ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old March 31st, 2014, 08:22 PM   #1
elephantman78
ninjette.org newbie
 
Name: Chane
Location: Bmt. Tx
Join Date: Oct 2013

Motorcycle(s): 06 ninja 250, 98 cb750

Posts: 5
My 07 250 cafe racer build

I picked up an 06 ninja 250 that had been wrecked and setting since 09. The fairings were trash so I started ditching all that stuff. Then the normal steps to get it running again. It's pretty much finished mechanically. Next is to paint it but not sure if I will or not. As I have another project now.

Look forward to some honest criticism
Attached Images
File Type: jpg image.jpg (170.0 KB, 70 views)

Last futzed with by elephantman78; April 1st, 2014 at 08:18 AM.
elephantman78 is offline   Reply With Quote




Old March 31st, 2014, 08:25 PM   #2
elephantman78
ninjette.org newbie
 
Name: Chane
Location: Bmt. Tx
Join Date: Oct 2013

Motorcycle(s): 06 ninja 250, 98 cb750

Posts: 5
Pic 2










Last futzed with by elephantman78; April 1st, 2014 at 08:31 AM.
elephantman78 is offline   Reply With Quote


Old April 1st, 2014, 12:23 AM   #3
tiii
ninjette.org member
 
tiii's Avatar
 
Name: tony
Location: San Francisco
Join Date: Mar 2014

Motorcycle(s): 03 Ninja 250

Posts: 28
Nice job. I like streetfighters a little more than cafe racers, however this looks pretty badass.
__________________________________________________
Tony
tiii is offline   Reply With Quote


Old April 1st, 2014, 09:25 AM   #4
Mortifer
ninjette.org member
 
Name: Mike
Location: San Jose, CA
Join Date: Mar 2010

Motorcycle(s): 01 250 "Cafe Racer"

Posts: 23
nice work, how loud are those mufflers? is there anything left inside?
Mortifer is offline   Reply With Quote


Old April 1st, 2014, 09:54 AM   #5
elephantman78
ninjette.org newbie
 
Name: Chane
Location: Bmt. Tx
Join Date: Oct 2013

Motorcycle(s): 06 ninja 250, 98 cb750

Posts: 5
I couldn't tell you compared to stock. Just the ends are cut out and it's hollow about 6 inches in. Which gives it the nice resonated sound. Id say Its probably louder then my cb750 stock exhaust. I must say I like my exhaust loud. One of the pic has my pt cruiser in the back ground that has working side pipes. So loud to me is probably insanely loud to others.
Attached Images
File Type: jpg image.jpg (42.7 KB, 5 views)
elephantman78 is offline   Reply With Quote


Old June 19th, 2014, 07:34 PM   #6
crazymadbastard
I'm crazy,your excuse is?
 
crazymadbastard's Avatar
 
Name: Winston
Location: Connecticut
Join Date: May 2013

Motorcycle(s): 250 2007 ninja

Posts: A lot.
I would cut the mufflers more so the little pipes look like gatting gun turrets sticking out.
__________________________________________________
My Cafe Racer Build
My intro post
crazymadbastard is offline   Reply With Quote


Old June 21st, 2014, 09:37 AM   #7
LordRahl007
That one guy
 
LordRahl007's Avatar
 
Name: Benjamin
Location: DFW, TX
Join Date: Jun 2014

Motorcycle(s): Green 2002 Ninja 250

Posts: 7
Quote:
Originally Posted by crazymadbastard View Post
I would cut the mufflers more so the little pipes look like gatting gun turrets sticking out.
That's not a bad idea. I've already removed the baffles, and I was originally planning to cut out the end of the cans like he has in the pictures, but I may just have to see how far in those little pipes are. If they can be exposed without cutting off the mounting point then I may have to look into doing that. Right now mine is in the first stages of the cafe project, I've only pulled the covers off the bike, haven't really done anything else yet.
LordRahl007 is offline   Reply With Quote


Old June 30th, 2014, 09:24 AM   #8
Singh2jz
ninjette.org certified postwhore
 
Singh2jz's Avatar
 
Name: Inderveer
Location: San Jose
Join Date: Nov 2012

Motorcycle(s): '07 ex250-F/J

Posts: A lot.
Quote:
Originally Posted by tiii View Post
Nice job. I like streetfighters a little more than cafe racers, however this looks pretty badass.
+1. I think it's the paint. Looks really good.

Great job! :thumb up:
__________________________________________________
The Bike | The Truck
Singh2jz is offline   Reply With Quote


Old December 14th, 2014, 09:14 AM   #9
Hasersys
ninjette.org member
 
Hasersys's Avatar
 
Name: Hasersys
Location: Florida
Join Date: Dec 2014

Motorcycle(s): Have owned Ninja250,EX500,Xj650,RD250,XV750

Posts: 70
I like it. I am currently working on a project that will be similar to this. I was wondering what if any jetting you have used for that air filter an exhaust setup. Also what head light and rear farring is that?
Hasersys is offline   Reply With Quote


Old December 24th, 2014, 10:43 AM   #10
Widower
ninjette.org newbie
 
Name: Cameron
Location: Charlotte/Boone/Chapel Hill
Join Date: Dec 2014

Motorcycle(s): '07 Ninja EX250r

Posts: 1
Does the carb stay in place without any issues? Without the air box to hold it in place does it have any issues rattling?
Also what size is the air filter attachments for the carb and where did you put your battery?
Sorry, I'm new to this. I love the build by the way.
Widower is offline   Reply With Quote


Old December 24th, 2014, 12:11 PM   #11
drewsley
ninjette.org member
 
Name: andrew
Location: alabama
Join Date: Jul 2014

Motorcycle(s): 89 Ninja 250

Posts: 22
Where did you find the tail piece!!! That's all I lack for mine!
drewsley is offline   Reply With Quote


Old December 25th, 2014, 05:20 AM   #12
Kruse08
ninjette.org member
 
Kruse08's Avatar
 
Name: Brandon
Location: Cleveland, OH
Join Date: May 2014

Motorcycle(s): 99 Ninja 250

Posts: 217
After removing the end plates off the mufflers would the carbs need to be jetted?
__________________________________________________
Everything you’ve ever wanted is on the other side of fear. –George Addair
Kruse08 is offline   Reply With Quote


Old December 25th, 2014, 07:09 AM   #13
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Quote:
Originally Posted by Kruse08 View Post
After removing the end plates off the mufflers would the carbs need to be jetted?
Personally no, and I wouldn't cut the mufflers.

but I do recommend adjusting the idle jets and shimming the main needles, at the very most go up on size on the main jets.
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
250 cafe racer StephenA 1986 - 2007 Ninja 250R Farkles 41 February 20th, 2019 10:38 AM
Ninja 250 racer build thread bitaria Ninjettes At Speed 81 December 8th, 2015 08:19 AM
My Cafe Racer Build girlracer 1986 - 2007 Ninja 250R Farkles 17 December 2nd, 2014 08:14 AM
99 Ex 250 project Cafe/streetfighter, The build thread. cerberusrex25 1986 - 2007 Ninja 250R Tech Talk 260 June 14th, 2014 04:27 PM
[topix.net] - Goosing the Goose: Making a Cafe Racer out of the Guzzi V7 Cafe Ninjette Newsbot Motorcycling News 0 September 10th, 2011 01:00 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 11:46 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.