March 7th, 2013, 07:18 PM | #3281 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Orange. Of course it's got orange accents
|
|
March 7th, 2013, 07:23 PM | #3282 |
ninjette.org member
Name: Raygan
Location: North East Texas
Join Date: Oct 2012 Motorcycle(s): White 2013 Ninja 300(Storm), Silver 2003 Fjr1300 Posts: 173
|
installed A&L MotorSports rearset adapters.
__________________________________________________
ATGATT For all I know, women who ride motorcycles are all man-hating dominatrix's. It was like a mild panic attack! |
|
March 7th, 2013, 08:06 PM | #3283 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
The carb response has felt funny ever since I modded the carb spring so I checked to make sure I was still making good power on the way just now. Still gets 102mph on the GPS so it must just be my imagination
|
|
March 9th, 2013, 12:48 PM | #3284 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Cleaned and waxed the chain. Was going to install a battery tender connector cable but found one already installed.
|
|
March 9th, 2013, 04:52 PM | #3285 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
installed woodcraft rearsets, and clip-ons. changed oil, cleaned lubed chain.
all went well. only thing is i need to play with rearset position and shifter adjustment. shifter just felt a little high. |
|
March 9th, 2013, 05:20 PM | #3286 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I changed the oil, And flushed the break fluid.
__________________________________________________
Top speed 123.369mph. Ohio mile Worlds fastest 250 ninja |
|
March 9th, 2013, 06:06 PM | #3287 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Rode the piss out of her chasing down liter bikes and loving my new Corbin seat. Going to do the same tomorrow
Gota love this weather. |
|
March 9th, 2013, 06:38 PM | #3288 |
ninjette.org member
Name: Rom
Location: SoCal
Join Date: Oct 2012 Motorcycle(s): 2009 SE Ninja 250r Posts: 14
|
Had an oil leak on my right fork seal for several months. Was going to take it to a dealer for repair but didn't have the funds. Found Seal Doctor by Risk Racing. I was sceptical but thought I'd give it a try, it was cheap. Followed instructions, the first try removed dirt and gunk from the seal. After a second try and several pumps (maybe 20 pumps) on the fork, I was amazed! Worked as advertised.... no more leaks!! Never seen the dust cover and fork so dry without any oil after riding on bumps all day. Best investment so far.
http://www.powersportsplace.com/part...Fe4-MgoduVUAsg |
|
March 9th, 2013, 08:53 PM | #3289 |
ninjette.org member
Name: Raygan
Location: North East Texas
Join Date: Oct 2012 Motorcycle(s): White 2013 Ninja 300(Storm), Silver 2003 Fjr1300 Posts: 173
|
Adjusted my rearset adapters all the way back and up.
[IMG][/IMG]
__________________________________________________
ATGATT For all I know, women who ride motorcycles are all man-hating dominatrix's. It was like a mild panic attack! |
|
March 9th, 2013, 09:03 PM | #3290 |
Certified Troublemaker
Name: Teri
Location: Hamilton, NJ
Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot.
MOTM - Aug '13, Aug '14, Feb '17
|
Took a nice long solo ride. Beautiful day.
|
|
March 10th, 2013, 01:51 PM | #3291 | |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
Quote:
I washed, rubbed, polished, and waxed the bike today. Will go get some gas later too Weather is absolutely gorgeous. Was supposed to meet up in Dublin/Livermore with some friends, but it's looking like they are flaking.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
|
March 10th, 2013, 03:24 PM | #3292 |
Riding Ruby..
Name: Stephen
Location: SoCal
Join Date: Sep 2012 Motorcycle(s): 2014 Yamaha Bolt R-Spec, 2007 Ninja 250R Posts: 392
|
Rode it to work and back..a week without riding is waaay too long
__________________________________________________
Unregistered |
|
March 10th, 2013, 03:37 PM | #3293 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
Finally hacked my rear fender, put gasket between clutch to eliminate rattle. Adjusted my rear sets to try and help with shifter issue since installation of WC rearsets. So my shifter is still to high, but i can't move it lower without it making contact with part of the stand. particularly where the spring attaches, but this is a discussion for tech talk.
|
|
March 10th, 2013, 04:33 PM | #3294 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I forgot to order the engine case gaskets
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
March 10th, 2013, 05:14 PM | #3295 |
ninjette.org member
Name: Raygan
Location: North East Texas
Join Date: Oct 2012 Motorcycle(s): White 2013 Ninja 300(Storm), Silver 2003 Fjr1300 Posts: 173
|
Rode her to church and on the way home saw a horse with a saddle but no rider run through an intersection about 100 yards in front of me.
__________________________________________________
ATGATT For all I know, women who ride motorcycles are all man-hating dominatrix's. It was like a mild panic attack! |
|
March 10th, 2013, 05:49 PM | #3296 |
ninjette.org certified postwhore
Name: Rebecca
Location: SF Bay Area
Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot.
MOTM - Jan '18, Sep '13
|
Finally got front and rear stands so my bike is now on a rear stand. No room in that corner of the garage for the front stand too if the garage door is going to be closed though unfortunately.
|
|
March 10th, 2013, 05:57 PM | #3297 |
Fighting Texas Aggie '05
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.
|
nothing unfortunately. it was nice out and wanted to ride but my run took longer than expected. can't wait for weather to stop sucking so much in this state
|
|
March 10th, 2013, 06:12 PM | #3298 |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
Let them run. You can't hear the 09 running. She's stock
http://www.youtube.com/watch?v=NiV-n...e_gdata_player Not sure if I have to actually drive these but any rapid blip of the throttle it bogs and dies It's way more noticeable on the 100% stock 09
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
March 11th, 2013, 03:23 PM | #3299 | |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Quote:
|
|
|
March 11th, 2013, 07:53 PM | #3301 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
I'm in the process of a remedy, spent some time fiddling today. Round one goes to the shifter and kickstand but tomorrow is another day.
|
|
March 11th, 2013, 08:13 PM | #3302 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
Adjusted chain slack.
Was thinking about throwing on a 44 sprocket, but decided to ride instead.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
March 12th, 2013, 04:16 AM | #3303 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Tried to remove the clutch lever, rear brake, and shift lever. None of them would come off because I couldn't. get them loose... help...
__________________________________________________
|
|
March 12th, 2013, 05:13 AM | #3304 |
Venom Sponsored
Name: Jon
Location: Waco, TX
Join Date: Nov 2012 Motorcycle(s): 08 Ninja 250R x2 (his & hers), 05 Honda CRF250R Posts: 223
|
Flat spotted a fairly new Sport Demon tire trying to avoid t-boning a bimbo in an older Dodge Durango. I was only maybe a foot away from joing that club for the elite...
__________________________________________________
Venom RC | Atomik RC | FTW RC | Caster Racing USA | Avid Bearings |
|
March 12th, 2013, 05:14 AM | #3305 | |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Quote:
Most of the time it's just a patients game but at times on the dirt bike(more prone to rusting) I've used a screwdriver to lightly pry on the spline side while the wiggle the opposing toe grab side. Good luck |
|
|
March 12th, 2013, 06:36 AM | #3306 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
|
|
March 12th, 2013, 08:18 PM | #3307 | |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
Quote:
Today i filed and ground the crap out of my WC shift lever in an attempt to make it clear the various parts of the side stand and connector....Round 2 goes to me. It works and my shifter can not be place in a reasonable position. Now I just need to prime and re-paint the lever. |
|
|
March 13th, 2013, 07:10 AM | #3308 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
I know how to remove the clutch, I just don't have a socket or whatever it's called small enough to fit. And where am I spraying the WD40?
__________________________________________________
|
|
March 13th, 2013, 07:13 AM | #3309 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
I don't have girly hands, just biceps.
__________________________________________________
|
|
March 13th, 2013, 07:21 AM | #3310 | |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Quote:
Socket small enough? Just grab a adjustable crescent wrench for the bottom. |
|
|
March 13th, 2013, 07:32 AM | #3311 |
ninjette.org guru
Name: Bob
Location: Chicago
Join Date: Sep 2012 Motorcycle(s): '06 Ninja 250, 2018 Honda GL1800B Posts: 315
|
Chain and sprockets. Trying a 15T front.
|
|
March 13th, 2013, 08:09 AM | #3312 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Nooo Haha I got that part off easily, I can't get the bolt off that holds it on the rear set.
__________________________________________________
|
|
March 13th, 2013, 08:13 AM | #3313 |
ninjette.org certified postwhore
Name: Jason
Location: Norfolk, VA
Join Date: Dec 2011 Motorcycle(s): 2012 EX250, 2014 EX300 Posts: A lot.
|
i like the 15T front, 1st gear is more useable and my down shift blips seem to match better.
__________________________________________________
Ethioknight Memorial Fund- Sticker sale http://www.ninjette.org/forums/showthread.php?t=111700 |
|
March 13th, 2013, 08:53 AM | #3314 |
ninjette.org sage
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661
|
Took the bike for a 180 mile ride this past Monday. Unfortunately the trip was on flat straight roads leading to rear tire starting to square off.
|
|
March 13th, 2013, 08:56 AM | #3315 |
Biker
Name: Steve
Location: Brooklyn, NY
Join Date: Nov 2011 Motorcycle(s): 2010 Ninja 250 SE Posts: 723
|
Same here. I will hopefully be installing Chain and Sprockets this weekend.
Along with handlebar and turn signal... |
|
March 13th, 2013, 10:45 AM | #3316 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
|
|
March 13th, 2013, 11:40 AM | #3317 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
March 13th, 2013, 07:41 PM | #3318 | |
ninjette.org sage
Name: Bob
Location: NY
Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730
|
Quote:
And my battery tenders Hopefully these bikes will wake up in time for the next nice day
__________________________________________________
2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder- |
|
|
March 13th, 2013, 08:02 PM | #3319 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
getting it prepped for my long commute up hwy 1 on Friday. Boy I sure hate riding to work........ NOT.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
March 13th, 2013, 08:13 PM | #3320 |
ninjette.org member
Name: Percy
Location: NYC
Join Date: Mar 2013 Motorcycle(s): 2008 Yamaha FZ6 Posts: 28
|
Just installed woodcraft clip on, ssr preload adjusters, VERY NICE
__________________________________________________
Link us man, Just link us |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Discovered something scary about my Ninjette today... | kjohng | General Motorcycling Discussion | 28 | October 15th, 2021 01:40 PM |
Sold the 2006 Ninjette today :( | Renner | General Motorcycling Discussion | 31 | October 16th, 2014 11:46 PM |
Today I Gave My Ninjette Wings! | BlueHairSar | Pictures | 5 | June 20th, 2013 07:38 AM |
my bro went down today on his ninjette | richierich781 | !%@*#$%!)@#&!%@ I crashed! | 46 | January 18th, 2013 11:59 AM |
Ninjette. org hacked today | CC Cowboy | Off-Topic | 9 | April 3rd, 2011 08:55 AM |
|
|