April 23rd, 2022, 11:08 AM | #1721 |
ninjette.org newbie
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022 Motorcycle(s): 2012 ninja 250r Posts: 4
|
I'm sorry if this is a little off topic or if there is another thread for this info. I'm looking for the A2L and CAL file to run the ecotrons software for the Gen 2 efi kit. 2012 ninja 250. Tried contacting them directly and I'm not too happy with their support, or lack thereof.
|
|
May 6th, 2022, 05:22 PM | #1722 | |
Its not a 250,its a Ninja
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012 Motorcycle(s): '11 CBR250R, '22 CFMOTO 300NK Posts: 278
|
Quote:
forgive me please if you already saw this page. |
|
|
May 7th, 2022, 12:48 PM | #1723 |
ninjette.org newbie
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022 Motorcycle(s): 2012 ninja 250r Posts: 4
|
No, but thanks for replying! I have since got the files I needed to connect the laptop to the ecu thankfully.
|
|
May 7th, 2022, 07:05 PM | #1724 |
Its not a 250,its a Ninja
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012 Motorcycle(s): '11 CBR250R, '22 CFMOTO 300NK Posts: 278
|
|
|
May 8th, 2022, 12:09 AM | #1725 |
ninjette.org newbie
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022 Motorcycle(s): 2012 ninja 250r Posts: 4
|
Pretty much. I got the files I needed to connect to the ecu to the laptop. It was weird. I had it running pretty good. Idle was hunting, but I was able to ride it fine. Then one day I just lost crank signal all of a sudden. Wouldnt start. Replaced the crank sensor and stator. Still wouldn't fire. Then I finally got the files. Got it to connect, and cranked it just to see if I could see signal on the laptop and it miraculously fired. Not sure why I lost signal.
|
|
May 8th, 2022, 09:34 PM | #1726 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
The Ecotrons ECU randomly loses its memory and settings. Have to reload the files to restore functionality. Search for other's reports, you're not 1st or only one with this issue.
|
|
May 18th, 2022, 05:12 PM | #1727 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Can anyone tell me if there is an easy way to tell which connector is for injector 1 & injector 2 as they are no longer marked and have the same color coded wires?
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
May 18th, 2022, 10:56 PM | #1728 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Shouldn't matter as they're not sequentially fired anyway. Unless you added cam-sensor?
|
|
May 19th, 2022, 10:52 AM | #1729 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
According to this thread it tunes each cylinder individually so I think it does matter.
I guess worse come to worse I have a 50/50 chance.
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
May 19th, 2022, 12:51 PM | #1730 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Found the answer in a newer version of the manual than I had:
Pin 15 = Inj2 and Pin 16 = Inj1.
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
May 23rd, 2022, 11:51 AM | #1731 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Do they even make 3/16" Fuel injection hose for the return line?
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
May 29th, 2022, 05:40 PM | #1732 |
Its not a 250,its a Ninja
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012 Motorcycle(s): '11 CBR250R, '22 CFMOTO 300NK Posts: 278
|
I have had no issues getting any of the lines needed for any of my projects at my Advance Auto. They cut hose to length, just be sure to specify for a fuel injection job up front. Customer service is a thing of the past...
|
|
May 31st, 2022, 02:17 PM | #1733 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Thanks for the reply, I'll see if there are any in Honolulu.
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ecotrons tech questions. | bigbadbob | 1986 - 2007 Ninja 250R Tech Talk | 1 | April 17th, 2015 10:50 AM |
Ecotrons map | swarfman64 | 2008 - 2012 Ninja 250R Tech Talk | 2 | January 15th, 2015 06:09 AM |
WTB:Ecotrons petcock | crimsondragon | Items Wanted | 2 | September 21st, 2014 06:54 AM |
Ecotrons kit | garth285 | Items Wanted | 0 | June 17th, 2014 05:09 PM |
Ecotrons Gen2 FI Kit Install | Terminal | 1986 - 2007 Ninja 250R Tech Talk | 85 | October 15th, 2012 02:02 PM |
|
|