May 17th, 2009, 10:39 AM | #1 |
ninjette.org member
Name: Dave
Location: San Diego
Join Date: Apr 2009 Motorcycle(s): 250 ninja 2002, 2008 ZX10-R Posts: 149
|
thoughts on emissions removal
Just did it. If you have a non-CA bike, don't worry, you're bike didn't come with any of the equip I removed.
Well, I was hoping for more weight savings, but looks like everything removed is prob in the neighborhood of 1lb or so. So, from a weight standpoint, not so good. Aestehitically, looking at the motor, it looks nicer. And I was a little concerned with some of the temps I was seeing on the temp guage when idleing on a warm day...haven't ridden on a hot day yet. (yes, my radiator is full and I use redline water wetter also). The CA charcoal canister is pegged right up there against the cylinder, which couldn't be good for heat transfer/airflow that help keeps the motor cool. Any one of these three reasons on their own (weight,looks,cooling issues) wouldn't have been enough to get me to remove the emissions, but collectively, it was enough. Especially with my wife beginning to ride, I wanted to get the bike as light as possible. For those interested, in order to get the bracket off holding the charcoal canister, you need to remove the lower cowl. You'll need to remove the plastic side panels and seat of course too. Like some others of you here, I'm really looking forward to the Area P exhaust. Doesn't mean I'll get one...but I'm somewhat excited about the prospect. Again, weight savings or performance gain alone wouldn't make me get the exhaust. But combine both, and it's hard to say no! |
|
May 17th, 2009, 10:45 AM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
watch out for the hose plumbing for the tank. if not done properly, the tank won't vent and the fuel will stop flowing while on the highway.
as a temporary fix, pop the gas cap each time this happens to you to get you home. if you do run into this problem, PM Vex as he's found a solution around it. |
|
May 17th, 2009, 11:09 AM | #3 | |
ninjette.org guru
Name: Purspeed
Location: Los Angeles, CA
Join Date: Nov 2008 Motorcycle(s): 2007 Ninja 250 Posts: 469
|
Quote:
I am keeping my emissions control stuff because California may be passing a new law which requires bikes to get smog checked similar to cars. This law would affect all 2000+ year models.
__________________________________________________
"This is my Ninja. There are many like it, but this one is mine..." ~ Purspeed (ca. Nov, 2008) |
|
|
May 17th, 2009, 11:14 AM | #4 | |
ninjette.org member
Name: Dave
Location: San Diego
Join Date: Apr 2009 Motorcycle(s): 250 ninja 2002, 2008 ZX10-R Posts: 149
|
Quote:
Yeah, I'll be keep the emissions anyway. You never know what these commies...ahem, legislators will do to get extra money by charging "inspection" fees...ahem, helping to protect the environment. |
|
|
May 18th, 2009, 06:33 AM | #5 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
Having been born and raised in California I know all about emissions. I hated it then and hate it now. Engines have become so much more efficient that we almost don't need it any more.
|
|
May 18th, 2009, 01:31 PM | #6 |
ninjette.org guru
Name: Purspeed
Location: Los Angeles, CA
Join Date: Nov 2008 Motorcycle(s): 2007 Ninja 250 Posts: 469
|
Worse yet, some mods that actually increase efficiency are not allowed. Welcome to the world of government regulation.
__________________________________________________
"This is my Ninja. There are many like it, but this one is mine..." ~ Purspeed (ca. Nov, 2008) |
|
May 25th, 2009, 06:49 AM | #7 | |
Livin' the Minimoto Life
Name: Mark
Location: Riding around in TX
Join Date: Mar 2009 Motorcycle(s): 2022 Honda Navi, 2018 Z-125 Pro Posts: A lot.
|
Quote:
Things like what you posted is going way overboard. Plus regulating what you can and can't put on your vehicle of choice is just flat retarded. "I can't put a supercharger on my Ford Mustang V8 because the gov't says I can't. Yet I have to get it tuned once a year anyway to make sure it is running with the proper air/fuel ratio to prevent my blowing up my motor. So I'm actually making my car run better than a beat up truck that is stock but is 7 years old. I take better care of my car, fix whatever leaks come up, keep it in tip top shape, but I can't put a S/C on it because it isn't CARB approved." Retarded I tell you! I think I got it right. Just gathered info from friends that live out there.
__________________________________________________
--- My IG Page --- My FB page! --- 2022 Honda Navi && 2018 Z-125 Pro |
|
|
June 21st, 2009, 06:04 PM | #8 |
ATGATT Squid Killer
Name: Chad
Location: So. Cal
Join Date: May 2009 Motorcycle(s): '06 CBR600 Posts: 189
|
I hate government intrusion into personal life as much as the next guy, but this is a pretty bad excuse, lol. Our bikes are water cooled, man. If the canister were in front of the RADIATOR blocking air flow, I'd remove the ****er in a second, but being off to the side like it is, it's really not hampering engine cooling. Water-cooled motorcycles will always be at the mercy of airflow past the radiator, not past the engine itself Main reason I'm not removing it is because when I decide to sell mine someday, I'm going to want it on there for any prospective buyer. But who knows, maybe I'll say **** it and yank it off in a month or so
|
|
July 14th, 2009, 07:33 AM | #9 | |
ninjette.org member
Name: Dave
Location: San Diego
Join Date: Apr 2009 Motorcycle(s): 250 ninja 2002, 2008 ZX10-R Posts: 149
|
Quote:
After riding around for a bit, I think I've come to the conclusion that I should have left it on there. Not really digging the gas smell. Sigh, but too lazy to put the emissions back on. So, unless you like smelling raw fuel smell while stopped at lights, ideling, leave the emissions on. That last 1.5 lbs or so isn't really worth it.
__________________________________________________
90 EX250 Ninja, 92 FZR600, 86 CR125, 77 GS750, 73 RD350, 86 CR250, RD350 in SRX250 frame, 75 RD350, 99 RM125, 99 GSXR750, 07 Reflex, 02 250 Ninja, 02 GSXR1k, 08 ZX10R, 07 250 Ninja, 05 250 ninja |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CA Emissions removal | Olie | 2008 - 2012 Ninja 250R Tech Talk | 19 | April 30th, 2014 10:39 PM |
Airbox removal + Kleen air removal? | MikeBudd | 2008 - 2012 Ninja 250R Tech Talk | 6 | February 16th, 2012 04:57 PM |
California Emissions Removal | Bo0stZomb13 | 2008 - 2012 Ninja 250R Tech Talk | 3 | May 6th, 2011 02:39 PM |
California Emissions Removal | SdSy675 | 2008 - 2012 Ninja 250R Tech Talk | 1 | April 19th, 2011 12:27 PM |
CA Emissions Removal question (carb parts) | CynicalC | 1986 - 2007 Ninja 250R Tech Talk | 6 | March 17th, 2011 09:18 AM |
|
|