ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old August 15th, 2011, 06:12 PM   #81
Bushmaster11B
Bushmaster11B
 
Bushmaster11B's Avatar
 
Name: Jason
Location: Ft Campbell
Join Date: Mar 2011

Motorcycle(s): 2009 Kawasaki Ninja 250R "Limited Edition" w/ Metallic, Pearl Essent, Candy Coat 3 Tone Paint Job

Posts: 181
Quote:
Originally Posted by Lvr View Post
@bushmaster: pics!! sounds like you ordered a lot more than I did, definitely wanna c what it all looks like when u install everything.
Could order just yet. Military screwed up my paycheck. Will post pics when I recieve order of installed parts.

@Waylan, gold alluminum mirrors? The ones you posted with those parts you was selling a month + ago? Can't find anything like those anywhere.
__________________________________________________
http://r9.fodey.com/2166/7fddc3a7c75...978e4f3c.0.gif
Bushmaster11B is offline   Reply With Quote




Old August 20th, 2011, 06:31 AM   #82
Newguy70
ninjette.org member
 
Newguy70's Avatar
 
Name: Jay
Location: Bangkok
Join Date: Jun 2010

Motorcycle(s): Ninja 250r

Posts: 47
Quote:
Originally Posted by Bushmaster11B View Post
So it's been about 2 months now, any problem with the integrity of the "Bikers" products you installed? How is the anidized Alum holding up?

Quick question, are those adjustable handlebars lighter or heavier than the OEM ones originally? Thanks

Also, why couldn't you tell us what you paid for them? Trying to run your own business or something? Just curious because I spend time in Asia myself and know that stuff is really really cheap. Like for example A haircut is normally $10-$16 here in the U.S. but a haircut in Asia, I know for a fact, is about $1-$5 depending on where you go. Just asking and just saying...

Levi, pretty much the same questions... Want to know how everything is and if you think it's worth it.
Hi,

Anodizing has held up to date; The levers are lighter than the OEM.

Everything is cheaper in Asia
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B
Newguy70 is offline   Reply With Quote


Old October 7th, 2011, 03:30 PM   #83
Outlander Systems
ninjette.org Tengu
 
Outlander Systems's Avatar
 
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011

Motorcycle(s): Kawasaki Ninja ZX6R

Posts: 256
The anodizing on this stuff is excellent. The quality of my MC cover was nice enough that I dropped over $1k with Webb!ke on stuff from Bikers.

That was over a month ago, and the idiots at the post office MAY have finally located it...

At any rate, they just released a boatload of stuff for the CBR250R.

http://www.bikers.co.th/accessories/...p=2&modelid=38

I can't stress the level of workmanship and quality of the MC cover I have. The anodizing looks like the day I installed it, and the attention to detail is awesome.

I will post up pics if the rest of my parts ever arrive.
__________________________________________________
Outlander Systems YouTube Channel

Outlander Systems Facebook Page
Outlander Systems is offline   Reply With Quote


Old October 7th, 2011, 09:22 PM   #84
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
good to hear you got your parts

i tried to email you several times when you asked me to check out prices for you, but you never replied, so i didnt know what happened with you.

looking forward to seeing some of those pics once you get them installed
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old October 7th, 2011, 09:29 PM   #85
CZroe
CPT Falcon
 
CZroe's Avatar
 
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009

Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F

Posts: A lot.
If they'd tone it down a bit, I'd love an exhaust hanger, an exhaust tip, and folding RIDER pegs. Unfortunately, they only make an exhaust tip and they don't make it in blue.
CZroe is offline   Reply With Quote


Old October 8th, 2011, 08:00 AM   #86
RedNinja21
ninjette.org member
 
RedNinja21's Avatar
 
Name: Jack
Location: NNJ
Join Date: Aug 2011

Motorcycle(s): Kawasaki Ninja 250R

Posts: 103
Hey Outlander, how did you get in contact with these guys? I tried emailing them a couple of times but got bounced back. From your post, they should still be in business. I'm loving their flamboyant products. Please let me know how I can order from them.

Newguy70, are you selling these products to the US? If you are, please send pricing sheet. Thanks.
__________________________________________________
RedNinja21 is offline   Reply With Quote


Old October 8th, 2011, 04:55 PM   #87
Outlander Systems
ninjette.org Tengu
 
Outlander Systems's Avatar
 
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011

Motorcycle(s): Kawasaki Ninja ZX6R

Posts: 256
Quote:
Originally Posted by wayanlam View Post
good to hear you got your parts

i tried to email you several times when you asked me to check out prices for you, but you never replied, so i didnt know what happened with you.

looking forward to seeing some of those pics once you get them installed
Thanks man. I have been having MASSIVE issues with my e-mail ever since I got my iPhone linked to it. I thought you'd given up on me!

I still need tons more Bikers stuff, so I will hit you up if you're still willing.

Quote:
Originally Posted by RedNinja21 View Post
Hey Outlander, how did you get in contact with these guys? I tried emailing them a couple of times but got bounced back. From your post, they should still be in business. I'm loving their flamboyant products. Please let me know how I can order from them.

Newguy70, are you selling these products to the US? If you are, please send pricing sheet. Thanks.
I e-mailed them. They sent a price list and a product list. The prices are in Thai, so you'll have to find an on-line conversion. I ordered mine through Webbike, because I had e-mail issues and thought Wayan bailed on me, and because I didn't want to mess with the wire-transfer from my bank account to Bikers directly. Be sure if you install any of their stuff, to make sure you use the gaskets/o-rings/etc. from your original OEM parts. I forgot to put the plunger/seal from the OEM brake reservoir on my new lid, and had brake fluid going everwhere. Not cool.

Here are the pics as promised. The quality of their stuff is awesome, to say the least.





I will upload better pics, probably tomorrow. I still need to install the rearsets and sprocket cover, and other odds 'n ends.
__________________________________________________
Outlander Systems YouTube Channel

Outlander Systems Facebook Page
Outlander Systems is offline   Reply With Quote


Old October 8th, 2011, 08:14 PM   #88
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
ow, email issues don't help much, xD strange though since i didn't get any error notifications... sneaky iFail-mail

i had your list all filled out with only a couple parts missing or something at the time, and i was asking you if you could confirm the list name/pictures, since i wasn't able to find the list with the item# or something. im not sure if it would be cheaper off for you to get it where you got the other parts at this point? i did send you a handful of prices, so you should be able to compare it, but you'd need to take into consideration that there is still the shipping cost as well from here, which isn't cheap.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old October 8th, 2011, 10:32 PM   #89
RedNinja21
ninjette.org member
 
RedNinja21's Avatar
 
Name: Jack
Location: NNJ
Join Date: Aug 2011

Motorcycle(s): Kawasaki Ninja 250R

Posts: 103
I guess I'll try to email them again. If it still gets bounce back, Outlander, can you help me to ask them to send me their pricing catalog?
__________________________________________________
RedNinja21 is offline   Reply With Quote


Old October 9th, 2011, 12:01 AM   #90
Newguy70
ninjette.org member
 
Newguy70's Avatar
 
Name: Jay
Location: Bangkok
Join Date: Jun 2010

Motorcycle(s): Ninja 250r

Posts: 47
Quote:
Originally Posted by RedNinja21 View Post
Hey Outlander, how did you get in contact with these guys? I tried emailing them a couple of times but got bounced back. From your post, they should still be in business. I'm loving their flamboyant products. Please let me know how I can order from them.

Newguy70, are you selling these products to the US? If you are, please send pricing sheet. Thanks.

Hi,

Sorry, I am not. To date not enough interest. I would however swap bike gear, for baby gear. Lots of quality Baby stuff not easy to find here. However this would involve you running to a Walmart, or Target on your end. If interested let me know, and i will get you pricing, shipping cost etc on the bikers gear you are interested in...
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B
Newguy70 is offline   Reply With Quote


Old October 9th, 2011, 06:34 AM   #91
Outlander Systems
ninjette.org Tengu
 
Outlander Systems's Avatar
 
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011

Motorcycle(s): Kawasaki Ninja ZX6R

Posts: 256
Quote:
Originally Posted by RedNinja21 View Post
I guess I'll try to email them again. If it still gets bounce back, Outlander, can you help me to ask them to send me their pricing catalog?
PM me with your email address and I will forward the .PDF of their price list to you.
__________________________________________________
Outlander Systems YouTube Channel

Outlander Systems Facebook Page
Outlander Systems is offline   Reply With Quote


Old October 10th, 2011, 12:54 PM   #92
RedNinja21
ninjette.org member
 
RedNinja21's Avatar
 
Name: Jack
Location: NNJ
Join Date: Aug 2011

Motorcycle(s): Kawasaki Ninja 250R

Posts: 103
PM'd Mike and Jay.
__________________________________________________
RedNinja21 is offline   Reply With Quote


Old October 16th, 2011, 12:09 AM   #93
Outlander Systems
ninjette.org Tengu
 
Outlander Systems's Avatar
 
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011

Motorcycle(s): Kawasaki Ninja ZX6R

Posts: 256
Installation video for Bikers rearsets.

Warning!

I cuss...a LOT!

Link to original page on YouTube.

__________________________________________________
Outlander Systems YouTube Channel

Outlander Systems Facebook Page
Outlander Systems is offline   Reply With Quote


Old October 16th, 2011, 05:39 AM   #94
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
you complain a lot... having the correct tools would have helped remove the sprocket cover with ease

at least you were happy with the outcome, woot!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old October 16th, 2011, 08:00 AM   #95
Outlander Systems
ninjette.org Tengu
 
Outlander Systems's Avatar
 
Name: Mike
Location: Atlanta, Georgia
Join Date: Jun 2011

Motorcycle(s): Kawasaki Ninja ZX6R

Posts: 256
Quote:
Originally Posted by wayanlam View Post
you complain a lot... having the correct tools would have helped remove the sprocket cover with ease

at least you were happy with the outcome, woot!
I was cranky because I had to do the install without beer!

The two things that made the sprocket cover a beast were:

Being a lazy bastid and leaving the fairings on

and

After taking the bolts off I had to damned near use a pry-bar and a welding torch to pull it off!

The Bikers products are nothing short of awesome! I love their stuff. I'm trying to figure out what other items they have that I really want. I want their rear stand but it is way, way too expensive. I definitely want their spools.
__________________________________________________
Outlander Systems YouTube Channel

Outlander Systems Facebook Page
Outlander Systems is offline   Reply With Quote


Old October 16th, 2011, 08:57 AM   #96
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
you cant show off their rear stand once ur out of your garage, so whats the point, haha...

but go for the rest~ just watched transformers... your bike might just look like one of those soon
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote


Old October 16th, 2011, 11:25 PM   #97
paulforaname
ninjette.org member
 
paulforaname's Avatar
 
Name: Paulie
Location: Melbourne, Australia
Join Date: Sep 2011

Motorcycle(s): Ninja 250R

Posts: 51
that is thai under the whats written in english on their website..
ie

NINJA 250
Adjustable Brake Lever ( with hole through the lever )
มือเบรคหน้าปรับระดับ ทะลุ
paulforaname is offline   Reply With Quote


Old January 15th, 2012, 08:35 PM   #98
loz944
ninjette.org guru
 
loz944's Avatar
 
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012

Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really)

Posts: 355
I am waiting for a reply from them now for a price list
I went past their show room not so long ago and that white ninja was in the window looked awesome if it works out cheaper to buy here and ship to the US or UK I will post it with prices. I will certainly be buying a lot from them as its not far from me about 40 mins

P.S My wife is Thai so she can negotiate better prices ..............if they see a white face they up the prices
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider

Last futzed with by loz944; January 15th, 2012 at 08:36 PM. Reason: forgot the ps
loz944 is offline   Reply With Quote


Old January 15th, 2012, 09:31 PM   #99
kevheads
ninjette.org guru
 
kevheads's Avatar
 
Name: Kevin
Location: central Illinois
Join Date: Apr 2011

Motorcycle(s): 2011 Green 250R

Posts: 346
What are these? Don't remember seeing these before on their site.
http://www.bikers.co.th/accessories/...3&storeid=1561
kevheads is offline   Reply With Quote


Old January 15th, 2012, 09:42 PM   #100
loz944
ninjette.org guru
 
loz944's Avatar
 
Name: Laurence
Location: Bangbuathong Thailand
Join Date: Jan 2012

Motorcycle(s): Green 2012 Ninja 250SE and a Yamaha fino scooter (my wife's really)

Posts: 355
Quote:
Originally Posted by kevheads View Post
What are these? Don't remember seeing these before on their site.
http://www.bikers.co.th/accessories/...3&storeid=1561
Licence plat holder
__________________________________________________
Be safe ride smart .....a dumb rider is a dead rider
loz944 is offline   Reply With Quote


Old April 1st, 2013, 09:57 PM   #101
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
Talking

:dIMG_0853.jpg

IMG_0855.jpg
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 12:21 AM   #102
Bentley813
ninjette.org member
 
Bentley813's Avatar
 
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012

Motorcycle(s): 2013 White 300

Posts: 221
Nice necro. Where did you order from? I'm salivating over their rearsets and the only place I can find it is from Webike.
Bentley813 is offline   Reply With Quote


Old April 2nd, 2013, 05:05 AM   #103
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
are you serious webbike?? major ripoff check this out

http://www.bikers.co.th/accessories/...14&colorid=427
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 05:14 AM   #104
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
i have an account with them if you want to get it thru me let me know
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 05:16 AM   #105
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
IMG_0846.jpg

IMG_0844.jpg

IMG_0843.jpg
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 05:20 AM   #106
Bentley813
ninjette.org member
 
Bentley813's Avatar
 
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012

Motorcycle(s): 2013 White 300

Posts: 221
You have an account through who?
Bentley813 is offline   Reply With Quote


Old April 2nd, 2013, 05:42 AM   #107
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
through jp morgan chase and their bank I do group buys for friends with different motorcycles not only here in the USA but in other countries let me show you how my motorcycle is gonna look soon
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 05:44 AM   #108
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
ninja250r-red-dna-massive-dynamics-1-640x431.jpg
like that but in gold
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 12:58 PM   #109
Instagib87
ninjette.org member
 
Name: Brandon
Location: Fort Walton Beach, Florida
Join Date: Apr 2013

Motorcycle(s): 08 Ninja 250

Posts: 10
A bit confused

I plan of buying a tricolor fairing kit from bliss star on ebay (black, white, and gold). Id like to add a bit of style with buying some of these parts... But I am lost between if I should be going through webbike or bikers.co.th?
Instagib87 is offline   Reply With Quote


Old April 2nd, 2013, 01:15 PM   #110
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
Always go with bikers.co.th webike is a rip off
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 01:25 PM   #111
Bentley813
ninjette.org member
 
Bentley813's Avatar
 
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012

Motorcycle(s): 2013 White 300

Posts: 221
Quote:
Originally Posted by gallardo73 View Post
are you serious webbike?? major ripoff check this out

http://www.bikers.co.th/accessories/...14&colorid=427
That is the one I was looking at actually, but there are no prices or links to buy on that site?
Bentley813 is offline   Reply With Quote


Old April 2nd, 2013, 02:29 PM   #112
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
Smile

Ok send me your email and i will send you
Their price list the only downside is that they
only accept bank transfers an most banks
charge up to $45.00 per international money
transfers.I have been ordering from bikers
From some time now and after few thousand
dollars spend already i am convinced that is
really worth it..
gallardo73 is offline   Reply With Quote


Old April 2nd, 2013, 04:22 PM   #113
Instagib87
ninjette.org member
 
Name: Brandon
Location: Fort Walton Beach, Florida
Join Date: Apr 2013

Motorcycle(s): 08 Ninja 250

Posts: 10
This is the fairing kit Ill get next paycheck. Its tri color and I was wondering what best colors do you think will go in which place (without it appearing that one color is all over)
Attached Images
File Type: jpg $(KGrHqN,!g0FBkSnwCwEBQjgWzuFQw~~60_12.JPG (74.3 KB, 2 views)
Instagib87 is offline   Reply With Quote


Old April 2nd, 2013, 04:40 PM   #114
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
I believe the silver would look nice on that
setup gold will be to much
gallardo73 is offline   Reply With Quote


Old April 4th, 2013, 12:06 PM   #115
Instagib87
ninjette.org member
 
Name: Brandon
Location: Fort Walton Beach, Florida
Join Date: Apr 2013

Motorcycle(s): 08 Ninja 250

Posts: 10
Gallardo73,

Instagib87@yahoo.com Send me the how to get this to my doorstep instructions.
Instagib87 is offline   Reply With Quote


Old April 11th, 2013, 04:34 AM   #116
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
IMG_0896.jpg

IMG_0895.jpg

IMG_0894.jpg

bling bling
gallardo73 is offline   Reply With Quote


Old April 18th, 2013, 04:40 AM   #117
gallardo73
ninjette.org guru
 
Name: paul
Location: yonkers,new york
Join Date: Aug 2012

Motorcycle(s): 2012 kawasaki ninja 250r special edition

Posts: 255
Talking

and this alsoIMG_0902.jpg

IMG_0903.jpg
gallardo73 is offline   Reply With Quote


Old April 18th, 2013, 08:40 AM   #118
Instagib87
ninjette.org member
 
Name: Brandon
Location: Fort Walton Beach, Florida
Join Date: Apr 2013

Motorcycle(s): 08 Ninja 250

Posts: 10
Looking nice
Instagib87 is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Thailand's 'Bikers' review Lvr 2008 - 2012 Ninja 250R Farkles 18 March 26th, 2016 12:08 PM
Bikers Farkles from Thailand at a cheaper price loz944 Motorcycle-related 100 March 16th, 2016 05:06 PM
Bikers Farkles from Thailand at a cheaper price loz944 2008 - 2012 Ninja 250R Farkles 8 January 22nd, 2012 10:24 AM
New from Thailand Somchai New Members 13 June 23rd, 2011 11:34 AM
[topix.net] - Eugene bikers love their Harley's and so do other bikers who... Ninjette Newsbot Motorcycling News 0 May 22nd, 2010 07:40 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:04 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.