[kropotkin thinks...] - Tom's Tech Treasures: Aero, Tanks, And Exhausts From The Barc

[Ninjette Newsbot]

If you enjoyed reading this article, please click here to view it on Kropotkin's site, MotoGP Matters.

-----------------


Switchgear on Johann Zarco's KTM RC16
Peter Bom/David Emmett: Color-coded buttons (with labels) on the left handlebar of Zarco's KTM, green for traction control (TC), red for engine brake (EB), colors chosen for self-evident reasons. The thumb lever with the N on it below the handlebar is used for engaging neutral. You do not want to engage neutral while on track, so it is locked out and impossible to engage during normal riding. The position of this lever varies per rider: Zarco is not using a thumb brake, so can mount it on the left handlebar.


Triple clamp and left and right handlebars on Johann Zarco's KTM RC16
Peter Bom/David Emmett: ' There is a lot to see here. On the right handlebar, Zarco has two buttons, again color-coded. The blue button (LC) is for launch control. What the green button (CE) is for is not clear, though the most likely explanation is either the engine kill switch or the pit lane limiter.
Note the slotted top triple clamp. That is one way of managing flex, something which Yamaha also uses. Look carefully at the small locking bolts running in the slots behind the triple clamps. This is a way of ensuring the two handlebar clipons are in exactly the same position on each side.