 08:01 PM | #502 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
any idea if Santoso received your package yet?
if yes, then i can expect my piece to arrive here in bali kinda soonish i hope. thanks, W
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
February 8th, 2011, 09:50 PM | #503 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Wayan it should be there within the week. Shipping in indonesia has been screwed up the last couple of days since they found a bomb I guess.
Jason there are a few thing I have hiding.
__________________________________________________
Sportisimoto USA is born. |
|
February 9th, 2011, 12:00 AM | #504 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i would have thought that they send bombs out, and not into Indonesia! but i guess the consumers are here, and the the producers are there when it comes to artillery/firearms
im not a happy chap when it comes down to bombs, almost lost my mom and brother in the last Bali bombings... both still have hearing problems in their one ear back on topic; looking forward to receiving it, thanks!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
February 9th, 2011, 02:35 PM | #505 | |
ninjette.org guru
Name: Mikel
Location: Valley of the Sun
Join Date: Mar 2009 Motorcycle(s): '09 Blue Kawasaki KLE650 Versys, '95 Ducati 900SS/CR (undergoing track conversion) Posts: 287
|
Quote:
I am wondering if you could get just the bracket and rotor? I already have a set of Radial Calipers just sitting on the bench for another project.
__________________________________________________
2009 KLE650 LSL bars, Full Muzzy PC-V 1995 900SS/CR mildly modified |
|
|
February 10th, 2011, 11:57 AM | #506 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I probably could but it is not worth it to me.
Jason the newest update is that I am an authorized vesrah brake pad dealer. 250 pads and more.
__________________________________________________
Sportisimoto USA is born. |
|
February 10th, 2011, 12:06 PM | #507 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
That's awesome. I'm still loving the HEL brake lines you sourced for me. When I'm ready for pads I'll definitely be coming to you!!!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
February 23rd, 2011, 05:41 PM | #508 |
ninjette.org member
Name: Gordo
Location: Brisbane, AU
Join Date: Feb 2010 Motorcycle(s): 2008 Ninja 250R Posts: 36
|
Matt,
Did you get my PM? I would like to buy a few tasty Sportisi products. Got cash burning a whole in my pocket! |
|
February 23rd, 2011, 05:46 PM | #509 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
If your in austraila. Contact sportisi direct.
__________________________________________________
Sportisimoto USA is born. |
|
February 23rd, 2011, 09:56 PM | #510 |
ninjette.org member
Name: Darryl
Location: Brisbane, Australia
Join Date: Dec 2008 Motorcycle(s): 2010 Ninja ZX-6R Posts: 211
|
|
|
February 24th, 2011, 03:13 PM | #511 |
User Title Free Since '12
Name: Floyd
Location: Barbados
Join Date: Dec 2010 Motorcycle(s): '10 Ninja 250R Special Edition Green Posts: A lot.
Blog Entries: 13
MOTM - Feb '12
|
Matt,
Does Sportisi carry a tank grip pad? Seem to recall you do. Choices and cost?
__________________________________________________
"Improvement makes straight roads, but the crooked roads without improvement, are roads of genius." — William Blake |
|
February 24th, 2011, 03:15 PM | #512 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
|
|
February 27th, 2011, 02:06 PM | #513 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I have a vr6 exhaust that is brand new that I want gone. The muffler has one small imperfecion and a nick on the base. other wise in perfect condition. $250 shipped. Will throw in a jet kit and airfilter for another $100.
__________________________________________________
Sportisimoto USA is born. |
|
February 27th, 2011, 02:37 PM | #514 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
matt,
are you able to source this style of hugger/swing arm cover through your contacts in Indonesia? i ordered one from paul, but of course, will likely never receive it. also, can you post pics of all the different versions of sportisi huggers that are available? thanks |
|
February 27th, 2011, 04:07 PM | #515 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
That actually looks a lot more like the sportisi hugger that he already sells.
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
February 27th, 2011, 06:00 PM | #516 |
2012 is here,let's ride!!
Name: dex
Location: visalia,ca.
Join Date: Sep 2009 Motorcycle(s): 2009R,'12 suzuki +500 Posts: 354
|
kitaco clip-ons?
matt,can you offer a group buy on kitaco's?
__________________________________________________
''I regulate every shade of that!'' |
|
February 27th, 2011, 06:08 PM | #517 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
you get 5 people together for them and yes I would.
NOTE Kitaco was replaced with NUI same product different name. Kitaco quit making them.
__________________________________________________
Sportisimoto USA is born. |
|
February 27th, 2011, 06:48 PM | #518 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
matt,
what's the word on the huggers i posted above? |
|
February 27th, 2011, 06:51 PM | #519 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I know the company that makes them and the owner. But I will not be importing those. They are to close to the sportisi models.
__________________________________________________
Sportisimoto USA is born. |
|
February 27th, 2011, 07:11 PM | #520 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
just get ze ones from matt, they look so similar (almost cant see the difference without getting both items side by side), and at least you know that you will actually receive your goods! since a heap of others have already bought and installed those sportisi huggers
or just do what i do... give your bike a hug now and again, and tell yourself the bike has a hugger!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where is Matt from Sportisimoto USA? | samw | Motorcycle-related | 25 | August 18th, 2012 12:50 PM |
Sportisimoto VR Carbon FSE | NathanUc | 2008 - 2012 Ninja 250R Farkles | 12 | July 28th, 2011 08:10 AM |
My Sportisimoto Bodywork | ztrack157 | Motorcycle-related | 6 | May 18th, 2011 02:39 PM |
Sportisimoto BRT Ignitions GB | ztrack157 | Motorcycle-related | 77 | July 27th, 2010 10:36 PM |
Got a big box from Sportisimoto USA today | 2WheelGuy | 2008 - 2012 Ninja 250R Tech Talk | 25 | February 14th, 2010 08:27 AM |
|
|