June 28th, 2009, 12:51 PM | #161 |
ninjette.org member
Name: Jason
Location: Federal Way / Spokane
Join Date: May 2009 Motorcycle(s): Looking For 2008 Ninja 250R Posts: 84
|
Oh no! Mine was delivered to my SCHOOL address on campus. I'm across the state at home! Guess I'll have to get in touch with them and see if they can forward it over here. Thanks Kim
|
|
June 28th, 2009, 02:08 PM | #162 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Dan, I can only reply regarding resistors vs new relay if you're keeping the stock blinkers too (which you seem to be doing), but yes, only nedd the new relay. I suspect (from my own minor electrical knowledge and numerous other posts) that'd you'd be fine with the relay if you were pulling the stock blinkers too but would need resistors if you're doing replacement of the front blinkers as well.
I just paired the positives from the integrated blinker with the positive from the correct stock blinker. If you're pulling the lights, should be able to plug the provided pin on the integrated directly into the spade-female on the stock connector. I promise I'll post some pics of how I did it soon as I find my camera (it's been MIA a couple days). The tail light plug is designed just like the plug from the light bulb you'll be pulling from your stock light so just plug it in like you would the bulb. But BE CAREFUL with the socket on the integrated light, it is a little fragile, as is the solder on the ground (ask me how I know) .
__________________________________________________
Proud member of the Blue Army |
|
June 28th, 2009, 04:56 PM | #163 |
420 President
Name: John
Location: SoCal 818
Join Date: Jun 2009 Motorcycle(s): 09 Ninja grass color Posts: 96
|
got mine! nice piece, now i gotta wait to install, who knows how long
|
|
June 29th, 2009, 07:58 AM | #164 |
ninjette.org member
Name: ben
Location: owensboro ky
Join Date: Jun 2009 Motorcycle(s): 2009 ninja 250r Posts: 50
|
the fl-32 relay does work 8 bucks at atuozone i bought it and installed last night and all works well. i removed my factory rear blinkers and pulled the wires from the socket and connectd the wires that way and all works well.
|
|
June 30th, 2009, 01:18 AM | #165 | |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
Quote:
|
|
|
June 30th, 2009, 04:07 AM | #166 | |
ninjette.org member
Name: Nate
Location: Alabama
Join Date: Dec 2008 Motorcycle(s): Ninja 250R Posts: 28
|
Quote:
|
|
|
June 30th, 2009, 07:36 AM | #167 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
Dan, you will need to do the diode fix - look in the proton thread - somewhere around the last page has info about what to do in this situation
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
June 30th, 2009, 09:22 PM | #168 | |
ninjette.org member
Name: Ken
Location: NY
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129
|
Quote:
I also removed the wires from the stock rear blinker socket and connected to the integrated tail. I used a TRIDON brand EL12 Electronic Flasher from my local Advance Auto Parts and it works well with just the integrated in the rear and stock fronts. |
|
|
June 30th, 2009, 11:02 PM | #169 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
omfg, i just checked out the proton thread as noche suggested....wow, a whole lot of confusion there..........My proton flushmounts dont function as running lights so there isnt any extra current on those...but the tail light will function as running light...I dont know if I need diodes just yet, I hope not...
I had the bike lights no cut fender elim kit hooked up with the led rear signals, and they worked fine with the proton fronts, but I did have resistors hooked to the rear led's..btw-bike lights no cut fender elim-$75 improper display of registration ticket...So I'll let everyone know if my bikemonkey tail light will work with the proton front signals without diodes(hopefully!!!) |
|
June 30th, 2009, 11:04 PM | #170 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
as soon as it grtz here
|
|
July 1st, 2009, 04:21 AM | #171 |
ninjette.org member
Name: Nate
Location: Alabama
Join Date: Dec 2008 Motorcycle(s): Ninja 250R Posts: 28
|
You will need diodes because your installing leds on all four corners, might as well find some now while your waiting for the light to arrive.
|
|
July 1st, 2009, 05:37 AM | #172 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
why didnt I need diodes b4? I had led's all 4 corners
|
|
July 1st, 2009, 04:29 PM | #173 |
ninjette.org member
Name: Carl
Location: Adelaide
Join Date: May 2009 Motorcycle(s): street triple Posts: 29
|
I'm not quite sure where this diode thing has come from. I do not know anyone who runs Flushmounts and Integrated Turn Signals with diodes. I would suggest you buy a better quality LED Relay first
|
|
July 1st, 2009, 04:51 PM | #174 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
hey thankz 4 the reply I got yer email, I appreciate yer help..I ordered the acumen relay, I'm still waitin on the tail light and all this talk about diodes got me all worried....so I'll try it with the acumen relay ...thankz
|
|
July 7th, 2009, 01:17 PM | #175 |
ninjette.org member
Name: Jason
Location: Federal Way / Spokane
Join Date: May 2009 Motorcycle(s): Looking For 2008 Ninja 250R Posts: 84
|
If anyone didn't get in on this group buy I am selling my tail light as plans aren't going according to plan. PM me and we can discuss
|
|
July 7th, 2009, 02:15 PM | #176 |
ninjette.org member
Name: Lee
Location: Alabama
Join Date: May 2009 Motorcycle(s): 2009 Kawasaki Ninja 250r se Posts: 169
|
I am kinda in the same boat. Took the fairings off today and was about to break the plastic bag. Then thought i could really use the money more than the light at this point in time because of unexpected expenses and the fact i plan to get the GB exhaust. If i can't sell it i have no problem using it but could really use the moeny. PM me if you are interested but buy Jason's first Thanks
|
|
July 10th, 2009, 11:46 AM | #177 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
Its confirmed...U do not need resistors or a diode to run the bikemonkey led taillight with the proton led front turn signals..U do need to change the relay though....I got the acumen universal led relay, and everything works fine...
|
|
July 10th, 2009, 12:16 PM | #178 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
Dan, you have removed the stock rear signals, correct?
__________________________________________________
Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders |
|
July 10th, 2009, 12:18 PM | #179 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
yea, I'm all LED front and rear...
|
|
July 12th, 2009, 10:58 PM | #180 |
ninjette.org guru
Name: Dan
Location: Chicago, il....
Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378
|
Scratch that confirmation on the no diodes needed..I noticed 2 night that the opposite blinker that I have activated flashes a little when I turn on the signals..This sucks!!!!! I guess bikemonkey doesnt know any 1 that runs his integrated tail light with protons without diodes with no problems on a new gen ninja 250....
|
|
July 16th, 2009, 11:03 AM | #181 |
ninjette.org member
Name: Daniel
Location: SW Texas
Join Date: Jun 2009 Motorcycle(s): 08 Ninja 250 Posts: 87
|
Bikeboyben: I noticed on the FL32 Relay it says to use a 25 amp fuse. Do you know if this is needed or does anyone else have any ideas? Dont want to end up burning a wire or anything. Just a thought! Let me know if all is good!
|
|
July 27th, 2009, 09:11 AM | #182 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
no just use the stock fuse.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Group buy for Ninja 300 Integrated LEDs | CThunder-blue | Motorcycle-related | 26 | December 10th, 2013 03:22 PM |
P&P Brake light modulator Group Buy | CThunder-blue | Motorcycle-related | 66 | July 16th, 2011 09:30 AM |
Integrated LED Tail light - Bulk, Group or Single Buy | ThaiNinjaRR | Motorcycle-related | 41 | August 5th, 2010 01:48 PM |
GROUP BUY 08+ LED Integrated Tail Light | jonthechron | Motorcycle-related | 79 | April 12th, 2010 10:30 AM |
|
|