Sportisimoto-usa.com - Page 6

divingtigger · January 17th, 2010, 09:07 AM

I'd say low to mid as this is going to be a city only bike which might see 90 km/h less than once a month
Posted via Mobile Device

ztrack157 · January 17th, 2010, 09:57 AM

That is actually the one we are going to use. And it is still pretty good up top.

austexjg · January 17th, 2010, 05:06 PM

I personally would perfer top end, but if the difference is only minimal on the top end, than the mid range option would be best. What did the dyno say?

ztrack157 · January 17th, 2010, 05:26 PM

Waiting on the sheet. Should have it tonight

ztrack157 · January 18th, 2010, 10:23 PM

Still waiting on the sheets. We're trying one more pipe design to try to get the max out of the system. The system will require a header wrap near the coolant tank. I am debating on selling it with the exhaust at the $499 price or dropping the price to $475 so the customer has their choice of header wraps.

Ken08Ninja · January 18th, 2010, 11:23 PM

Matt, what about Jet Hot or someother ceramic coating. That should keep the heat in the pipe.
Posted via Mobile Device

ztrack157 · January 18th, 2010, 11:44 PM

its to close to even gamble but if the customer chooses they can do it. I don't have the ability to ceramic coat.

2WheelGuy · January 19th, 2010, 12:16 AM

I'd sell the pipe with the header wrap if it needs it. Otherwise people will install it without the wrap then bitch when things start melting. Charge a few bucks more and save yourself some headaches.

divingtigger · January 19th, 2010, 06:57 AM

Quote:

Originally Posted by 2WheelGuy

I'd sell the pipe with the header wrap if it needs it. Otherwise people will install it without the wrap then bitch when things start melting. Charge a few bucks more and save yourself some headaches.

Ya that's what I'd think too....there's no one over there that will ceramic wrap?? I wouldn't worry about giving any options on the wrap just do it in one colour and there is no worry about it being put on, not put on right or any other issue that might come up, with the fairings on you won't be able to see the wrapped section anyways. The only thing I would do is wrap the majority of the pipe that is running inside the fairings that way you won't get any surprise issues down the road from the heat coming in contact in other areas that aren't so obvious, but I guess that is something that I could do once I get the pipe

austexjg · January 19th, 2010, 09:07 AM

Will any additional mods need to be made when adding the new exhaust - rejet kit? shim?
I too would add the wrap to the price.

ztrack157 · January 19th, 2010, 10:48 AM

On a stock bike there is a chance only a shim will be needed in most of the US. Since we went from a 108 to a 98 main jet with an open pod filter in Indonesia (typically they run high jetting in their climate). We will have a recommended jetting start point which owners can then tweak to their climate.

ztrack157 · January 20th, 2010, 09:40 PM

Needle jets anyone. First 1000 jet kits are almost done being assembled.

k-os · January 21st, 2010, 01:02 AM

Any word on those test kits? Or will those kits be part of the first 1000 kits?

ztrack157 · January 21st, 2010, 09:47 AM

They will be part of it. The rest of the kits should be ready next week. But I needed some stuff shipped asap so I will have the testers needles here but I will be waiting on the rest of the kits.

ztrack157 · January 21st, 2010, 11:04 PM

The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

Rexbo · January 21st, 2010, 11:51 PM

quit teasing. exhaust pics

divingtigger · January 22nd, 2010, 06:21 AM

When I saw the notification in my email I thought you were talking about the undertail exhaust coming with a tail light

welcome2thedawn · January 22nd, 2010, 10:11 PM

i like the looks of that undertail....i broke the thin piece that goes over the top of my tail light on my hotbodies undetail...actually had a feeling it would happen since it is so thin....been glueing and fiberglassing to fix it....what a pain.......

wellcraft · January 22nd, 2010, 10:15 PM

Love that undertail since day one. What's going to be the price?

Quote:

Originally Posted by ztrack157

The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

wellcraft · January 22nd, 2010, 10:18 PM

BTW Matt, when are you planning to get the tester needle jet kits? I'll be ordering a Yoshi CF full exhaust between tomorrow and monday and I was wondering if I could qualify for the needle jet kits. I ask because I have to rejet since I'm getting a new exhaust. the same time I'll be ordering the K&N pod filter and do all the mod from the DIY.

Thanks in advance

ztrack157 · January 23rd, 2010, 10:02 AM

The needles I have coming in next week for the tester batch. I'm waiting for the full jet kits before my testers get theirs though.

randomwalk101 · January 27th, 2010, 04:27 PM

The needle shipment comes in with the hugger batch due to be received this week? How confidence are we in receiving the batch? Been delayed for awhile..
Posted via Mobile Device

ztrack157 · January 27th, 2010, 05:07 PM

Needle Shipment is due in on the 29th. Huggers are clearing US customs right now. The Needle Shipment was only delayed about 4 days. The Huggers I was pissed about because I should have had them around the 10th.

MKlein3004 · January 27th, 2010, 05:24 PM

*cough* pics of undertail exhaust *cough*

lol

randomwalk101 · January 28th, 2010, 11:09 AM

Cool so it's on us ground. How long does it usually take to clear custome and for you to receive it? Hope all is well.
Posted via Mobile Device

ztrack157 · January 28th, 2010, 11:15 AM

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

divingtigger · January 28th, 2010, 01:13 PM

Quote:

Originally Posted by ztrack157

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

Does that mean it is time for me to get excited too??? Just had a blizzard earlier this week and finally getting the roads clear....not even close to bike weather...but I am glad I drive a 4x4

ztrack157 · January 28th, 2010, 01:26 PM

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

divingtigger · January 29th, 2010, 06:37 AM

Quote:

Originally Posted by ztrack157

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

Remember that my tail is for exit only so don't make any new holes or shove anything into the existing holes that are larger than the original dimensions....actually don't shove anything into any existing holes

wellcraft · January 29th, 2010, 07:53 AM

WTF

Quote:

Originally Posted by ztrack157

Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail.

wellcraft · January 29th, 2010, 07:55 AM

Your SCREW

Quote:

Originally Posted by divingtigger

Remember that my tail is for exit only so don't make any new holes or shove anything into the existing holes that are larger than the original dimensions....actually don't shove anything into any existing holes

tiburonsita · January 29th, 2010, 10:48 AM

Quote:

Originally Posted by ztrack157

The Newest undertail to be available in the states in a few months. Comes with a built in tail light.

that looks hot.

randomwalk101 · January 30th, 2010, 10:36 AM

Quote:

Originally Posted by ztrack157

Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow.

Are they in matt? Can wait to get them
Posted via Mobile Device

mike_sema · January 30th, 2010, 11:39 AM

hey matt I have an off ?? when stuff you order goes to custom in San Francisco how long dose it normally take to get to you. I have been waiting for something that I ordered from Japan that hit customs on the 24th

ztrack157 · January 30th, 2010, 11:36 PM

Customs can take up to a week and a half to clear.

Huggers are in (09 blue sold out already). Undertails too. Rob your tail is sitting on my couch.

Duvivr6 · January 31st, 2010, 07:16 AM

so which one you have in stock?

austexjg · January 31st, 2010, 09:52 AM

Is it the new undertails with light?

ztrack157 · January 31st, 2010, 12:11 PM

New undertails with lights aren't available yet.

Huggers: Kawi Green, 08 black, 08 red, 08 blue
Under tails: Daytona blue, CPB, Kawi green, 08 Red, 08 Black

DEXSPEED · January 31st, 2010, 12:30 PM

any discount on the kitaco's?

ztrack157 · January 31st, 2010, 12:46 PM

Nope. And I just sold the last set. I need to order some more.

January 17th, 2010, 09:57 AM	#202
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	That is actually the one we are going to use. And it is still pretty good up top. __________________________________________________ Sportisimoto USA is born.

January 17th, 2010, 05:26 PM	#204
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Waiting on the sheet. Should have it tonight __________________________________________________ Sportisimoto USA is born.

January 18th, 2010, 10:23 PM	#205
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Still waiting on the sheets. We're trying one more pipe design to try to get the max out of the system. The system will require a header wrap near the coolant tank. I am debating on selling it with the exhaust at the $499 price or dropping the price to $475 so the customer has their choice of header wraps. __________________________________________________ Sportisimoto USA is born.

January 18th, 2010, 11:44 PM	#207
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	its to close to even gamble but if the customer chooses they can do it. I don't have the ability to ceramic coat. __________________________________________________ Sportisimoto USA is born.

January 19th, 2010, 12:16 AM	#208
2WheelGuy ninjette.org certified postwhore Name: Craig Location: Silicon Valley, CA USA Join Date: May 2009 Motorcycle(s): '98 EX250, '02 EX250, '08 250r, '03 SV650, '98 GSXR750 '03 Hayabusa, '87 YSR50, '84 ZX900, +MORE Posts: A lot.	I'd sell the pipe with the header wrap if it needs it. Otherwise people will install it without the wrap then bitch when things start melting. Charge a few bucks more and save yourself some headaches. __________________________________________________ CraigHarris.org Pacific Track Time CraigsWeb See you at 2014 MotoGP Laguna Seca! We'll be camping on Fox Hill. AFM #278

January 17th, 2010, 09:07 AM	#201
divingtigger Pedal Power Name: Rob Location: Winterpeg (Winnipeg) Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401	I'd say low to mid as this is going to be a city only bike which might see 90 km/h less than once a month Posted via Mobile Device

January 17th, 2010, 05:06 PM	#203
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	I personally would perfer top end, but if the difference is only minimal on the top end, than the mid range option would be best. What did the dyno say?

January 18th, 2010, 11:23 PM	#206
Ken08Ninja ninjette.org member Name: Ken Location: NY Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129	Matt, what about Jet Hot or someother ceramic coating. That should keep the heat in the pipe. Posted via Mobile Device

January 19th, 2010, 09:07 AM	#210
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	Will any additional mods need to be made when adding the new exhaust - rejet kit? shim? I too would add the wrap to the price.

January 19th, 2010, 10:48 AM	#211
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	On a stock bike there is a chance only a shim will be needed in most of the US. Since we went from a 108 to a 98 main jet with an open pod filter in Indonesia (typically they run high jetting in their climate). We will have a recommended jetting start point which owners can then tweak to their climate. __________________________________________________ Sportisimoto USA is born.

January 21st, 2010, 01:02 AM	#213
k-os ninjette.org sage Name: Andy Location: Sheboygan, WI Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890	Any word on those test kits? Or will those kits be part of the first 1000 kits?

January 21st, 2010, 09:47 AM	#214
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	They will be part of it. The rest of the kits should be ready next week. But I needed some stuff shipped asap so I will have the testers needles here but I will be waiting on the rest of the kits. __________________________________________________ Sportisimoto USA is born.

January 21st, 2010, 11:51 PM	#216
Rexbo CVMA / AFM / M1GP #250 Name: Steve Location: Los Angeles Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.	quit teasing. exhaust pics

January 22nd, 2010, 06:21 AM	#217
divingtigger Pedal Power Name: Rob Location: Winterpeg (Winnipeg) Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401	When I saw the notification in my email I thought you were talking about the undertail exhaust coming with a tail light __________________________________________________ Using Pedal Power

January 22nd, 2010, 10:11 PM	#218
welcome2thedawn ninjette.org guru Name: dawn Location: portland, or Join Date: Sep 2009 Motorcycle(s): 08 ninja 250r modded, 73 honda cl200, 74 kawasaki 400 triple Posts: 255	i like the looks of that undertail....i broke the thin piece that goes over the top of my tail light on my hotbodies undetail...actually had a feeling it would happen since it is so thin....been glueing and fiberglassing to fix it....what a pain.......

January 22nd, 2010, 10:18 PM	#220
wellcraft ninjette.org guru Name: JR Location: Augusta, GA Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432	BTW Matt, when are you planning to get the tester needle jet kits? I'll be ordering a Yoshi CF full exhaust between tomorrow and monday and I was wondering if I could qualify for the needle jet kits. I ask because I have to rejet since I'm getting a new exhaust. the same time I'll be ordering the K&N pod filter and do all the mod from the DIY. Thanks in advance

January 23rd, 2010, 10:02 AM	#221
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	The needles I have coming in next week for the tester batch. I'm waiting for the full jet kits before my testers get theirs though. __________________________________________________ Sportisimoto USA is born.

January 27th, 2010, 04:27 PM	#222
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	The needle shipment comes in with the hugger batch due to be received this week? How confidence are we in receiving the batch? Been delayed for awhile.. Posted via Mobile Device

January 27th, 2010, 05:07 PM	#223
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Needle Shipment is due in on the 29th. Huggers are clearing US customs right now. The Needle Shipment was only delayed about 4 days. The Huggers I was pissed about because I should have had them around the 10th. __________________________________________________ Sportisimoto USA is born.

January 27th, 2010, 05:24 PM	#224
MKlein3004 Fighting Texas Aggie '08 Name: Mitchell Location: Allen, Tx Join Date: Feb 2009 Motorcycle(s): 2008 Ninja 250r (Race), 2005 Kawasaki Ninja ZX-6R 636 (Track), 2005 Ducati Monster 620 (Street) Posts: 541	cough pics of undertail exhaust cough lol

January 28th, 2010, 11:09 AM	#225
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Cool so it's on us ground. How long does it usually take to clear custome and for you to receive it? Hope all is well. Posted via Mobile Device

January 28th, 2010, 11:15 AM	#226
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Generally 3 - 5 days. I am waiting on a call today to go get it. But I think I will get it tomorrow. __________________________________________________ Sportisimoto USA is born.

January 28th, 2010, 01:26 PM	#228
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Yup I finally get to play with your tail. wait that didn't sound right lol. I am interested to see the actual finish on the duc tail. __________________________________________________ Sportisimoto USA is born.

January 30th, 2010, 11:39 AM	#234
mike_sema ninjette.org guru Name: mike Location: tucson az Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371	hey matt I have an off ?? when stuff you order goes to custom in San Francisco how long dose it normally take to get to you. I have been waiting for something that I ordered from Japan that hit customs on the 24th __________________________________________________ 08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl

January 30th, 2010, 11:36 PM	#235
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Customs can take up to a week and a half to clear. Huggers are in (09 blue sold out already). Undertails too. Rob your tail is sitting on my couch. __________________________________________________ Sportisimoto USA is born.

January 31st, 2010, 07:16 AM	#236
Duvivr6 ninjette.org member Name: Duvi Location: Oklahoma City Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99	so which one you have in stock?

January 31st, 2010, 09:52 AM	#237
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	Is it the new undertails with light?

January 31st, 2010, 12:11 PM	#238
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	New undertails with lights aren't available yet. Huggers: Kawi Green, 08 black, 08 red, 08 blue Under tails: Daytona blue, CPB, Kawi green, 08 Red, 08 Black __________________________________________________ Sportisimoto USA is born.

January 31st, 2010, 12:30 PM	#239
DEXSPEED 2012 is here,let's ride!! Name: dex Location: visalia,ca. Join Date: Sep 2009 Motorcycle(s): 2009R,'12 suzuki +500 Posts: 354	any discount on the kitaco's?

January 31st, 2010, 12:46 PM	#240
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Nope. And I just sold the last set. I need to order some more. __________________________________________________ Sportisimoto USA is born.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where is Matt from Sportisimoto USA?	samw	Motorcycle-related	25	August 18th, 2012 12:50 PM
Sportisimoto VR Carbon FSE	NathanUc	2008 - 2012 Ninja 250R Farkles	12	July 28th, 2011 08:10 AM
My Sportisimoto Bodywork	ztrack157	Motorcycle-related	6	May 18th, 2011 02:39 PM
Sportisimoto BRT Ignitions GB	ztrack157	Motorcycle-related	77	July 27th, 2010 10:36 PM
Got a big box from Sportisimoto USA today	2WheelGuy	2008 - 2012 Ninja 250R Tech Talk	25	February 14th, 2010 08:27 AM