May 5th, 2014, 10:10 PM | #1 |
ninjette.org member
Name: Vadim
Location: Seattle Area
Join Date: Apr 2014 Motorcycle(s): 2012 Ninja 250 Posts: 64
|
Chinese Ebay Fender Eliminator
So I did not make any closeups of the eliminator, but I could later tommorow. I just have a general look from behind the bike. But to start off, the eliminator cost $56.55. Took 9 days to get from china to Washington, and was packaged well. There was no manual, but that was stated in the AD, but it came with a LED plate light, all bolts and extras required to fit the eliminator, and the kit it self. I had some trouble assembling since there was no guide, but I went back to the page where I bought it, and just looked at the factory pictures, which did help. The fit looks great, just had to cut wires for the plate light to refit to the LEDs. Other than that you can use the stock signals, but the brackets that hold the signals don't really look good since they were tilted to inward making the signals turn towards the bike, \-/ like that instead of the stock -=-, I had to drill a bit to make the brackets go on a bit straighter, so now the signals go like this, /=\. It looks good, the plate LED lights looks cheap but its really bright. The only downside is that the light does not seem to really shine on the plate as much, but instead shine out like the brake light. But it makes me be seen better at night.
BEFORE KIT: Heres the link to the item: http://www.ebay.com/itm/300757267716...84.m1439.l2649 This is what the bike looks like with it: |
|
May 5th, 2014, 10:24 PM | #2 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Oh excellent! That's one I've been looking at.
Overall how does it fit against the tail light and undertail? I'd really like a close up picture of the edges that come up to be against the cover of the tail light (my undertail has broken there so this was one of the only kits I found that covers the hole I have). Is it possible to bend the license plate light down to shine more on the plate vs out behind you?
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
May 5th, 2014, 10:35 PM | #3 | |
ninjette.org member
Name: Vadim
Location: Seattle Area
Join Date: Apr 2014 Motorcycle(s): 2012 Ninja 250 Posts: 64
|
Quote:
|
|
|
May 6th, 2014, 11:45 AM | #4 |
ninjette.org member
Name: Vadim
Location: Seattle Area
Join Date: Apr 2014 Motorcycle(s): 2012 Ninja 250 Posts: 64
|
|
|
May 6th, 2014, 12:08 PM | #5 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Perfect! Thank you!
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chinese rear sets from ebay! | TeleRomeo | 2008 - 2012 Ninja 250R Tech Talk | 10 | June 25th, 2013 08:47 PM |
Fender Eliminator w/LED (eBay) | mfresh | 2008 - 2012 Ninja 250R Farkles | 12 | February 18th, 2013 10:42 AM |
Chinese Motorcycle Purse Snatchers vs Chinese Mob | akima | Videos | 10 | May 23rd, 2012 09:34 AM |
Comp Werkes Fender Eliminator (Ebay) Three left at the moment | cbowman78 | Motorcycle-related | 2 | January 9th, 2011 05:56 PM |
eBay DIY Fender Eliminator with LED | jonthechron | 2008 - 2012 Ninja 250R Farkles | 30 | April 10th, 2010 11:47 AM |
|
|