ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Notices

Reply
 
Thread Tools
Old February 12th, 2018, 07:22 PM   #1
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Track Bike Take Off Parts

I converted my 2004 Ninja 250 Track Bike back to street duty to have a better chance of selling her. I took off a bunch of track related parts that others may want for a similar track bike project:

Cobra F1 Exhaust (make reasonable offer, shipping is ~$35 for these) - Pregen only, has new gaskets. You need to use your stock mounting clamps.
Pregen Brake Pads (make offer) - EBC HH Sintered new in the pack.
SSR Screw On Gas Cap (make offer) - Has a few dings, but worked well at the track.
13 Tooth Counter Shaft Sprocket (make offer) - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe.

If you want more than one item, I may make a deal.

You can check out my time with these parts at my blog at:http://http://mymotorbikeobsessions.blogspot.com

All parts will be cleaned and ready to install. Sorry for the inverted pictures, but the forum software is being stupid. Hit me up with a PM if interested.
Attached Images
File Type: jpg fullsizeoutput_853.jpg (107.4 KB, 1 views)
File Type: jpg IMG_4432.jpg (79.3 KB, 1 views)
File Type: jpg IMG_4435.jpg (82.1 KB, 1 views)
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions

Last futzed with by AchyGrappler; February 22nd, 2018 at 03:51 PM.
AchyGrappler is offline   Reply With Quote




Old February 12th, 2018, 07:57 PM   #2
Z1R rider
ninjette.org certified postwhore
 
Z1R rider's Avatar
 
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014

Motorcycle(s): 1978 Z1R, 1999 EX250

Posts: A lot.
MOTY - 2018, MOTM - Oct '16
are those exhaust cans slip-ons or a full header?
__________________________________________________
top of the day to ya Unregistered
Z1R rider is offline   Reply With Quote


Old February 12th, 2018, 08:09 PM   #3
Ghostt
in your machine
 
Ghostt's Avatar
 
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014

Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN"

Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
Pm sent
__________________________________________________
violente et ignorantia

ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
Ghostt is offline   Reply With Quote


Old February 12th, 2018, 08:32 PM   #4
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Quote:
Originally Posted by Z1R rider View Post
are those exhaust cans slip-ons or a full header?
Slip on. They attach where the stock mufflers attach underneath the engine.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 12th, 2018, 08:32 PM   #5
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Quote:
Originally Posted by Ghostt View Post
Pm sent
Replied
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 12th, 2018, 08:34 PM   #6
Z1R rider
ninjette.org certified postwhore
 
Z1R rider's Avatar
 
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014

Motorcycle(s): 1978 Z1R, 1999 EX250

Posts: A lot.
MOTY - 2018, MOTM - Oct '16
Quote:
Originally Posted by AchyGrappler View Post
Slip on. They attach where the stock mufflers attach underneath the engine.
Ok, thanks for the quick response.
__________________________________________________
top of the day to ya Unregistered
Z1R rider is offline   Reply With Quote


Old February 12th, 2018, 08:37 PM   #7
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
I found some more parts in the bin when I was packaging things up for sale:

Pregen Brake Pads $25 - EBC HH Sintered new in the pack.
SSR Screw On Gas Cap $15 - Has a few dings, but worked well at the track.
13 Tooth Counter Shaft Sprocket $10 - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe.
Attached Images
File Type: jpg fullsizeoutput_853.jpg (107.4 KB, 5 views)
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 13th, 2018, 08:55 AM   #8
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
PM sent.
tgold is offline   Reply With Quote


Old February 13th, 2018, 01:21 PM   #9
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Brake lever guard, shark fin and timer are sold.

Exhaust and gas cap are pending.

Clip Ons, pegs, rear set brackets, 13T sprocket and brake pads still up for grabs. Entertaining offers!
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions

Last futzed with by AchyGrappler; February 14th, 2018 at 08:25 AM.
AchyGrappler is offline   Reply With Quote


Old February 18th, 2018, 02:51 PM   #10
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Going out of the Ninja business sale!

The final hours of my big blowout sale are here. I'm trying to raise money to buy a steel shoe for the start of the flat track racing season so everything has got to go! Here are my package deals:

The "Woah and Go" pack - Brand new, in the wrapper EBC FA129HH Sintered Front Brake pads AND a 13 tooth countershaft sprocket. Get up to speed quickly with the sprocket and haul your speed down with some new brake pads. $30 shipped to the continental US. Fits Pregen Ninja 250s.

The "Down Low" pack - The best mainland Chinese ergonomic mods you can buy for your Pregen Ninjette combined with American know how and fabrication to get your feet up and back and get your upper body crouched low behind the windscreen. 36mm clip-on handle bars with spare bars, New chrome race pegs and home-built, organic, free range rear set relocation brackets will have your body positioned on your little Ninja just like Johnny Rea. $25 shipped to the continental US.

Hit me up with a private message. I take PayPal. Get them before they are gone!!
Attached Images
File Type: jpg fullsizeoutput_85d.jpg (132.0 KB, 0 views)
File Type: jpg fullsizeoutput_85c.jpg (116.9 KB, 0 views)
File Type: jpg fullsizeoutput_85b.jpg (76.6 KB, 2 views)
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions

Last futzed with by AchyGrappler; February 20th, 2018 at 07:56 AM.
AchyGrappler is offline   Reply With Quote


Old February 19th, 2018, 02:36 PM   #11
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Got the parts from Achy today. Everything exactly as described.
Now go get that flat track shoe and bust out some laps!

Thanks,

Timm
tgold is offline   Reply With Quote


Old February 19th, 2018, 02:57 PM   #12
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Thanks Timm, enjoy the parts and stickers. Hot shoe ordered today, just need to sell the remaining parts to pay for it!!
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 21st, 2018, 04:53 PM   #13
94droptop
ninjette.org member
 
Name: Cody
Location: Sacramento
Join Date: Jan 2018

Motorcycle(s): 2006 ex250

Posts: 26
So its pegs, brackets, clip ons, and extra bars for $25shipped. Im down if you still have them.
94droptop is offline   Reply With Quote


Old February 21st, 2018, 07:05 PM   #14
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Quote:
Originally Posted by 94droptop View Post
So its pegs, brackets, clip ons, and extra bars for $25shipped. Im down if you still have them.
PM'd
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 22nd, 2018, 03:54 PM   #15
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
I have updated the original post to reflect the items that are remaining based on what has been sold. The only remaining items are:

Cobra F1 Exhaust (make reasonable offer, shipping is ~$35 for these) - Pregen only, has new gaskets. You need to use your stock mounting clamps.
Pregen Brake Pads (make offer) - EBC HH Sintered new in the pack.
SSR Screw On Gas Cap (make offer) - Has a few dings, but worked well at the track.
13 Tooth Counter Shaft Sprocket (make offer) - If you have a small tight track or run your bike on kart tracks, this will help you pull off the corners with a bit more grunt. Fits newgen as well I believe.

If you want more than one item, I may make a deal.

You can check out my time with these parts at my blog at:http://http://mymotorbikeobsessions.blogspot.com

All parts will be cleaned and ready to install. Sorry for the inverted pictures, but the forum software is being stupid. Hit me up with a PM if interested.
Attached Images
File Type: jpg IMG_4432.jpg (79.3 KB, 2 views)
File Type: jpg IMG_4435.jpg (82.1 KB, 1 views)
File Type: jpg fullsizeoutput_853.jpg (107.4 KB, 2 views)
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Old February 25th, 2018, 08:46 PM   #16
AchyGrappler
Motorbike Obsessed
 
AchyGrappler's Avatar
 
Name: Me
Location: SoCal
Join Date: May 2015

Motorcycle(s): 2004 Kawasaki EX250, 2004 Yamaha FZ1, 2006 Honda CRF 450 Flat Track Race Bike

Posts: 133
Parts sold with bike.
__________________________________________________
My race Ninja build and more motorcycle content. My Motorbike Obsessions
AchyGrappler is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 Ninja 250R track / race parts iZapp Motorcycle-related 6 May 31st, 2014 05:11 PM
[roadracingworld.com] - Bike Night, Bikini Contest, Stunt Show, Track Laps And Track Ninjette Newsbot Motorcycling News 0 September 6th, 2013 01:20 PM
REAR SEAT LATCH!- Track bike leftover parts? Klondike1020 Items Wanted 2 August 9th, 2013 03:15 PM
98 parts bike bhalv Motorcycle-related 1 March 31st, 2011 09:51 AM
[topix.net] - The Racing Recipe: Two Parts Bike & Rider, Five Parts Perseverance Ninjette Newsbot Motorcycling News 0 October 7th, 2010 06:00 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 01:05 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.