January 28th, 2009, 01:45 AM | #1 |
FORMER MOTORCYCLE RIDER
Name: Steve
Location: On a Trek SU200 or in my CRX
Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758
|
Titanium Area P Exhaust
Well i hate Carbon Fiber and i'm no fan of Stainless either so.......Kerry over at Area P hooked me up with a Titanium can. I asked him if he could do it because i saw the Concourse was available with it. He said it would be done in the R&D Dept. So the same day i ordered it he shipped it out.
They are some great people the deal with. I will recommend them to everyone!!! Now i just need some warm weather so i can put it on So here is my 15" Titanium Area P with quiet core internals |
|
January 28th, 2009, 02:32 AM | #2 |
ninjette.org sage
Name: David
Location: Wellington, New Zealand
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R in Green! (Sold) Now 2011 Triumph Daytona 675 SE Posts: 564
|
Very nice looking, be sure to post pics of the bike once installed
I must agree that they are a great company to buy from, I have been emailing Kerry and have talked to Jenny on the phone, they are both great! |
|
January 28th, 2009, 06:40 AM | #3 |
ninjette.org guru
Name: Tom
Location: Dayton, OH
Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467
|
Looks good!
Did they happen to say anything about weight savings?
__________________________________________________
CHEERS!!! |
|
January 28th, 2009, 07:15 AM | #4 | |
FORMER MOTORCYCLE RIDER
Name: Steve
Location: On a Trek SU200 or in my CRX
Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758
|
Quote:
kkim said in his DYI " 5 1/5 lbs." with his 18" stainless can. Mine should be some where in between. FedEx had my package at 10 1/2 lbs. shipping. Area P packs with ALOT of popcorn and foam wrap. Last futzed with by CRXTrek; January 28th, 2009 at 08:00 AM. Reason: add info |
|
|
January 28th, 2009, 05:34 PM | #5 |
ninjette.org guru
Name: Tom
Location: Dayton, OH
Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467
|
Is that real carbon fiber?
__________________________________________________
CHEERS!!! |
|
January 28th, 2009, 06:23 PM | #6 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
January 28th, 2009, 07:48 PM | #7 |
ninjette.org member
Name: Tim
Location: O*C California
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 2505 Posts: 98
|
what is the i.d on the exhuast at the end of the can?
|
|
January 28th, 2009, 09:08 PM | #8 |
FORMER MOTORCYCLE RIDER
Name: Steve
Location: On a Trek SU200 or in my CRX
Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758
|
1 3/4" Inlet End
Last futzed with by CRXTrek; January 28th, 2009 at 09:10 PM. Reason: add |
|
January 29th, 2009, 10:07 AM | #9 |
ninjette.org guru
Name: Tom
Location: Dayton, OH
Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467
|
^^Thanks kbryant^^
I am extremely happy with your standard SS full system
__________________________________________________
CHEERS!!! |
|
January 31st, 2009, 10:03 AM | #10 |
ninjette.org certified postwhore
Name: Kim
Location: mundo de ensueño
Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.
|
Very nice! I can't wait until I can afford my Area-P exhaust!
|
|
January 31st, 2009, 03:17 PM | #11 |
FORMER MOTORCYCLE RIDER
Name: Steve
Location: On a Trek SU200 or in my CRX
Join Date: Dec 2008 Motorcycle(s): Rode an 08 250r then rode an 08 ZX-6R until i totaled it on 7/10/10 Posts: 758
|
Titanium Area P installed
Except for rotten wellnuts everything went smooth .
It sounds great . A little louder than my modded stock muffler and much quieter than that HR-1 i wasted $$$ on ! ! ! Last futzed with by CRXTrek; January 31st, 2009 at 03:22 PM. Reason: fix HUGE pics |
|
February 2nd, 2009, 04:08 PM | #12 |
lolwut
Name: Alex
Location: socal
Join Date: Dec 2008 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 196
|
Looks nice!!!
What didnt you like about the HR-1?
__________________________________________________
08 Blue Ninja 250R |
|
February 2nd, 2009, 08:34 PM | #13 |
Akai Suisei - 赤い彗星
Name: Joseph
Location: socal
Join Date: Nov 2008 Motorcycle(s): 08 Kurosaki 250, 09 Honda 600RawrRawr Posts: 540
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Area-P solo exhaust bracket for Ninja 300 w/stock exhaust | c-dog | Motorcycle-related | 2 | September 12th, 2014 10:48 AM |
R-9 Titanium exhaust. | rersme | 2008 - 2012 Ninja 250R Farkles | 9 | February 8th, 2013 01:49 PM |
Two brothers Titanium exhaust | jack_bm | 2008 - 2012 Ninja 250R Farkles | 11 | May 7th, 2012 12:39 PM |
Akrapovic Exhaust: Titanium or Carbon | Den | 2008 - 2012 Ninja 250R Farkles | 40 | September 23rd, 2010 04:13 PM |
WTB: Area P full exhaust (or exchange 08+ stock exhaust) | mikecronis | Items Wanted | 0 | June 16th, 2010 05:54 AM |
|
|