May 2nd, 2011, 11:55 PM | #561 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i ordered the custom steel brackets that ill be using to hold the head light in place... also walked by the bike feeling sad yet again this morning....
ah well... soon soon ill be able to ride around again! in the mean time its the car, or my brothers KLX W.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
May 3rd, 2011, 08:05 AM | #562 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
|
|
May 3rd, 2011, 10:14 AM | #563 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
__________________________________________________
|
|
May 3rd, 2011, 11:26 AM | #564 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
^^^ nice, I need one of those, but i don't know where to get them and how to install it.
|
|
May 3rd, 2011, 11:44 AM | #565 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
It's pretty simple, you can get all the components at auto zone (I already had the wire/wire connectors though). I bought a lighter/socket then wired it up with a fuse, then to the battery just to be safe. I got some help from my dad who knows how to do all the stuff but it's pretty straight forward. I was looking for a diy but never found one so just decided to attempt it myself. I might take some picks and post up a simple diy next time I take the bike apart.
__________________________________________________
|
|
May 3rd, 2011, 03:34 PM | #566 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I bought Vortex swing arm spools from Cycle Gear and then Found out I paid more when I could of had it for cheaper at a local shop. I also found out that my Go Pro camera I bought could of been had cheaper---really cheaper at the bike shop as well. I'm about to do clean my chain on the bike.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
May 3rd, 2011, 06:49 PM | #567 | |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
Quote:
|
|
|
May 4th, 2011, 03:08 PM | #568 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
I just made a decent phone mount for my dash, it took a few hours to make but it was well worth it. I'm sorta ocd about damaging my phone so I made the mount extremely secure (lots of velcro) . I love having a bike, it gives me fun stuff to do in my free time. O, I cleaned the bike too.
__________________________________________________
|
|
May 4th, 2011, 03:55 PM | #569 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Here are a couple pictures of my new phone mount. I can even use it to record my rides, as a gps and charge it at the same time with my new lighter socket...isn't life great?
__________________________________________________
|
|
May 4th, 2011, 06:18 PM | #570 |
ninjette.org member
Name: Brown
Location: Caddo Mills, TX
Join Date: May 2011 Motorcycle(s): 1995 Ninja EX250 Posts: 65
|
Looks awesome Live2Ride. I am going to try and hook up something similar this weekend.
|
|
May 4th, 2011, 06:29 PM | #571 |
Motorcyclist
Name: James
Location: Maryland
Join Date: May 2010 Motorcycle(s): 2014 Ninja 300 ABS Posts: A lot.
|
Good job Cody, I like it!!
I'm gonna fab up some metal that spans the fairing bolts with an attached Ram Mount for my iPhone as soon as I get the cradle. |
|
May 4th, 2011, 06:31 PM | #572 | |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Quote:
p.s. thanks slolane! If my memory serves me correctly, some one else has done the ram mount mod you suggested, I just can't remember who.
__________________________________________________
|
|
|
May 4th, 2011, 06:43 PM | #573 | |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Quote:
__________________________________________________
|
|
|
May 4th, 2011, 07:18 PM | #574 | |
Motorcyclist
Name: James
Location: Maryland
Join Date: May 2010 Motorcycle(s): 2014 Ninja 300 ABS Posts: A lot.
|
Quote:
Thanks for the reminder man. |
|
|
May 4th, 2011, 07:42 PM | #575 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
So this is mine! It only cost like $6 bucks
Found the mount of Ebay (live2ride I have the EVO also) Here is the mount: http://cgi.ebay.com/Bike-Motorcycle-...item336749c4db I just took the mount apart and used only the parts I needed, just the front. Then used an L bracket to attach it right above the gauge cluster (yes i screwed it in ) I dont actually have a camera besides my phone, makes it a little hard to take a picture of the phone in the mount I'll try and find some other means of taking the pic |
|
May 4th, 2011, 07:47 PM | #576 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Nice! That looks like it works well. I was considering one of those types of mounts but I seem to enjoy making my own accessories, I have a lot of free time now that I'm out of class.
__________________________________________________
|
|
May 4th, 2011, 07:51 PM | #577 | |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Quote:
But no one seems to carry Krylon Fusion |
|
|
May 4th, 2011, 07:55 PM | #578 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
I used normal flat black duplicolor on mine, it does the job. I found that auto zone and walmart both carry the Krylon Fusion, idk if you have any of those near you.
__________________________________________________
|
|
May 4th, 2011, 08:02 PM | #579 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
|
|
May 6th, 2011, 10:48 PM | #580 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Any luck?
I just got finished painting more bolts, I think I've gotten all the normal bolts except the ones on the undertail. I painted the front fender bolts, the bolts surrounding the dash, the passenger peg bolts, license plate bolts, and idk if I mentioned the handlebar bolts before, but I did those the other day; all the bolts are gold and it's holding up great. Unfortunately I found 3 small 1-1.5cm scratches on my tank, 2 on the left and 1 on the right . I have a tank protector but they were kinda far to the side, I'm not sure how they got there .
__________________________________________________
|
|
May 8th, 2011, 04:06 PM | #581 |
DUCEATR
Name: Dan
Location: El Paso, Texas
Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628
|
I did my own version of the $36 muffler, the $0 muffler. I used my welding skillz and the stock internals to create the internals, chopped it, and went black.
Last futzed with by DarC; May 9th, 2011 at 07:32 AM. |
|
May 8th, 2011, 05:23 PM | #582 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
|
|
May 9th, 2011, 06:06 AM | #583 |
ninjette.org sage
Name: darius
Location: GA
Join Date: Apr 2009 Motorcycle(s): 2000 250 sold; 2005 636 sold. BIKELESS IN ATLANTA Posts: 753
|
|
|
May 9th, 2011, 07:32 AM | #584 |
DUCEATR
Name: Dan
Location: El Paso, Texas
Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628
|
Fixed it for ya
|
|
May 9th, 2011, 10:14 AM | #585 |
Perpetual Newb
Name: …
Location: …
Join Date: Mar 2011 Motorcycle(s): … Posts: 782
|
Just finished doing my 600-mile service and failed at my attempt to shim the carb needles. Couldn't get 2 of the screws to loosen and started to chew up the screw heads so I stopped until I can get some JIS bits to try again. Chain was slightly out of spec and too loose. Still need to take it for a ride and check the idle speed. If the rain holds out I plan on washing it and waxing it but it ain't looking good. May have to go catch a movie instead.
|
|
May 9th, 2011, 01:19 PM | #586 |
ninjette.org guru
Name: Nathaniel
Location: Jacksonville, Florida
Join Date: Jan 2011 Motorcycle(s): Past: 2007 250 Ninja 2005 XR650R 2003 KLX400R Posts: 335
|
I think I have a burnt up valve/valve seat... I'm tearing the engine down the weekend after this to see. Then I'll fix it when I have money to. But this sucks!
__________________________________________________
When life throws turns at you, aim for the apex. |
|
May 9th, 2011, 01:26 PM | #587 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Gremlins stole the phillips screw off the side fearing black part! Wtf
|
|
May 9th, 2011, 01:33 PM | #588 |
ninjette.org guru
Name: Nathaniel
Location: Jacksonville, Florida
Join Date: Jan 2011 Motorcycle(s): Past: 2007 250 Ninja 2005 XR650R 2003 KLX400R Posts: 335
|
Gremins got inside my engine and detonated it... WEIRD. Those pesky little fellars.
__________________________________________________
When life throws turns at you, aim for the apex. |
|
May 9th, 2011, 01:57 PM | #589 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
|
|
May 9th, 2011, 04:47 PM | #590 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
didnt mean to take up so much space but im a noob to forums....just wanted to say i love the ninja the color and shape its in is great wish my fixer uper was in such great shape and a 250...bouth it on ebay a few years ago (ninja 650 1993) and got ripped off on it now im working on it while working on my new 09 250 but this stuff gets expensive and the military hates paying. but yea great looking bike
|
|
May 9th, 2011, 04:51 PM | #591 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
took m bike out for a spin in my driveway since its all i can do. iv put 5 miles on her from it. making a list of mods i want to do while reading everything you guys and gals have to say gave her a bath even though she didnt need in spray painted my windshield blk. layed beside her while i dreamed of all the possibilitys till my wife got jellous. now looking for a lid and trying to get a permit to get to my class next month so i got alot of time to lube her up clean practice stop and go's and little circles at low speed and yet more day dreaming got all my gear except boots which can wait and a lid which is next.
|
|
May 9th, 2011, 07:57 PM | #592 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
This was actually yesterday, but I set up my phone to be able to take videos of my rides. Here's a short clip of a great back road I found the other day. I guess I should have let off the throttle near the end .
__________________________________________________
|
|
May 9th, 2011, 08:02 PM | #593 | |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Quote:
|
|
|
May 9th, 2011, 08:09 PM | #594 | |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
Quote:
__________________________________________________
|
|
|
May 9th, 2011, 08:41 PM | #595 |
Motorcyclist
Name: James
Location: Maryland
Join Date: May 2010 Motorcycle(s): 2014 Ninja 300 ABS Posts: A lot.
|
Mounted iPhone, first go at it. Will test and see what needs to be altered. Ram Mount still on the way so I will check that out when it gets here to see which I like best.
iPhone mount in Otterbox mount. |
|
May 10th, 2011, 08:18 AM | #596 |
ninjette.org member
Name: John
Location: Grand Rapids, Mi
Join Date: Apr 2011 Motorcycle(s): 2010 Ninja 250r Blue Posts: 63
|
Yesterday, I finally got to ride my ninja for the first time and it was amazing. I love this bike!
|
|
May 10th, 2011, 06:56 PM | #597 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
I just fell in love with my bike again. I got off work and went for a short joy ride around town before heading home but something about that ride just clicked. I've had my bike for just over a month now and to fall in love with it again so quickly is just plain awesome.
__________________________________________________
|
|
May 10th, 2011, 08:37 PM | #598 |
ninjette.org certified postwhore
Name: Scott
Location: Carlise Ohio
Join Date: Apr 2010 Motorcycle(s): Yahama v star 650 classic Posts: A lot.
|
I ran my car into the trash can and knocked it over onto the Ninjette,(plasic trash can). Then I just orderd new brakes for it.
__________________________________________________
|
|
May 10th, 2011, 09:01 PM | #599 | |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
For your bike or for your car?
Quote:
(shing, sparkle, sparkle)
__________________________________________________
|
|
|
May 10th, 2011, 09:14 PM | #600 |
ninjette.org certified postwhore
Name: Scott
Location: Carlise Ohio
Join Date: Apr 2010 Motorcycle(s): Yahama v star 650 classic Posts: A lot.
|
Haha brakes on the car work great! It's my driving skills.
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|