April 4th, 2020, 08:47 PM | #1 |
ninjette.org newbie
Name: Ash
Location: Melbourne
Join Date: Mar 2020 Motorcycle(s): Ninja race bike,gsxr1000,gsxr750 Posts: 9
|
Ninja 300 13+ Headers on 250
Looking at these arrow headers. Would would be needed to make the 13model 300 headers fit my 12 model 250. I already have an arrow pipe on the standard headers.
|
|
April 5th, 2020, 01:36 AM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Sure it’ll fit.
|
|
April 11th, 2020, 05:55 AM | #3 |
ninjette.org newbie
Name: Sanosh
Location: Norway, Oslo
Join Date: May 2019 Motorcycle(s): Ninja 250R Posts: 8
|
Have you tried it yet? If no, post an update
|
|
April 12th, 2020, 05:28 AM | #4 |
ninjette.org newbie
Name: Ash
Location: Melbourne
Join Date: Mar 2020 Motorcycle(s): Ninja race bike,gsxr1000,gsxr750 Posts: 9
|
Ended up buying this full arrow system. Should be here Tuesday
|
|
April 12th, 2020, 07:36 AM | #5 |
ninjette.org newbie
Name: Sanosh
Location: Norway, Oslo
Join Date: May 2019 Motorcycle(s): Ninja 250R Posts: 8
|
|
|
April 12th, 2020, 04:20 PM | #6 |
ninjette.org newbie
Name: Ash
Location: Melbourne
Join Date: Mar 2020 Motorcycle(s): Ninja race bike,gsxr1000,gsxr750 Posts: 9
|
For the 250r
|
|
April 14th, 2020, 02:13 AM | #7 |
ninjette.org guru
Name: Chris
Location: Bristol, UK
Join Date: Feb 2016 Motorcycle(s): ZZR250, VFR800 Posts: 475
|
IIRC the 250 & 300 have different sized exhaust outlets, so I don’t think 300 headers will fit 250 head.
|
|
May 17th, 2020, 06:30 AM | #8 |
ninjette.org newbie
Name: Ash
Location: Melbourne
Join Date: Mar 2020 Motorcycle(s): Ninja race bike,gsxr1000,gsxr750 Posts: 9
|
Fitted the 300 headers today. They fit they head no problem. The only issue is with the oil strainer housing. One of the header pipes hits the housing. Easily solved by using the earlier pre 2008 cover which is a plate and not a bulky housing. All other mounting brackets line up spot on. So yes the later 300 system will fit if you change that housing
|
|
May 17th, 2020, 07:04 AM | #9 |
ninjette.org guru
Name: Chris
Location: Bristol, UK
Join Date: Feb 2016 Motorcycle(s): ZZR250, VFR800 Posts: 475
|
Good to know
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08+ Ninja 250 stock exhaust + headers | 1LoneWolf | Motorcycle-related | 7 | July 9th, 2012 07:12 AM |
Thread Tools | |
|
|