China handle bar replacements

nadroj · August 11th, 2014, 09:03 AM

Anyone ever use these.

http://www.ebay.com/itm/CNC-Handle-B...ea0b2f&vxp=mtr

Need to replace at least one bar on my bike but am getting nowhere on ebay or anywhere else. People only seem to have bent bars.

Figured I could kill two birds with one stone on this, If I ever do need to replace a bar again it would be cheap.

garth285 · August 11th, 2014, 09:14 AM

I have been looking at something like that or like this:

http://www.ebay.com/itm/251564849787...84.m1423.l2649

I saw most people go with the ones that have the risers built in.... They are so cheap it might not be a bad thing to try out I'd maybe replace the hardware with some better stuff though!

LoneRonin · August 11th, 2014, 04:03 PM

if you only need the clip on bar itself those are cheap as hell...

A woodcraft or vortex one can be ordered from any shop for 10-15 bucks.

IF you're looking to go to clip ons from stock bars those will definitely have clearance issues. Once again your best bet is Woodcraft. Yea, it'll cost a bit more but you're getting a well designed, tried and tested product.

nadroj · August 12th, 2014, 04:51 AM

Quote:

Originally Posted by LoneRonin

if you only need the clip on bar itself those are cheap as hell...

A woodcraft or vortex one can be ordered from any shop for 10-15 bucks.

IF you're looking to go to clip ons from stock bars those will definitely have clearance issues. Once again your best bet is Woodcraft. Yea, it'll cost a bit more but you're getting a well designed, tried and tested product.

The stock bar doesn't come out of the riser does it?

LoneRonin · August 12th, 2014, 07:28 AM

nope.

psych0hans · August 12th, 2014, 07:38 AM

I actually have a set of these at home, not on my bike. They seem quiet solidly built and seem to have the stock height as well.

nadroj · August 14th, 2014, 09:02 AM

Quote:

Originally Posted by psych0hans

I actually have a set of these at home, not on my bike. They seem quiet solidly built and seem to have the stock height as well.

Interesting let us know if you ever install them. Like I said oem bars are hard to come by straight and a new OEM set cost 90$+

August 11th, 2014, 09:03 AM	#1
nadroj ninjette.org member Name: nadroj Location: 172.0.0.1 Join Date: Aug 2014 Motorcycle(s): zx6r ninjette a bunch of other ****** bikes Posts: 22	China handle bar replacements Anyone ever use these. http://www.ebay.com/itm/CNC-Handle-B...ea0b2f&vxp=mtr Need to replace at least one bar on my bike but am getting nowhere on ebay or anywhere else. People only seem to have bent bars. Figured I could kill two birds with one stone on this, If I ever do need to replace a bar again it would be cheap.

August 11th, 2014, 04:03 PM	#3
LoneRonin ninjette.org sage Name: Jason Location: Mississauga Join Date: Mar 2011 Motorcycle(s): 09 Ninja 250r Posts: 634	if you only need the clip on bar itself those are cheap as hell... A woodcraft or vortex one can be ordered from any shop for 10-15 bucks. IF you're looking to go to clip ons from stock bars those will definitely have clearance issues. Once again your best bet is Woodcraft. Yea, it'll cost a bit more but you're getting a well designed, tried and tested product. __________________________________________________ ”Any man dies with a clean sword, I’ll rape his f*ing corpse!”- The Hound

August 12th, 2014, 07:28 AM	#5
LoneRonin ninjette.org sage Name: Jason Location: Mississauga Join Date: Mar 2011 Motorcycle(s): 09 Ninja 250r Posts: 634	nope. __________________________________________________ ”Any man dies with a clean sword, I’ll rape his f*ing corpse!”- The Hound

August 12th, 2014, 07:38 AM	#6
psych0hans ninjette.org certified postwhore Name: Hansveer Location: Bombay, India Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.	I actually have a set of these at home, not on my bike. They seem quiet solidly built and seem to have the stock height as well. __________________________________________________ GETTING BACK INTO RIDING? Read this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Handle bar set up! Help..help...	cam_pty	2008 - 2012 Ninja 250R Tech Talk	4	June 21st, 2012 09:43 PM
Brand New Bar End Replacements Heavy	icbm	Motorcycle-related	3	May 13th, 2012 10:20 AM
Bar End Mirror for All 7/8" Inch Handle Bar?	FerociousNINJA	2008 - 2012 Ninja 250R Farkles	5	August 1st, 2011 09:44 PM
2005 left handle bar and screw and nut for clutch handle	gogiburn	Items Wanted	4	June 24th, 2010 01:17 AM

August 11th, 2014, 09:14 AM	#2
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	I have been looking at something like that or like this: http://www.ebay.com/itm/251564849787...84.m1423.l2649 I saw most people go with the ones that have the risers built in.... They are so cheap it might not be a bad thing to try out I'd maybe replace the hardware with some better stuff though!