May 22nd, 2011, 01:15 PM | #1 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
FDB (ebay) LED Tail light....anyone bought these?
On ebay looking for a nice LED taillight, and found this one:
http://cgi.ebay.com/ebaymotors/08-11...Q5fAccessories Has the integrated turn signals and etc.....I've read the feedback and etc, just leary of buying from overseas, but thats a good deal... Has anyone bought from overseas? thoughts? |
|
May 22nd, 2011, 01:37 PM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Thanks for bringing this to my attention! Best price I've seen (closest was D2moto with 40% off for $48 + $6s&h but they won't restock).
To answer your question, half the stuff I order these days comes from Hong Kong. It takes a long time but shipping is usually cheaper than the greedy jerks selling locally (somehow). This guy is actually a San Diegan, so I can go yell at him directly if I have too. |
|
May 22nd, 2011, 01:40 PM | #3 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Thanks...went ahead and pulled the trigger....only 39.96 shipped.
|
|
May 22nd, 2011, 02:00 PM | #4 |
ninjette.org member
Name: justin
Location: Odessa
Join Date: May 2011 Motorcycle(s): 2009 blue ninja 250r Posts: 223
|
I'd like to see some end result pics I might be ordering em to if they fit right
__________________________________________________
If you’re going to lead, then lead. If you’re going to follow, get the hell out of my way! |
|
May 22nd, 2011, 02:03 PM | #5 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
|
|
May 22nd, 2011, 02:08 PM | #6 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I put in a bid on a clear one. I didn't bid near the buy-it-now price because I'd buy smoke if I was going to pay the full price.
|
|
May 22nd, 2011, 02:29 PM | #7 | |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Quote:
Clear: http://cgi.ebay.com/ebaymotors/08-11...Q5fAccessories Smoke: http://cgi.ebay.com/ebaymotors/08-11...Q5fAccessories I HOPE thats smoke...LOL and not just a weird angle. It says I'll get whats pictured....we'll see in a few weeks when it arrives haha |
|
|
May 22nd, 2011, 02:43 PM | #8 |
ninjette.org sage
Name: Joseph
Location: Winter Park, FL
Join Date: May 2011 Motorcycle(s): 2011 250R Black, 2005 ZX-6R Blue Posts: 623
|
I have this seller saved ans was wondering the same. I may buy it Monday.
|
|
May 22nd, 2011, 04:18 PM | #9 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
And, yes, I am aware of it. I'm saying that potential price of the clear one is much lower if it doesn't get bid up much higher ($17.xx). I put in a bid higer than $17.xx but cheap enough to still be worth saving over the smoke version. I wouldn't bid $28 on the color I don't want and have to wait 5 days longer just to save a single dollar and end up with the less desired color. Edit: Did anyone notice that shipping is half the price for each additional item? I'm tempted to order two because I know someone else in SD will want one. |
|
|
May 22nd, 2011, 04:33 PM | #10 | |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Quote:
|
|
|
May 22nd, 2011, 04:41 PM | #11 |
Climb to Glory!
Name: Charlie
Location: Las Vegas
Join Date: Mar 2011 Motorcycle(s): 2011 Kawasaki Ninja 250R White (sold) Posts: 234
|
price looks good
__________________________________________________
I wanted to become Kamen Rider as a kid. |
|
May 22nd, 2011, 06:55 PM | #12 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Looks just like the light Slingshot has available for me to resale at $100. There a reason why I'm going to quit selling tail lights. No matter how low I go here someone in china has it for less than half.
__________________________________________________
Sportisimoto USA is born. |
|
May 22nd, 2011, 08:27 PM | #13 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Maybe if you differentiate yourself by selling kits with flushmount front blinkers and LED flasher relays? Heck, you could probably buy and resell from this guy if he's actually able to make a profit at $17.xx+ $5 shipping! It'd also go well bundled with a Sportisi undertail, which is why I'm buying one.
|
|
May 22nd, 2011, 08:56 PM | #14 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Thats a really good price... it's to bad it's not the version I want... I prefer these:
They seem to have a lot more LED's than the one pictured which is similar to the BikeMonkey one... guess I need to do some searching to see if I can find the BikeLitez integrated LED taillight.
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
May 22nd, 2011, 09:09 PM | #15 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Actually, I think that's just the ripples in the reflector/collector and lens causing a duplication effect. According to Matt/ztrack, ALL integrated tail lights so far are from the same supplier no matter what the brand name (DMP, BikeMonkey, etc). He says that this cheap one looks just like his current supplier, thus, this is no different.
|
|
May 22nd, 2011, 09:34 PM | #16 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
It was by far the cheapest I could find out there....Looks like his warranty and stuff was good....hopefully it can get here within 10 days....
|
|
May 22nd, 2011, 10:26 PM | #17 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Sorry... the 2 are definitely completely different... I guess instead of that picture, how about a youtube video of it working:
Bikelitez Integrated Taillight:
Link to original page on YouTube.
Link to original page on YouTube.
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
May 22nd, 2011, 10:41 PM | #18 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
Interesting, I kinda like the bikemonkey more though, but i don't think the bike monkey and this ebay one is the same.
|
|
May 22nd, 2011, 10:44 PM | #19 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
I'm fairly certain that they are not the same as either of the ones I posted... just more that they aren't all the same
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
May 23rd, 2011, 06:43 AM | #20 |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
Yeah, they're different compared to the two. I'm kinda concern about it being not that visible though. But I'm still interested.
|
|
May 27th, 2011, 05:50 PM | #21 |
ninjette.org member
Name: Fernando
Location: Tolleson, az
Join Date: Sep 2009 Motorcycle(s): 08 ninja 250r Posts: 24
|
So I decided to pull the trigger on one of this, and they have an issue with the smoked ones. They emailed me saying it would take about a week or two before they could ship them, I changed it to the clear one and it was shipped on the same day.
|
|
May 27th, 2011, 06:24 PM | #22 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
I bought the same, but opted to wait for the smoke one..
|
|
May 27th, 2011, 06:44 PM | #23 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I see that he's listing smoke ones for bidding now. I saved over $10 by bidding: I just won a clear one for $19.50 + $9.98 S&H
I figure that I can tint it if I ever need to and I had already placed my bid before the biddable smoke ones showed up. Anyway, oddly, the other clear one was bid up to $20.50 and hasn't closed yet (~5mins). |
|
May 28th, 2011, 08:29 AM | #24 |
ninjette.org guru
Name: Natalie
Location: La Puente, CA
Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455
|
I have a bikemonkey model, actually its dmp, but mine doesn't work the same way that video does. When I turn on my signals, my brake light stays on. His alternates with the turn signal. That guy must not have it wired correctly.
__________________________________________________
'10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents |
|
May 29th, 2011, 03:31 PM | #25 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Im pretty excited for mine...I wasnt going to get one at all, but couldnt pass up that price, so I wont be dissapointed in mine.
|
|
June 5th, 2011, 01:02 PM | #26 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
It looks like the prices have gone up about $10. Now they are almost the same price as the cheapest I've seen on eBay and D2Moto (after WS40 40% off coupon) prior. Of course, D2Moto never had it in stock.
This was bound to happen until someone else decides to compete at that price. |
|
June 7th, 2011, 07:59 PM | #27 |
ninjette.org member
Name: Shikari
Location: NJ
Join Date: Jun 2011 Motorcycle(s): 11' 250R Posts: 27
|
Just got one in the mail took the gamble on it and i am impressed by the tail light. Quality of it is better than the stock, the lights are bright, and installation so far has been a snap (got too dark out to finish). The fit seems to be pretty good also (like i said too dark to finish the install.) Ill try to write up a full review of it with pics and video when I can. Shipping was quick too considering it came from china only took 4 days.
|
|
June 7th, 2011, 08:56 PM | #28 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
The guy is local to me here in San Diego (orders ship from China). I asked him about looking for other parts for the 250R from China and he said he'd look into it. Particularly, all the fairing kits include aftermarket solo seat cowl parts but none will sell it alone despite the fact that the market is under-served.
That said, I paid for mine over a week ago and haven't received anything. |
|
June 8th, 2011, 06:08 AM | #29 | |
There's a limit to s2pdty
Name: A.D.
Location: NoVa the burg
Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.
|
Quote:
|
|
|
June 9th, 2011, 01:53 PM | #30 |
Opinionated individual :)
Name: SecretNinjaMan
Location: Nor Cal
Join Date: May 2011 Motorcycle(s): 2010 Ninjette Special Edition (red/black) Posts: 342
|
Yes, write ups on this product please!
interested
__________________________________________________
Yoshi slip on, shimmed 2 washers, zip tie throttle mod, pre-load #2, snorkel delete 2010 SE 250R! Miles in the saddle: 1000 |
|
June 9th, 2011, 05:38 PM | #31 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I finally got my shipping confirmation last night over a week after payment. I wonder if that means it was still in China? Meh... the price was right (won mine for under $20). I'm happy.
|
|
June 9th, 2011, 05:44 PM | #32 |
ninjette.org member
Name: Shikari
Location: NJ
Join Date: Jun 2011 Motorcycle(s): 11' 250R Posts: 27
|
Will try to get a vid tomorrow its storming here now, rather not go out lol
|
|
June 10th, 2011, 05:53 PM | #33 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
Just installed mine as well....looks GREAT, good quality and plenty bright enough...I didnt hook up the flashers, as I'm using my stockers...but this is a GREAT BUY
|
|
June 10th, 2011, 09:52 PM | #34 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
June 13th, 2011, 09:20 AM | #35 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
|
|
June 13th, 2011, 06:05 PM | #36 |
ninjette.org member
Name: Michael
Location: Indianapolis
Join Date: May 2011 Motorcycle(s): 2008 Blue Ninja 250r Posts: 112
|
here are some pics I snapped today..
|
|
June 18th, 2011, 02:11 PM | #37 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I just got mine. Doesn't really fit in the Sportisi undertail without grinding something down. The lens has a melted spot on the top that looks like someone left a burning cigarette sitting on it. I recommend against the clear lens because there is also some bubbly adhesive or seal that is a bit too ugly and visible. Since he's local, perhaps the seller will want to take a look at it. I'm emailing him now.
|
|
June 19th, 2011, 04:17 PM | #38 |
Sexy Beast
Name: Mat
Location: Tampa
Join Date: Mar 2011 Motorcycle(s): 2010 Ninja 250R, 2006 ZX-14, 2012 Ducati Monster Posts: A lot.
|
anybody else have pics?
|
|
June 19th, 2011, 09:50 PM | #39 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Here's mine with the cosmetic defect.
The OEM one seems to have the same lens catches so I'm going to see if I can switch to the OEM lens. FWFW, it's a tight fit, but the OEM tail light does fit the undertail while I'd have to crack it to force the FDB one in. |
|
July 7th, 2011, 03:12 AM | #40 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
OK, I received my replacement on Tuesday. Like everyone else, there is a small imperfection on the top edge just to the right of the middle, which is the same place where my original was missing a large chunk. I'm guessing that theycome out of the mold with some excess still attached there and they pull mine off while it was still warm, hence, why it looks melted and the replacement along with everyone else's looks like a rough break.
Anyway, they never told me what to do with the original. I attempted to release the lense to see if I could swap with OEM but it started cracking up. Because the replacement isn't going to fit my undertail either, I'd like to experiment on the original if they don't want it back. I don't like that it just looks like a rectangle in the dark. The Bike Monkey style one looks much better. I'd like to diffuse the light somehow so that I can see the shape of the lens like I can with the OEM one. Any ideas on how to acheive this? I need to sand down the edges to fit the undertail. I'd like to hide it with black or red electrical tape. I think red would be best if I can also paint the lens red or smoke red. I can't afford the $30-$40 lens paints I've seen online so I'm thinking about ordering some model paint, like this and this. From what I understand, even specific lens-tinting paint could use a clear coat. Will any clearcoat do? If I can salvage the original tail light and the seller is OK with letting me keep it, I will use it instead. FWIW, I still would have wanted the replacement because I would not have to sand the top side down (it remains fully exposed in the stock tail and aftermarket undertail). |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ebay Integrated Tail Light HELP!!! lol | ilovejesus | 2008 - 2012 Ninja 250R Farkles | 9 | October 29th, 2012 12:47 PM |
FS: Original brake light or FDB integrated tail light (current generation) | CZroe | Motorcycle-related | 9 | September 11th, 2011 06:23 PM |
FDB eBay Tail Light Review | Shikari99 | 2008 - 2012 Ninja 250R Farkles | 9 | June 21st, 2011 05:05 PM |
eBay integrated tail light? | CZroe | 2008 - 2012 Ninja 250R Farkles | 4 | March 22nd, 2011 07:52 PM |
|
|