December 4th, 2018, 11:30 AM | #41 |
ninjette.org newbie
Name: Fernando
Location: Nova Scotia
Join Date: Sep 2018 Motorcycle(s): Cbr f4i and ninja 250 Posts: 8
|
a few shot from the ground one vs the untouch one yet. If you look inside, you’ll see 4?(teeth) towards the inside of the tube. Didn’t see those in the above thread so I’m confused about it. The bushing still rotate but don’t come out?? I ties with PVC on the concrete and the teeth broke the tip of the PVC.
https://i.imgur.com/DOus5Wn.jpg https://i.imgur.com/sAQQ3yr.jpg |
|
December 4th, 2018, 10:30 PM | #42 |
ninjette.org certified postwhore
Name: dino
Location: Oceanside, Ca
Join Date: Nov 2010 Motorcycle(s): '09 250 Street, '09 250 Race, '13 300 Race Posts: A lot.
|
Don't worry about the four teeth. I used a ~1" wooden dowel($4 at hw store) to punch out the bushing after grinding. Check you ID of the tube and buy the largest dowel that will fit.
__________________________________________________
CVMA #55 Last futzed with by dino74; December 4th, 2018 at 11:54 PM. |
|
December 5th, 2018, 03:43 AM | #43 |
ninjette.org newbie
Name: Fernando
Location: Nova Scotia
Join Date: Sep 2018 Motorcycle(s): Cbr f4i and ninja 250 Posts: 8
|
Thanks Dino, I got it! I use a steel bar that I had laying around. I wrapped it in tape to protect the tube. Really good write up! Made the job easy.
|
|
December 5th, 2018, 07:42 AM | #44 |
ninjette.org certified postwhore
Name: dino
Location: Oceanside, Ca
Join Date: Nov 2010 Motorcycle(s): '09 250 Street, '09 250 Race, '13 300 Race Posts: A lot.
|
One tidbit I learned since the write up. Before you tighten the cartridge to the lower, reassemble the upper and lower first. Put the cartridge in and hand tighten the bolt. To help center it, put the cap on without the springs.
__________________________________________________
CVMA #55 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[roadracingworld.com] - Video: Installing Öhlins 30mm Fork Cartridges On A Honda CBR1 | Ninjette Newsbot | Motorcycling News | 0 | February 8th, 2015 09:50 AM |
TWF Racing Cartridges. | shane liberty | Ninjettes At Speed | 13 | June 3rd, 2014 03:12 PM |
- - - WTB Rear Shock & Cartridges 08-12 - - - | Triple R | Items Wanted | 2 | May 19th, 2014 08:59 AM |
WTB andreani fork cartridge kit | chugs | Items Wanted | 0 | February 15th, 2014 10:47 PM |
Installing New AP Exhaust | xaple | 2008 - 2012 Ninja 250R Tech Talk | 9 | September 29th, 2012 08:23 AM |
|
|