Ecotrons Kit & Vendor Info

[choneofakind]

oh right, @Jiggles you suck

[mugenbb6]

Can ecotrons simply improve all the problems that super-tune exposed and release an updated kit based on that? Except for the oem tb, seems to me they're all just nickel and dime problems.

[ecotrons]

Here is the picture of new pressure regulator. It has barbed inlet and outlet now. It will replace the previous versions. It may be a "small" change, but it gets rid of the issue of "fall-off" high pressure fuel line if it is possible, gives you peace of mind, on this part.

More improvements are coming.

[mugenbb6]

Great to see a vendor that listens.

[n4mwd]

Originally Posted by mugenbb6

Can ecotrons simply improve all the problems that super-tune exposed and release an updated kit based on that? Except for the oem tb, seems to me they're all just nickel and dime problems.

Exactly. Actually, I think you mean the ecotrons TB. The Kawasaki OEM TB is nearly flawless.

With all due respect to Matt, the kit doesn't have any major problems with the exception of the TB. While its NICE to have barbs on the pressure regulator, its not a major issue. Anybody having problems can use safety wire to hold them on. Same thing for the fuel pump. The fuel tap problems are more significant, but there are workarounds for that too. The problems with the ecotrons TB are a showstopper as far as I'm concerned.

But even still, the kit is a good value. Buying all the parts elsewhere less the TB and you'll easily be over what ecotrons charges. I think its best to think of it as a kit that comes with a temporary TB that will do until you get a better one.

Sorry if I sound like a broken record.

Just thinking out loud, but if they can make a regulator out of white nylon, then why can't they make a throttle body out of it? It would seem like an inexpensive way to go.

[Jiggles]

Blurmp

For anything not relating to the install

[ecotrons]

Dear Ecotrons Customers,

check out the new throttle body for Ninja 250r EFI kit:
http://www.ecotrons.com/Ecotrons_Kaw...dy_2x28mm.html

Everyone who bought an Ecotrons Ninja 250r EFI kit with Ecotrons' old gen throttle body should be qualified to get a new gen throttle body as an upgrade given the below 2 conditions are satisfied:
1) you have not done destructive changes to the EFI kit;
2) For group buyers, if you have not installed the kit, you agree you will install the kit; and you would not request the new TB for the reselling purpose, since you got discounts.
Some shipping cost may be asked.

Please contact me at info@ecotrons.com for the agreement on the deal.

Matt of Ecotrons

[High gloss]

Would I be right in thinking that super tune is richard buckner from high gain tuning.
It certainly reads like that.
Oh well enough that ectron sure looks the goods

[Jiggles]

I remember reading about HGT and the consensus was that they were buying ecotrons kits, repackaging them, installing custom firmware, and selling them at 2x the price

If that is him, idk why he is so mad, seems like a sweet gig

[ninja_thresh_hold]

but what exactly is the problem here? from what i can tell you ALL agreed to the price at hand, and all kits are the same, are the kits not functioning as intended? ive never heard of the kit having problems before, and another thing... jiggles is not, and never has been affiliated with electrons, he is just a member of this forum like anyone else here, who was trying to be nice and set up a group buy to save you all money on something that in my opinion is definitively worth it.

[NathanUc]

h.o.l.y hell I'm glad I didn't take part....

[lgk]

Originally Posted by NathanUc

h.o.l.y hell I'm glad I didn't take part....

I have been riding a converted bike for two months now with no issues.