July 26th, 2011, 10:22 AM | #1 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
cheap dented aftermarket exh
Need that 54t sprocket and a cheap banger crashed crappy slip on exhaust.
scratches don't matter. I don't want to put my Yoshi Full on a bent frame in case I bend the tabs on the header or something. Just need a crappy ol beater exhaust that looks terrible. One of those minimal race exhaust will do. Willing to trade pieces I pull off my bike for the sprocket, chain and exhaust. Or I have a few bucks or whatever.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
July 26th, 2011, 12:44 PM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
You mean, 45t, right?
|
|
July 26th, 2011, 04:14 PM | #3 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
54t.
+9 rear. If that's not enough I will also drop the front sprocket a tooth. Should be just about what I need though without dropping the front. Chain tool is waiting to make custom length. Just thought I'd see if anyone had one laying around they played with. Exh or sprocket wise. Looks like I'll end up buying new. The sprocket is like $65 or something. I'll look for a banged up exh on ebay. Maybe I'll just drill the rivets and pull the guts from the one I have already and rivet it back together.The exh helps with lower end and the sprocket is for stunts. Might even be fun to corner with on some of the tighter SoCal roads. I feel like experimenting.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
July 26th, 2011, 10:47 PM | #4 |
ninjette.org member
Name: Kai
Location: chicago
Join Date: Mar 2011 Motorcycle(s): 2010 Kawasaki Ninja 250R Posts: 98
|
i have a set of bang up full exhaust system...shoot me an offer
http://www.ninjette.org/forums/showthread.php?t=78120 |
|
July 26th, 2011, 11:43 PM | #5 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
I have stock headers if you want them? There just sitting in my room lol I'll bring them on the tech day! Or if you want to come grab them or want me to bring them to you I can
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
October 23rd, 2011, 09:14 PM | #6 |
ninjette.org member
Name: omar
Location: san diego
Join Date: May 2010 Motorcycle(s): cbr 600rr, ninja 250 Posts: 40
|
I have a beat up area p full exhaust (prior to the "race" version), 12" carbon muffler and bracket to replace the passenger peg. Shouldnt be too hard to straighten out, but the can has a fair amount of scratches.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[crash.net - WSBK] - De Puniet's confidence dented after high-side | Ninjette Newsbot | Motorcycling News | 0 | January 29th, 2015 04:40 AM |
Aftermarket V-Rossi wheels bearings are cheap | NinjaZX6R123 | 2008 - 2012 Ninja 250R Farkles | 3 | June 24th, 2014 12:35 PM |
Dented carbon muffler | beniblanco | 2008 - 2012 Ninja 250R Tech Talk | 4 | April 21st, 2014 10:10 PM |
'12 badly dented green gas tank, free if... | IF13 | Free stuff! | 5 | October 2nd, 2013 04:21 PM |
FREE '08 Black Gas Tank (dented) | currentsea | Motorcycle-related | 5 | December 26th, 2009 07:55 AM |
|
|