November 18th, 2012, 12:15 PM | #81 |
ninjette.org sage
Name: Jim
Location: NJ
Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913
|
Is that a stock master and good power and feel? Thank you for the links and pics. I ended up grabbing a right side 2002 GSXR 750 4 piston caliper to adapt.
Last futzed with by old3; November 18th, 2012 at 02:06 PM. |
|
November 18th, 2012, 08:40 PM | #82 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Yes it's stock master and the power and feel is very good, braking a little bit harder is like throwing the anchor compared to stock.
Most of the time I only use one finger for braking since I also have steel braided brakelines. Also the rear brake is much stronger then oem and with all the other mods my bike has a power gain there's the need to have stronger brakes. Since the brakes at the 250 aren't the best I wonder why Kwaki's using the same s**t at the 300? But that's their way of saving money. |
|
November 20th, 2012, 04:04 PM | #83 |
ninjette.org sage
Name: Jim
Location: NJ
Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913
|
Excellent, thank you!
|
|
November 20th, 2012, 05:58 PM | #84 | |
ninjette.org member
Name: Hien
Location: Vancouver,BC
Join Date: Feb 2012 Motorcycle(s): triumph Posts: 116
|
Quote:
The front adapter is pretty nice piece though, which brembo caliper and disc are you running? |
|
|
November 24th, 2012, 12:14 AM | #85 | |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Quote:
The caliper I'm using is this: http://japan.webike.net/products/154219.html The brake disc was especially made from a german company for my bike on my request. |
|
|
February 28th, 2013, 06:42 PM | #86 |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Is there a good thread on improving the caliper? It sounds like it'd be a worthwhile mod on the 300 but I'm not that aware of how the braking system goes together. Would buying the two items Somchai linked to be sufficient or do I need a custom disc like he got made?
Sorry for the full on newb mode questions. |
|
February 28th, 2013, 06:44 PM | #87 | |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Quote:
|
|
|
March 2nd, 2013, 05:57 AM | #88 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
Sorry about the link, here is the picture of my calipers
|
|
March 2nd, 2013, 09:20 AM | #89 | |
former ninja 250'er
Name: Geo
Location: NE Ohio
Join Date: Jan 2013 Motorcycle(s): Aprilia 1000R, CRF450, CBR600RR tracktoy, Ninja 250 -- GONE!!!!! Posts: 153
|
Quote:
|
|
|
March 2nd, 2013, 07:37 PM | #91 |
Freedom for Germany
Location: This World
Join Date: May 2011 Motorcycle(s): Ninja 250R-FI Posts: A lot.
|
|
|
March 31st, 2013, 12:34 PM | #92 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Does anyone know if the PCV for the ninja 250 will fit the 300? @kbryant
|
|
April 1st, 2013, 08:13 AM | #93 |
ninjette.org member
Name: Shawn
Location: Ocala, Fl
Join Date: Mar 2013 Motorcycle(s): 05 Kawasaki Ninja 250R Posts: 37
|
I've read the thread and i don't think I've seen confirmation if the rear wheel fits on the ex250. Does anyone know?
|
|
April 1st, 2013, 08:35 AM | #94 |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
From what I've read they are definitely not the same wheel design, but they may still be compatible. I can see the allure of getting a wheel designed for the extra width on a 250 so I'm interested in this answer myself
|
|
April 2nd, 2013, 01:43 AM | #95 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Will the brake lines carry over? I'm in no mood of giving away my SS break lines to the new owner. What about brake pads? are they the same as well?
|
|
April 2nd, 2013, 06:40 AM | #96 |
ninjette.org member
Name: Aaron
Location: New Orleans
Join Date: Oct 2012 Motorcycle(s): 2013 Ninja 300 Posts: 159
|
Everything that I have seen says that the pads and lines are the same.
__________________________________________________
~B. |
|
April 15th, 2013, 01:16 AM | #97 |
ninjette.org member
Name: Nasty
Location: East Bay - CA
Join Date: Jan 2013 Motorcycle(s): 2013 Ebony Ninja 300 Posts: 55
|
Can anybody confirm the size of the swingarm spools? I want to buy a set for me and a friend (300 & 250), but there is a no return policy on sale items..
Also, I'm completely new to stands. Will a swingarm stand fit both? How about a front fork stand? Any other stands that I'm missing? TY!
__________________________________________________
-Need tips/have tips to give on buying a new bike? Visit my thread. Add your input! http://www.ninjette.org/forums/showthread.php?t=122975 |
|
April 15th, 2013, 02:53 AM | #98 | |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Quote:
Stands are adjustable; they're typically not specific to any bike at all. |
|
|
April 15th, 2013, 06:16 AM | #99 |
ninjette.org member
Name: J
Location: Toronto
Join Date: Sep 2012 Motorcycle(s): Ninja 300 Posts: 103
|
Some spools require spacers. I gambled and bought these off eBay, they fit!
http://www.ebay.com/itm/280964608617?item=280964608617
__________________________________________________
My Ninja 300 Build Photoblog Greater Toronto Area 250/300 Riding Group |
|
April 15th, 2013, 09:53 PM | #100 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
I think I remember reading somewhere that KTM 10mm spools won't work, but otherwise any should be fine. Just remember to throw on a bit of locktite too.
|
|
April 16th, 2013, 08:38 AM | #101 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
Conflicting reports on the correct thread pitch (I forget which is correct) Threads often need to be re-tapped even new from the factory. KTM probably uses the other thread pitch. |
|
|
May 23rd, 2013, 12:49 PM | #102 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
Anyone knows if the 300throttle bodies fit the 250? They are 32mm as compared to 28mm on the ninja
|
|
May 26th, 2013, 01:13 AM | #103 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
|
|
May 26th, 2013, 07:08 AM | #104 | |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Quote:
Also remember that injectors have a minimum pulse width that can make idling difficult for a small engine with large throttle bodies (that need large injectors for 14,000 rpm performance with those large TB's). Unless you have some major internal engine modifications and you really know what you're doing, you're better off sticking with the 28mm TB's and stock injectors. I'd look more into getting a Power Commander that's able to control the ignition angle, take it to a dyno guy to have him adjust the fuel delivery and ignition timing perfectly for the highest octane gas you can consistently get your hands on. |
|
|
July 10th, 2013, 09:22 PM | #105 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
will the pregen stock rear sets work on the new gen 08-12? I'm looking at cheap alternatives for replacements
@Alex, is it possible to make this a sticky somewhere?
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
July 11th, 2013, 02:06 PM | #106 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
|
|
July 11th, 2013, 08:47 PM | #107 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Thanks, Chris! I'll see if I can find one local and test it out
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
July 12th, 2013, 07:43 PM | #108 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
July 22nd, 2013, 11:36 AM | #109 |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
Has anyone confirmed if the engine mounts are or are not interchangeable between the different generations? I can't tell from the diagrams. I'd love to have the dampers on my pregen.
Pregen 32029 32029-1542 BRACKET-ENGINE,HEAD,LH 32029A 32029-1543 BRACKET-ENGINE,HEAD,RH Newgen 31059 31059-0001 BRACKET-COMP-ENGINE,LH 31059A 31059-0002 BRACKET-COMP-ENGINE,RH 300 31059 31059-0061 BRACKET-COMP-ENGINE,LH 31059A 31059-0062 BRACKET-COMP-ENGINE,RH
__________________________________________________
Unregistered found this post helpful. Track Day Preparation Checklist 1. Financial 2. Mental 3. Physical 4. Gear / Bike |
|
September 17th, 2013, 12:31 PM | #110 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
the Pregen rearsets fit on the new gens
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
October 9th, 2013, 08:48 AM | #111 | |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Quote:
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
|
October 17th, 2013, 09:39 AM | #112 |
ninjette.org member
Name: Alex
Location: Chicago
Join Date: Apr 2013 Motorcycle(s): Daytona 675 Posts: 79
|
Wait, with this rear brake, is the caliper below the swingarm rather than above? It could make wheel changes quite a bit easier.
EDIT: Found a close up of it installed and it does, sweet! Last futzed with by Knolly; October 17th, 2013 at 01:01 PM. |
|
January 27th, 2014, 08:47 PM | #113 |
Ninja Parts Master
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366
|
If anyone has questions about what parts fit what, we have plenty of 250 and 300s sitting around in various states of repair/disassembly. We can quickly answer most questions. It would be nice if you bought something in the process too
__________________________________________________
Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja |
2 out of 2 members found this post helpful. |
January 28th, 2014, 04:20 PM | #114 |
ninjette.org guru
Name: harry
Location: Central Florida
Join Date: Sep 2013 Motorcycle(s): 2006 Ninja 250, 2004 Buell XB12s, Honda 110 Elite Posts: 332
|
Will the front brake rotor from a new gen, or 300 fit a pre gen wheel?
__________________________________________________
"They don't pay me enough to ride this thing!" Kenny Roberts after winning the Indy Mile on the TZ750 powered Grand National bike. |
|
January 28th, 2014, 05:42 PM | #115 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
|
|
January 29th, 2014, 03:11 AM | #116 |
ninjette.org guru
Name: harry
Location: Central Florida
Join Date: Sep 2013 Motorcycle(s): 2006 Ninja 250, 2004 Buell XB12s, Honda 110 Elite Posts: 332
|
I know the rotors are larger. What I was asking is will it bolt to a pre gen wheel. Is the center hole the same, and the bolt pattern?
Thanks, Fast
__________________________________________________
"They don't pay me enough to ride this thing!" Kenny Roberts after winning the Indy Mile on the TZ750 powered Grand National bike. |
|
February 26th, 2014, 07:30 PM | #117 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
Will the 250 08-12 rear hugger will fit the 300
|
|
February 26th, 2014, 08:25 PM | #118 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
|
|
February 26th, 2014, 08:34 PM | #119 |
ninjette.org member
Name: red
Location: KL, Malaysia
Join Date: Apr 2013 Motorcycle(s): Ninja 250R, GSXR600 K4, KX250F,NSR150SP, Yamaha TZM150 Posts: 68
|
Haven't tried the disc comparison yet but other than the bolt pattern you must consider the caliper mount
|
|
February 27th, 2014, 08:09 AM | #120 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? | PartsNinja | Motorcycle-related | 75 | October 23rd, 2016 04:08 PM |
Talk about wrong time, wrong place | tlhamon | General Motorcycling Discussion | 8 | February 1st, 2015 12:07 PM |
Will certain parts from my old 250r that will fit the new 300? | Hitman | 2013 - 2017 Ninja 300 Tech Talk | 4 | October 20th, 2012 06:59 AM |
[topix.net] - On Two Wheels: It's time to talk laws and safety for motorcyclists | Ninjette Newsbot | Motorcycling News | 0 | June 15th, 2011 03:20 AM |
[topix.net] - Bike Helmet With Built In Headset Lets You Ride And Talk At Same Time | Ninjette Newsbot | Motorcycling News | 0 | January 10th, 2011 02:20 PM |
|
|