Group Buy: Bohemian Racing Adjustable Rearsets - Page 9

Trailerboy531 · August 23rd, 2011, 05:41 PM

wow those look GOOOOOOOD. Kinda wish I got black and red but knowing I would have been off the bike for a month or so...couldn't wait.

still congrats guys those all look really good.

TheMojoRider · August 23rd, 2011, 06:55 PM

Thanks again Shaol1n Monk and Dennis. My set in black is on its way

DarC · August 23rd, 2011, 08:34 PM

Thought I would share this bit of important information: The last set has left the nest headed for the desert.

Shaol1n Monk · August 23rd, 2011, 09:34 PM

awesome! glad i could help everyone get a big discount on these and glad everyone is happy!

the green and black DO look sweet. i was debating going that route but went all green instead. i figured there was enuff black in that area already so the green will really stand out. guess i'll see inna couple days!

Felipe the Ant · August 23rd, 2011, 11:13 PM

Oh man I can't wait to get these

Shaol1n Monk · August 24th, 2011, 09:25 AM

just checked my tracking info and expected delivery date is TOMORROW!!!!
im not gonna lie... i got half a boner right now LOL

eds2fitty · August 24th, 2011, 11:58 AM

quick question for those that have installed theirs already... did you guys loctite the foot pegs or just the plastic toe piece?

Trailerboy531 · August 24th, 2011, 01:58 PM

Quote:

Originally Posted by eds2fitty

quick question for those that have installed theirs already... did you guys loctite the foot pegs or just the plastic toe piece?

I did both, if you read back a page or two you'll see where I said my plastic toe piece came off; but once i got that back on and got home my footpeg itself was barely hanging on. The bolt had almost completely come out (probably had less than 5 minutes left before it would have fallen off too)

LOCTITE EVERYWHERE

DarC · August 24th, 2011, 04:32 PM

Quote:

Originally Posted by Shaol1n Monk

just checked my tracking info and expected delivery date is TOMORROW!!!!
im not gonna lie... i got half a boner right now LOL

x2, except I'm full on rage. Also got my Zero Gravity clear touring in...good week for DarC!

Kevin2109 · August 24th, 2011, 04:32 PM

Quote:

Originally Posted by Trailerboy531

I did both, if you read back a page or two you'll see where I said my plastic toe piece came off; but once i got that back on and got home my footpeg itself was barely hanging on. The bolt had almost completely come out (probably had less than 5 minutes left before it would have fallen off too)

LOCTITE EVERYWHERE

I didnt do any loctite

Kevin2109 · August 24th, 2011, 04:34 PM

Here are them in action

Link to original page on YouTube.

I drug knee at 4:27 and 4:51 First time ever

eds2fitty · August 24th, 2011, 05:14 PM

Quick question: for the brake side, do we reuse the spring from the stock set and what do we do with the spring for the brake light?

adri99an · August 24th, 2011, 06:13 PM

Quote:

Originally Posted by Kevin2109

Here are them in action

Link to original page on YouTube.

I drug knee at 4:27 and 4:51 First time ever

Who's the guy waaaay in front?

Cazper · August 24th, 2011, 09:38 PM

Bro... you really need to get at least the balls of your feet up on your pegs... I actually ride with almost my toes on the pegs... I can only imagine whats gonna happen when you hit your toe the wrong way and it drags it under the bike... no bueno

Trailerboy531 · August 24th, 2011, 09:51 PM

Quote:

Originally Posted by Kevin2109

I didnt do any loctite

That may fine but it also may totally bite you in the ass. Some blue loctite couldn't hurt, right?

Trailerboy531 · August 24th, 2011, 09:55 PM

Quote:

Originally Posted by eds2fitty

Quick question: for the brake side, do we reuse the spring from the stock set and what do we do with the spring for the brake light?

I didn't use any of the springs. Of course, that also means when I use my rear brake only my brake light isn't triggered at all. You hand up taging off the two bolts and uh.......U shaped thing at the end of the master cylinder and winding the footpeg directly on to that so no springs are necessary. Unless of course I was totally winging it and failed and simply haven't crashed yet..

TheMojoRider · August 24th, 2011, 10:53 PM

Quote:

Originally Posted by Kevin2109

I didnt do any loctite

Loctite before you crash

adri99an · August 25th, 2011, 06:18 AM

Quote:

Originally Posted by Cazper

Bro... you really need to get at least the balls of your feet up on your pegs... I actually ride with almost my toes on the pegs... I can only imagine whats gonna happen when you hit your toe the wrong way and it drags it under the bike... no bueno

I was thinking the same thing but there's never been a time I've ridden and my front toe hit the ground???
Posted via Mobile Device

Kevin2109 · August 25th, 2011, 08:39 AM

That is the balls of my feet lol

and yeah im with adrian, not sure its even possible to hit the front of my foot

DarC · August 25th, 2011, 10:17 AM

It's the perspctive of the video. I HAVE hit the toe of my left foot going through a turn but I up still up on the bike (not leaned off as I should have been) and I had the bike wayyy to far over as well as I had my foot on the shifter about to upshift. As you can see many variables were on the danger side and that's when it happened.

All good though, I knew what was going on, knew what I was doing, and expected some rub and didn't ZOMGWTF when I touched down. Experience isn't an excuse but it keeps the shiny side up

Shaol1n Monk · August 25th, 2011, 10:22 AM

mailman came and no rearsets today. usps tracking has today as the expected delivery so tomorrow must be the day.
Yay! just in time for the hurricane

DarC · August 25th, 2011, 10:51 AM

Our mail comes later in the day...Maybe I will get lucky??

My tracker says the 25th also but there isn't anything past this:

Detailed Results:

* Processed through Sort Facility, August 23, 2011, 11:34 pm, OAKLAND, CA 94615
* Electronic Shipping Info Received, August 24, 2011
* Acceptance, August 23, 2011, 4:20 pm, OAKLAND, CA 94605

Hope it gets here! I have the day off and work all weekend!

TheMojoRider · August 25th, 2011, 11:07 AM

Received mine today.
Is there a reason why the heal guard on the shift side is bent in towards the swingarm? The brake side is completely flat and my experience will other brands are that both sides are completely flat.

Idea?

DarC · August 25th, 2011, 11:10 AM

I have noticed that in the pictures...maybe it's for ++ style points? Curious as well.

Kevin2109 · August 25th, 2011, 11:12 AM

Quote:

Originally Posted by TheMojoRider

Received mine today.
Is there a reason why the heal guard on the shift side is bent in towards the swingarm? The brake side is completely flat and my experience will other brands are that both sides are completely flat.

Idea?

Totally normal with these ones

Quote:

Originally Posted by DarC

I have noticed that in the pictures...maybe it's for ++ style points? Curious as well.

It seems to interfere less with my boot. And I think its just looks too lol

eds2fitty · August 25th, 2011, 12:27 PM

Quote:

Originally Posted by gt_turbo

just finished installing a brake pressure sensor for the rear brake. super easy to install. you can get it here. double check the thread dimensions before buying. as i just purchased mine from Nemsis on the forum.

Sorry for a newbie question but how do we measure or find out what the thread dimension is? This sensor lights up the brake light right?

DarC · August 25th, 2011, 01:53 PM

Quote:

Originally Posted by Kevin2109

It seems to interfere less with my boot. And I think its just looks too lol

Word, I have a big pad/thingy/protective region on the inside of my boot that would probably enjoy the clearance you mention.

Ergonomic rear sets? Sayitaintso!

Felipe the Ant · August 25th, 2011, 02:24 PM

Trailerboy531 · August 25th, 2011, 02:35 PM

Man look at those things! beautiful!

SES2009 · August 25th, 2011, 02:37 PM

Really sexy!!!

Felipe the Ant · August 25th, 2011, 02:41 PM

I'm gonna get some loctite tomorrow and then I'll put them on and get a better picture

DarC · August 25th, 2011, 04:28 PM

Got em...must say the silver looks.....SICK!!

Shaol1n Monk · August 25th, 2011, 05:25 PM

Quote:

Originally Posted by Felipe the Ant

I'm gonna get some loctite tomorrow and then I'll put them on and get a better picture

that black and green looks fan-freakin-tastic!

Quote:

Originally Posted by DarC

Got em...must say the silver looks.....SICK!!

pics pics pics!

mine should be here tomorrow (crossing fingers) then u can all bow before green lanterns light!

gt_turbo · August 25th, 2011, 06:31 PM

Quote:

Originally Posted by eds2fitty

Sorry for a newbie question but how do we measure or find out what the thread dimension is? This sensor lights up the brake light right?

either buy a one of those metric thread gauge tools where you can check the thread size. or you can take your brake bolt to a hardware store and find a metric nut that will fit it and write down the thread size.

TheMojoRider · August 25th, 2011, 07:05 PM

Quote:

Originally Posted by TheMojoRider

Received mine today.
Is there a reason why the heal guard on the shift side is bent in towards the swingarm? The brake side is completely flat and my experience will other brands are that both sides are completely flat.

I emailed Dennis and this is what he said,

Quote:

All ninja sets have it ... it is to prevent your pants getting hooked
on the edge of the heel guard

Apparently people think jeans are enough protection for canyon carving

Shaol1n Monk · August 25th, 2011, 07:49 PM

ok, so is there something up with hooking up the brake sensor w these sets??? will i be able to hook my brake light up with them as is or do i need something else??? i do alot of city riding so i need my brae lights working. i also need to take my test sept 6 so i need the back brake light to work for the pre test inspection too.

from those of u who installed already lemme know whats up please

DarC · August 25th, 2011, 08:55 PM

You might be able to "rig" something up but it would be difficult. The brake light pressure sensor mentioned earlier is the key to making the rear brake trigger the light.

I stop with both brakes at every stop so my front brake triggers the light anyways, I will take my time getting the sensor, but you should do it soon. (groupbuy?

)

Without further ado...I present a teaser pic:

Trailerboy531 · August 25th, 2011, 09:19 PM

Quote:

Originally Posted by DarC

Without further ado...I present a teaser pic:

Shaol1n Monk · August 25th, 2011, 10:15 PM

Quote:

Originally Posted by DarC

You might be able to "rig" something up but it would be difficult. The brake light pressure sensor mentioned earlier is the key to making the rear brake trigger the light.

I stop with both brakes at every stop so my front brake triggers the light anyways, I will take my time getting the sensor, but you should do it soon. (groupbuy?

)

Without further ado...I present a teaser pic:

so whats up w the sensor thats on there now? it doesnt work w the rearsets?
anyone wanna do a video DIY for these? pref someone who knows about the brake light sensor.

also DarC where'd u get those big zx-2r stickers for the side of ur bike? i like em!

o and the rearsets look good! even upsidedown LOL

Trailerboy531 · August 25th, 2011, 10:18 PM

I don't know about gt_turbo's set up. Right now my rear brake isn't hooked up to the sensor at all.

August 23rd, 2011, 08:34 PM	#323
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	Thought I would share this bit of important information: The last set has left the nest headed for the desert. __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 23rd, 2011, 09:34 PM	#324
Shaol1n Monk shaol1n ninja stuntman Name: Jae Location: Philly Join Date: May 2011 Motorcycle(s): 2006 Yamaha YZF R6 Anniversary "Yoshiko" 2007 Honda CBR600RR "Katsumi"(SOLD) 2010 Ninja ZX-2R "JADE" (RIP) Posts: 726	awesome! glad i could help everyone get a big discount on these and glad everyone is happy! the green and black DO look sweet. i was debating going that route but went all green instead. i figured there was enuff black in that area already so the green will really stand out. guess i'll see inna couple days! __________________________________________________ YOSHIKO 06 R6 Flushmount signals,Comp Werkes fender elim,GYTR Carbon Fiber Exhaust,Gold Shorty Levers,Shogun Frame Sliders,custom carbon fiber tank pad,white powder coated wheels,Dunlop Q2 tires

August 24th, 2011, 09:25 AM	#326
Shaol1n Monk shaol1n ninja stuntman Name: Jae Location: Philly Join Date: May 2011 Motorcycle(s): 2006 Yamaha YZF R6 Anniversary "Yoshiko" 2007 Honda CBR600RR "Katsumi"(SOLD) 2010 Ninja ZX-2R "JADE" (RIP) Posts: 726	just checked my tracking info and expected delivery date is TOMORROW!!!! im not gonna lie... i got half a boner right now LOL __________________________________________________ YOSHIKO 06 R6 Flushmount signals,Comp Werkes fender elim,GYTR Carbon Fiber Exhaust,Gold Shorty Levers,Shogun Frame Sliders,custom carbon fiber tank pad,white powder coated wheels,Dunlop Q2 tires

August 24th, 2011, 04:34 PM	#331
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Here are them in action Link to original page on YouTube. I drug knee at 4:27 and 4:51 First time ever __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 24th, 2011, 09:38 PM	#334
Cazper ninjaholic Name: Dustin Location: Oceanside, CA Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot. Blog Entries: 3	Bro... you really need to get at least the balls of your feet up on your pegs... I actually ride with almost my toes on the pegs... I can only imagine whats gonna happen when you hit your toe the wrong way and it drags it under the bike... no bueno __________________________________________________ 09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List"

August 23rd, 2011, 05:41 PM	#321
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	wow those look GOOOOOOOD. Kinda wish I got black and red but knowing I would have been off the bike for a month or so...couldn't wait. still congrats guys those all look really good.

August 23rd, 2011, 06:55 PM	#322
TheMojoRider ninjette.org member Name: Ninja Location: CA Join Date: Aug 2011 Motorcycle(s): Ninja! Posts: 77	Thanks again Shaol1n Monk and Dennis. My set in black is on its way

August 23rd, 2011, 11:13 PM	#325
Felipe the Ant ninjette.org sage Name: . Location: . Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R SE GREEN! Posts: 562	Oh man I can't wait to get these

August 24th, 2011, 11:58 AM	#327
eds2fitty ninjette.org member Name: Ed Location: Bay Area Cali Join Date: Jul 2011 Motorcycle(s): 2011 250R SE Posts: 63	quick question for those that have installed theirs already... did you guys loctite the foot pegs or just the plastic toe piece?

August 24th, 2011, 05:14 PM	#332
eds2fitty ninjette.org member Name: Ed Location: Bay Area Cali Join Date: Jul 2011 Motorcycle(s): 2011 250R SE Posts: 63	Quick question: for the brake side, do we reuse the spring from the stock set and what do we do with the spring for the brake light?

August 25th, 2011, 08:39 AM	#339
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	That is the balls of my feet lol and yeah im with adrian, not sure its even possible to hit the front of my foot __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 25th, 2011, 10:17 AM	#340
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	It's the perspctive of the video. I HAVE hit the toe of my left foot going through a turn but I up still up on the bike (not leaned off as I should have been) and I had the bike wayyy to far over as well as I had my foot on the shifter about to upshift. As you can see many variables were on the danger side and that's when it happened. All good though, I knew what was going on, knew what I was doing, and expected some rub and didn't ZOMGWTF when I touched down. Experience isn't an excuse but it keeps the shiny side up __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 25th, 2011, 10:22 AM	#341
Shaol1n Monk shaol1n ninja stuntman Name: Jae Location: Philly Join Date: May 2011 Motorcycle(s): 2006 Yamaha YZF R6 Anniversary "Yoshiko" 2007 Honda CBR600RR "Katsumi"(SOLD) 2010 Ninja ZX-2R "JADE" (RIP) Posts: 726	mailman came and no rearsets today. usps tracking has today as the expected delivery so tomorrow must be the day. Yay! just in time for the hurricane __________________________________________________ YOSHIKO 06 R6 Flushmount signals,Comp Werkes fender elim,GYTR Carbon Fiber Exhaust,Gold Shorty Levers,Shogun Frame Sliders,custom carbon fiber tank pad,white powder coated wheels,Dunlop Q2 tires

August 25th, 2011, 10:51 AM	#342
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	Our mail comes later in the day...Maybe I will get lucky?? My tracker says the 25th also but there isn't anything past this: Detailed Results: * Processed through Sort Facility, August 23, 2011, 11:34 pm, OAKLAND, CA 94615 * Electronic Shipping Info Received, August 24, 2011 * Acceptance, August 23, 2011, 4:20 pm, OAKLAND, CA 94605 Hope it gets here! I have the day off and work all weekend! __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 25th, 2011, 11:07 AM	#343
TheMojoRider ninjette.org member Name: Ninja Location: CA Join Date: Aug 2011 Motorcycle(s): Ninja! Posts: 77	Received mine today. Is there a reason why the heal guard on the shift side is bent in towards the swingarm? The brake side is completely flat and my experience will other brands are that both sides are completely flat. Idea?

August 25th, 2011, 11:10 AM	#344
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	I have noticed that in the pictures...maybe it's for ++ style points? Curious as well. __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 25th, 2011, 02:24 PM	#348
Felipe the Ant ninjette.org sage Name: . Location: . Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R SE GREEN! Posts: 562

August 25th, 2011, 02:35 PM	#349
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Man look at those things! beautiful!

August 25th, 2011, 02:37 PM	#350
SES2009 ninjette.org member Name: Sean Location: Las Vegas Join Date: May 2011 Motorcycle(s): 2009 Ninja 250R Posts: 133	Really sexy!!!

August 25th, 2011, 02:41 PM	#351
Felipe the Ant ninjette.org sage Name: . Location: . Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R SE GREEN! Posts: 562	I'm gonna get some loctite tomorrow and then I'll put them on and get a better picture

August 25th, 2011, 04:28 PM	#352
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	Got em...must say the silver looks.....SICK!! __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 25th, 2011, 07:49 PM	#356
Shaol1n Monk shaol1n ninja stuntman Name: Jae Location: Philly Join Date: May 2011 Motorcycle(s): 2006 Yamaha YZF R6 Anniversary "Yoshiko" 2007 Honda CBR600RR "Katsumi"(SOLD) 2010 Ninja ZX-2R "JADE" (RIP) Posts: 726	ok, so is there something up with hooking up the brake sensor w these sets??? will i be able to hook my brake light up with them as is or do i need something else??? i do alot of city riding so i need my brae lights working. i also need to take my test sept 6 so i need the back brake light to work for the pre test inspection too. from those of u who installed already lemme know whats up please __________________________________________________ YOSHIKO 06 R6 Flushmount signals,Comp Werkes fender elim,GYTR Carbon Fiber Exhaust,Gold Shorty Levers,Shogun Frame Sliders,custom carbon fiber tank pad,white powder coated wheels,Dunlop Q2 tires

August 25th, 2011, 10:18 PM	#360
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	I don't know about gt_turbo's set up. Right now my rear brake isn't hooked up to the sensor at all.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for Sena group buy	fixxervi6	Items Wanted	0	September 11th, 2012 07:19 PM
Bohemian Racing Rearsets	kingkang204	Motorcycle-related	15	September 4th, 2012 06:50 PM
Bohemian Racing Green/Black rearsets	NikkitaNinja	Motorcycle-related	11	August 10th, 2012 11:54 AM
2008 250r bohemian racing rearset shift peg	cynicalkit	Items Wanted	1	August 8th, 2012 10:02 AM
Group Buy: Driven Clip Ons!! From Bohemian Racing	Kevin2109	Motorcycle-related	79	December 9th, 2011 12:36 PM