ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Reply
 
Thread Tools
Old May 28th, 2009, 04:39 AM   #1
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
knocking or rattling noise

I took the bike out for my first ride yesterday and hear this knocking or rattling noise from the left side of the bike. I believe i heard the noise after 3500-4000 rpm. I am not sure on this cuz I wanted to pay attention to the road instead of the rpm. Is this normal?
tinng321 is offline   Reply With Quote




Old May 28th, 2009, 05:12 AM   #2
M-Oorb
ninjette.org sage
 
M-Oorb's Avatar
 
Name: Matt
Location: South East Florida/Rutgers University
Join Date: Dec 2008

Motorcycle(s): 2008 250r (Fastest Color)

Posts: 914
Hm any rattling noise isn't normal. Where on the left side is it coming from ie from the engine area or down by the shift linkage... Does it sound mechnical or like a loose bolt?
Posted via Mobile Device
M-Oorb is offline   Reply With Quote


Old May 28th, 2009, 05:29 AM   #3
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
Quote:
Originally Posted by M-Oorb View Post
Hm any rattling noise isn't normal. Where on the left side is it coming from ie from the engine area or down by the shift linkage... Does it sound mechnical or like a loose bolt?
Posted via Mobile Device
I think it's coming from the engine. Sound more mechnical than loose bolt.
tinng321 is offline   Reply With Quote


Old May 28th, 2009, 06:47 AM   #4
Cali619
Giggity Giggity
 
Cali619's Avatar
 
Name: Ryam
Location: San Diego
Join Date: Feb 2009

Motorcycle(s): 08 ninja 250R aka Hiryu

Posts: 481
have you had a chance to rev it in neutral on its kickstand to try and pinpoint the source?
__________________________________________________
Facebook DY Fender chop, Danmoto CB slip-on w/baffle, Airbox removed, Kleen-air removed, shimmed needles, Mikuni #117.5 Main jets, K&N RU-1822 air filter pods
Cali619 is offline   Reply With Quote


Old May 28th, 2009, 08:01 AM   #5
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
Quote:
Originally Posted by Cali619 View Post
have you had a chance to rev it in neutral on its kickstand to try and pinpoint the source?
I'll try that when i get home from work.
tinng321 is offline   Reply With Quote


Old May 28th, 2009, 11:48 AM   #6
OldGuy
Live Life
 
OldGuy's Avatar
 
Name: Don
Location: Lincoln, NE
Join Date: Nov 2008

Motorcycle(s): 2009 Green SE Ninja 250

Posts: A lot.
Quote:
Originally Posted by tinng321 View Post
I'll try that when i get home from work.
Before you get too carried away check the oil level just to be sure. On the '08 forward with only the side stand you need to slide a 2x4 under the stand (wide part up) to get the bike more level for checking the level.
__________________________________________________
- ATGATT -
Scorpion EX700 Hi-Vis Helmet, First Gear MeshTek 3.0 Jacket, TourMaster Transition 2 Jacket and Flex Pants, Sidi Doha boots
OldGuy is offline   Reply With Quote


Old May 28th, 2009, 03:50 PM   #7
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
Quote:
Originally Posted by OldGuy View Post
Before you get too carried away check the oil level just to be sure. On the '08 forward with only the side stand you need to slide a 2x4 under the stand (wide part up) to get the bike more level for checking the level.
Hmmmm... I think I know where the noise is coming from. It looks like the shift linkage is loose. I just tighting it up. Can't test ride cuz it's raining.
I'll check the oil tomorrow b4 I take it out for a test ride.
It seems like everyone is having this same problem. Do bikes have recalls like autos?

Thanks all.
tinng321 is offline   Reply With Quote


Old May 28th, 2009, 04:03 PM   #8
Banzai
Psychic war veteran
 
Banzai's Avatar
 
Name: Thomas
Location: Norfolk, VA
Join Date: May 2009

Motorcycle(s): Kawi Green '09 Ninja ZX6R

Posts: 663
Quote:
Originally Posted by tinng321 View Post
Hmmmm... I think I know where the noise is coming from. It looks like the shift linkage is loose. I just tighting it up. Can't test ride cuz it's raining.
I'll check the oil tomorrow b4 I take it out for a test ride.
It seems like everyone is having this same problem. Do bikes have recalls like autos?

Thanks all.
Careful, spec on that shift linkage bolt that attaches to the transmission is 104 in/lbs, which is not quite as tight as you think it is. Use blue locktite. If it was the bolt that mounts the shift lever pedal to the frame, that's only 18 ft/lbs, and also should have blue locktite on it. I hope that helps cure your rattling. Stay safe.

And the answer is YES, bikes DO have recalls. Ducati recalled their new StreetFighter the day it debuted for a possible cracking fuel hose fitting that could cause fires.

Most of the problems with these bikes related to hardware should have been caught during set up from the dealer and never happened, again at the 600 mile first service, and then nothing should go wrong fastener wise from there. Other than routine service, T-CLOCS is your friend. (Tires and wheels, Controls, Lights and electrics, Oil and other fluids, Chasis, Stands)
__________________________________________________
* If you're arguing with some idiot over the internet, chances are pretty good he's doing the same thing!
Zodiac Mindwarp and the Love Reaction
Banzai is offline   Reply With Quote


Old May 28th, 2009, 08:09 PM   #9
kkim
 
Join Date: Nov 2008

Posts: Too much.
You mean things work loose on a high revving, vibration filled vehicle like a motorcycle? Who would have guessed it?
kkim is offline   Reply With Quote


Old May 30th, 2009, 07:58 PM   #10
backinthesaddleagain
ninjette.org certified postwhore
 
backinthesaddleagain's Avatar
 
Name: Greg
Location: Rhode Island
Join Date: Apr 2009

Motorcycle(s): 2013 ZX6R 636

Posts: A lot.
one of the new bmw's has 3 recalls between the time the dealer uncrates it and it goes out the door.
backinthesaddleagain is offline   Reply With Quote


Old May 31st, 2009, 05:05 AM   #11
ScorpionNinja
ninjette.org certified postwhore
 
ScorpionNinja's Avatar
 
Name: Dave
Location: Michigan
Join Date: May 2009

Motorcycle(s): 2009 Kawasaki Ninja 650RTE & 2009 Kawasaki Ninja 250R (SOLD)

Posts: A lot.
hmmm im not sure i know what your hearing, but on my 250R only noise thats weird ,etc was the dreaded FRONT WHEEL BEARING (squeeak, squeeak. . . .) but it was stopped , for now!

I do though, hear a noise which my guess is, its just a "Vibration noise" , of the front fairings or some part of the plastic Body panel. if i remb right, i here it as im slowing down for a red light,etc @ about 25-30 MPH! Its like a Vibration HUM if anything come to think about it! I dont feel its sumin Bad, or bugs me, so i just wondered if anyothers here, have Hear this Humming type vibration noise? Is that normal on a sportbike... any kind suzuki,honda,yamaha,kawi? cuz of the Plastic body panels... with high RPMs your bound too get sumin Vibrating like crazy and HUM*
ScorpionNinja is offline   Reply With Quote


Old May 31st, 2009, 05:13 AM   #12
tinng321
ninjette.org sage
 
tinng321's Avatar
 
Name: Tin
Location: NJ
Join Date: Apr 2009

Motorcycle(s): 08 black 250r (sold); '09 black zx6r

Posts: 903
it's really hard to tell where the sound is coming from on a bike cuz of the wind and road noise. I hear it louder when i pull in the clutch lever. maybe it's just a humming noise you're talking about. i have no idea. i only hear it when i ride.
tinng321 is offline   Reply With Quote


Old May 31st, 2009, 09:51 AM   #13
kkim
 
Join Date: Nov 2008

Posts: Too much.
thought the noise was the shifter?
kkim is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Rattling noise from the engine.. paterick4o8 2008 - 2012 Ninja 250R Tech Talk 15 February 9th, 2021 08:16 PM
2012 NINJA 250 Engine Knocking/rattling? drosvil 2008 - 2012 Ninja 250R Tech Talk 7 July 28th, 2014 12:13 PM
Rattling Noise hieuster 2008 - 2012 Ninja 250R Tech Talk 12 July 3rd, 2013 11:13 PM
Engine knocking noise vinnyirl 2008 - 2012 Ninja 250R Tech Talk 11 March 8th, 2013 12:33 PM
Weird knocking noise... blink 2008 - 2012 Ninja 250R Tech Talk 6 July 3rd, 2012 12:24 PM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 02:40 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.