May 24th, 2016, 06:54 PM | #1 |
Urban Legend
Name: Baron
Location: Brampton, ON
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250R SE - Circe Posts: 542
|
Circe 2.0
Okay okay before you guys say - "well look who's coming crawling back". I have a perfectly valid reason for going AFK - University, girls, exams, girls, 2 jobs, girls...you get the general idea. So as much as I love Circe I wanted to give her a makeover and lately I have been getting into street fighters a lot. At first I though of getting that brasse kit but then again, why not go for something unique, something different, something personal.
Parts 1. GSXR rear shock - Already had it 2. Projector headlights - Ebay 3. Clips ons - Dime City Cycles 4. Trailtech vapor - Amazon 5. K&N pod filers 6. LED strips for turn signals 7. Jet Kit Step 1 - The striptease Well everything had to go, so everything had to come off. And since I am mechanically inept, I had a friend with me who thankfully is a master mechanic and has been working on bikes his whole life....more or less.... decided to do it for me. Soo off goes Circe's fairings, tank, headlights basically everything. Step 2 - The bouncy bouncy Off goes the stock shock and in goes the gsxr shock I had gotten about a year ago from a friend. The installation was a pain in the ass, had to take off the undertail, the rear tire, the airbox just to get to bloody shock. So off goes the stock one and on goes the new one. Time to put the airbox in......nope...obviously there had to be some sort of a problem....since the guy I took the shock from was taller than me, the dog bones weren't long enough meaning the damn thing was too high up to get the airbox in and I didn't have a lowering kit on me.......AKSDF;JADSFUOHASJBFVAUJFD So........ordered K&N pod filters....buuttttt that's a 2 day wait....fiiineeeeeeeeeeee..I have waited for so long so fineeeeeeeee but wait......now I have to modify the undertail a bit.....-_- *Bangs his head on the wall* Done Step 3 - The controlfreak Okay....shock done, tire's back on, carbs covered, filter ordered ...chain has some surface rust which will be cleaned and lubed later. What next....the clip ons... Went pretty straightforward till I realized that my bars were all bent to hell so out comes the saw and everything came off. The clips on from Dime City were a good deal and they seem really sturdy as well. The installation wasn't a problem.......till I realized that my levers were pretty much shot to **** as well soooooooooooordered a pair for myself. [/URL] Step 4 - The Tease Here's is where things start looking better. With the biggest two things done, it was time to start putting her back a bit, so up goes the tank.... All set and good, undertail back on, tires all set, chain rust free, cleaned and lubed, coolant I left for the last along with cleaning the pipes. Time to get her arse back into place( I know I know, get your minds out of the gutter ;P) All the cables neatly(as neat as I could have them) tucked inside. Also the pods came in!!!! RGB - Achievement Unlocked!! :P Nyhoo pods in, levers on, mirrors on. Time to cut the fairings. I had some idea what it was going to look like so I started cutting conservatively, not my best work but I left enough room to sand it smooth tomorrow so that's good. Got to paint the coolant reservoir as well . Nyhoo so time to get the headlights on. Stage 5 - So close Now the mount I got off ebay wasn't going to fit in just like that so like my friend said, time to play Legos. So I got myself these Solved the problem more or less, Since we had to mount the gauge as well we only attached the bottom end(quite firmly though). All connected, all good. LED indicators on the forks. (yes yes more photographs coming soon) Time to put on the gauge.......yeaaaahhhh no Unfortunately, while I could help my friend out while he worked on my bike, I have no idea what the bloody hell to do when it comes to the electrical stuff. He had some urgent and long family obligation so we wrapped things up. Now I got to figure out how to put on the gauge. Oh well..can't be helped, he did more than I asked him to do. Can't thank him enough. Nyhoo so I used my phone as a GPS speedometer and took her for a ride. Couple of things I noticed 1. Handled much better, turned in more sharply(got to get to know her all over again) 2. Love the new raw look, got a few compliments from other riders too but still a ways to go 3. Feels lighter and the rear shock feels so much better. So all good? NO, not with my luck. Things to do 1. Wire up the gauge 2. Make a makeshift mount while waiting for a friend to CNC a better one for you 3. Need to rejet the carbs. 4. Need to get LED relay for the idicators. At first I thought that her not feeling the same, acceleration and power wise , was because of the old fuel in her but after riding a little bit and talking with a friend I realized that it had some severe jetting issues. I was running wayyyy tooo lean. She was "coughing"at higher RPMS, didn't even get to a 100 without effort. So she is grounded till Friday, that's when the jetting kit comes in. I was soooooo cclllooooooseeee...
__________________________________________________
"Life is like riding - You can either tear the fastlane in half or stay in the slipstream trying to play catch up." -Baron Last futzed with by Baron; May 26th, 2016 at 09:36 PM. |
1 out of 1 members found this post helpful. |
May 25th, 2016, 12:48 PM | #2 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
May 25th, 2016, 04:15 PM | #3 |
Urban Legend
Name: Baron
Location: Brampton, ON
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250R SE - Circe Posts: 542
|
__________________________________________________
"Life is like riding - You can either tear the fastlane in half or stay in the slipstream trying to play catch up." -Baron |
|
May 25th, 2016, 05:20 PM | #4 |
cadd cadd cadd
Name: Cadd
Location: 41°21'13.1"N, 74°41'37.4"W
Join Date: Jan 2014 Motorcycle(s): 300 Posts: A lot.
MOTM - May '15
|
Welcome back!!
__________________________________________________
Riding it like I financed it. |
|
June 16th, 2016, 12:56 AM | #5 |
Urban Legend
Name: Baron
Location: Brampton, ON
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250R SE - Circe Posts: 542
|
Cheers.
Still too busy with a lot of things. Hopefully I can be a bit more active and share what I have learnt over the course of the rebuild. Might not be new to most but might interest the newer members like myself.
__________________________________________________
"Life is like riding - You can either tear the fastlane in half or stay in the slipstream trying to play catch up." -Baron |
|
June 16th, 2016, 12:58 AM | #6 |
Urban Legend
Name: Baron
Location: Brampton, ON
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250R SE - Circe Posts: 542
|
Quick update :
Fairings painted and ready to get on. Still struggling with the carbs but I'll make a separate thread for getting that issue dealt with.
__________________________________________________
"Life is like riding - You can either tear the fastlane in half or stay in the slipstream trying to play catch up." -Baron |
|
July 2nd, 2016, 11:48 AM | #7 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E Posts: Too much.
Blog Entries: 7
|
Looks good so far.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Say hello To Circe | Baron | Pictures | 10 | May 14th, 2014 08:38 AM |
Thread Tools | |
|
|