April 29th, 2009, 03:36 PM | #1 |
ninjette.org member
Name: Scott
Location: Cincinnati
Join Date: Apr 2009 Motorcycle(s): '08 Ninja 250r Posts: 66
|
GSXR Exhaust on the 250
on my 08 ninja 250 i have the gsxr exhaust mod on it and it sounds good and deep. im thinking about doing a jet kit very soon and was wondering if anyone has the same setup with a jet kit? i have a slight flat spot during middle rpms....and im thinking the jet kit would cure all lol
__________________________________________________
2008 Red Ninja 250r |
|
April 29th, 2009, 03:49 PM | #2 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
I had this same exhaust on my 08 250 I believe my jetting went as follow 98 jet and clip at the 3rd ring and 3 turns out the stock jets are 98 as well but the dynojet jets are a little bigger. I played around with a 100 jet but it just dident work out for me you could do a search and find a lot of good info
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
April 29th, 2009, 03:51 PM | #3 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
and a few pics
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
April 29th, 2009, 04:16 PM | #4 |
ninjette.org member
Name: Scott
Location: Cincinnati
Join Date: Apr 2009 Motorcycle(s): '08 Ninja 250r Posts: 66
|
nice...mine looks just like that....i ordered a dynojet kit a few days ago...hoping it will work..what problems did you have with the bigger jets?
__________________________________________________
2008 Red Ninja 250r |
|
April 29th, 2009, 04:28 PM | #5 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
That mod looks sweet!!
|
|
April 29th, 2009, 04:52 PM | #6 |
ninjette.org guru
Name: mike
Location: tucson az
Join Date: Dec 2008 Motorcycle(s): ninja 250r Posts: 371
|
it just ran to rich even playing around with the clip positions and the mix screws, if you haven't taken the carbs apart before do a search there is alot of info on this mod out their
__________________________________________________
08 250R: sportisi VR full exhaust, Dynojet, custom seat, kleen air rmvd, rim tape, grips, fender chop,zg db windscreen,k&n air filter,15t front sprocket,sportisi-usa clipons,solo seat cowl |
|
April 29th, 2009, 10:36 PM | #7 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
Have you tried shimming the carb needles already? I plan on doing the same exhaust soon, I'm curious to this as well... I'm also curious if just shimming the needles does a good job by itself.
|
|
April 30th, 2009, 05:34 AM | #8 |
ninjette.org member
Name: Scott
Location: Cincinnati
Join Date: Apr 2009 Motorcycle(s): '08 Ninja 250r Posts: 66
|
yea ive heard that too....im not exactly sure what shimming them does but i dont do any carb work myself so i would have to take it to a shop...I wonder how much they would charge to do that first?
__________________________________________________
2008 Red Ninja 250r |
|
April 30th, 2009, 11:20 PM | #9 |
The Grand Royal
Name: Cochese
Location: Unmarked Rustbox
Join Date: Dec 2008 Motorcycle(s): 2009 Ninja 250R Posts: 258
|
Mike, anyone with this can...
What is the inside diameter? I found a place to pick up universal baffle and fiberglass wrap but I need to know what the inside diameter is of the GSXR can so I can buy the right size... I'm cross posting in the GSXR can threads.... don't kill me. |
|
May 1st, 2009, 01:42 AM | #10 |
ninjette.org guru
Name: Nick
Location: Sacramento, California.
Join Date: Apr 2009 Motorcycle(s): 2009 Ninja 250r Posts: 379
|
When you do find out be sure to share . Not sure if all your officer buddies will approve of your loud exhaust? I haven't installed yet...but I can only imagine.. I have the stock can off with an open pipe and just starting it up to warm it up (making sure im not loosing oil) prompted a neighbor to come out and yell. Similar noise levels?
|
|
May 3rd, 2009, 10:32 PM | #11 | |
The Grand Royal
Name: Cochese
Location: Unmarked Rustbox
Join Date: Dec 2008 Motorcycle(s): 2009 Ninja 250R Posts: 258
|
Quote:
I visited the shop the other day and the shop tech fired it up with just the Area-P header, no can. Sounds like a harley. |
|
|
May 4th, 2009, 11:26 AM | #12 |
ninjette.org member
Name: eddy
Location: riverside
Join Date: May 2009 Motorcycle(s): 09 kawasaki ninja 250r Posts: 32
|
where do u get those tires, or do u customize the stock one's?
eddylz18
__________________________________________________
S.E kawasaki ninja 250r 09 |
|
May 4th, 2009, 12:03 PM | #13 |
ninjette.org member
Name: Matt
Location: Keller, TX
Join Date: Dec 2008 Motorcycle(s): 2008 Ebony Ninja 250R Posts: 137
|
It's rim tape.
Posted via Mobile Device |
|
May 4th, 2009, 11:31 PM | #14 |
ninjette.org member
Name: eddy
Location: riverside
Join Date: May 2009 Motorcycle(s): 09 kawasaki ninja 250r Posts: 32
|
thanks though but im talkin about the tire letters not the wheels
__________________________________________________
S.E kawasaki ninja 250r 09 |
|
May 9th, 2009, 11:06 PM | #15 |
ninjette.org member
Name: Sky
Location: Sacramento
Join Date: Mar 2009 Motorcycle(s): 250R 08 Posts: 63
|
Anyone have a clue about what jet to run the GSXR exhaust with?
I'm concerned with my dynojet since it doesn't have big enough jets for me as I'm gonna attempt this mod and get air pods. |
|
May 12th, 2009, 05:24 PM | #16 |
Blue Blue Blue
Name: Matt
Location: Mooresville, IN
Join Date: Mar 2009 Motorcycle(s): 2008 Candy Plasma Blue Ninja 250R Posts: 97
|
|
|
May 12th, 2009, 07:22 PM | #17 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
08's were split; some got Bridgestone BT-45's, others got Dunlop GT-501's. People generally like both of 'em. 09's got IRC Roadwinners. People generally don't like them as much. YMMV.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 12th, 2009, 09:58 PM | #18 |
ninjette.org sage
Name: patricK
Location: San Jose, CA--BAY AREA!
Join Date: Mar 2009 Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636. Posts: 918
|
videos of sound?
nm found one! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exhaust alignment between GSXR 600 & Ninja 250 | peteypetepeep | General Motorcycling Discussion | 25 | March 15th, 2014 10:35 AM |
black gsxr 2006 muffler with 08 ninja 250 exhaust modified...make offer | Darkshadow4ya | Motorcycle-related | 2 | January 10th, 2011 12:18 AM |
My Exhaust Sound...Gsxr Can | Tintkng | Videos | 10 | December 18th, 2010 09:58 AM |
first look at my new gsxr exhaust | PSO-08ninja250rblack | 2008 - 2012 Ninja 250R Farkles | 29 | April 30th, 2009 11:22 PM |
Custom GSXR Exhaust on a 250! | Panocha Rider | Videos | 4 | April 30th, 2009 01:40 AM |
|
|