2013 Ninja 300 Fully Tracked and Street So Cal

JBinSD · September 25th, 2015, 11:37 AM

Hey all:
Haven't been on this forum in a bit, but I'm bailing from racing and selling my Ninja 300. Clean title, less than 3050 miles. Its got:
1. Bazzaz race Tune;
2. Moption Pro Throttle
3. Full Yoshi system;
3. Elka custom rear shock (sprung for 200 lb rider)
4. Catalyst composite bodywork
5. Almost two sets of street plastics, (they may not be totally complete, I acquired them from Kawi as the prototype bike).

I probably have about $10k into it, clean titleAsking $4800 obo

Call Joel 760 815 92 oh oh.

Thanks.

ninja-turtle · October 8th, 2015, 12:44 PM

how did you like your setup? I just picked up a 300 and immediately ordered all the parts. They should be coming in this Friday but I can't wait any longer!

Ohlins rear
Andreani Fork Cartridges
Sharkskinz
Stainless lines
Full Carbon Yoshi
GB Case covers
Woodcraft frame slider
Woodcraft clip on
Motion Pro Throttle
Lever Guards
Vortex Rear Sets

I'm excited to see how much of a different these front cartridges will make. Although I've only ridden the 300 once on the street and never on the track. My plans are to put my track 636 in hibernation for a bit and ride the 300 all of next season. We'll see how it goes.

Which Pirellis do you have? I run SC on my 636 but I hear folks tend to run the SP on the 300? How do you like them?
It also looks like you've got some suspension goodies up front. What are you got in them and how much of a difference did it make?

JBinSD · October 8th, 2015, 09:45 PM

Thanks, Bike is. SOLD. The front end could have used a bit more stffness, but otherwise loved everything about it. . .

September 25th, 2015, 11:37 AM	#1
JBinSD ninjette.org guru Name: Joel Location: Sandy Eggo north Join Date: Aug 2012 Motorcycle(s): '13 Ninja 300, '99 SV650 tracked Posts: 378	2013 Ninja 300 Fully Tracked and Street So Cal Hey all: Haven't been on this forum in a bit, but I'm bailing from racing and selling my Ninja 300. Clean title, less than 3050 miles. Its got: 1. Bazzaz race Tune; 2. Moption Pro Throttle 3. Full Yoshi system; 3. Elka custom rear shock (sprung for 200 lb rider) 4. Catalyst composite bodywork 5. Almost two sets of street plastics, (they may not be totally complete, I acquired them from Kawi as the prototype bike). I probably have about $10k into it, clean titleAsking $4800 obo Call Joel 760 815 92 oh oh. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[sportrider - latest stories] - 2011 Yamaha FZ8 - Fully Capable, Just Not Fully Dress	Ninjette Newsbot	Motorcycling News	0	April 19th, 2011 02:50 PM

October 8th, 2015, 12:44 PM	#2
ninja-turtle ninjette.org member Name: El Jefe Location: .... Join Date: Oct 2015 Motorcycle(s): Kawasaki 636 Posts: 66	how did you like your setup? I just picked up a 300 and immediately ordered all the parts. They should be coming in this Friday but I can't wait any longer! Ohlins rear Andreani Fork Cartridges Sharkskinz Stainless lines Full Carbon Yoshi GB Case covers Woodcraft frame slider Woodcraft clip on Motion Pro Throttle Lever Guards Vortex Rear Sets I'm excited to see how much of a different these front cartridges will make. Although I've only ridden the 300 once on the street and never on the track. My plans are to put my track 636 in hibernation for a bit and ride the 300 all of next season. We'll see how it goes. Which Pirellis do you have? I run SC on my 636 but I hear folks tend to run the SP on the 300? How do you like them? It also looks like you've got some suspension goodies up front. What are you got in them and how much of a difference did it make?

October 8th, 2015, 09:45 PM	#3
JBinSD ninjette.org guru Name: Joel Location: Sandy Eggo north Join Date: Aug 2012 Motorcycle(s): '13 Ninja 300, '99 SV650 tracked Posts: 378	Thanks, Bike is. SOLD. The front end could have used a bit more stffness, but otherwise loved everything about it. . .