March 3rd, 2011, 08:36 AM | #1 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
new accessories from Bikers in Thailand
|
|
March 3rd, 2011, 08:51 AM | #2 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
Thailand? Why does it have Japanese characters then?
But man, those are looking sweet for those looking to dress up their bikes. |
|
March 3rd, 2011, 08:52 AM | #3 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
here's their site:
http://www.bikers.co.th/ 250r specific page: http://www.bikers.co.th/accessories/...p=2&modelid=29 |
|
March 3rd, 2011, 08:58 AM | #4 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
I gotta admit, it looks pretty bad ass. I feel if I install all that on my bike it would take a life on its own and transform. LOL!
|
|
March 3rd, 2011, 09:08 AM | #5 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
I was told that the company is ligit (has showroom and all). But again, I just got a$$-raped by Shito Paul Kirk (probably ex-communicated from England by the Queen) and it still numb down there so I'm a little weiry about out of the country stuffs.
|
|
March 3rd, 2011, 09:25 AM | #6 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
Products look nice, but expensive I bet.
|
|
March 3rd, 2011, 10:01 AM | #7 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
nice to have another option for our bikes. i'm not big on the styling though, like nemesis said, looks too "transformerish".
|
|
March 3rd, 2011, 10:28 AM | #8 |
ninjette.org certified postwhore
Name: Cody
Location: NoVa
Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.
|
By the time you install all of it you'd probably be ready for a 600cc bike, just hope it transforms into that and not a moped.
__________________________________________________
|
|
March 3rd, 2011, 07:41 PM | #9 |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Some pretty cool stuff... didn't look to in depth but didn't see prices.
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
March 3rd, 2011, 08:38 PM | #10 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
nice bling bling stuff... and yeah, all of those addons gives the bike a really "transformer" like look.
there are definitely several things that i would like to have
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
March 3rd, 2011, 09:31 PM | #11 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
I really only want the exhaust tip.
Quote:
|
|
|
March 3rd, 2011, 11:21 PM | #12 | |
ninjaholic
Name: Dustin
Location: Oceanside, CA
Join Date: Jun 2010 Motorcycle(s): 09' SE 250R (sold), 03' ZX-6R, 99' XL1200C SP Posts: A lot.
Blog Entries: 3
|
Thats because they are still building their website... lots of the links say coming soon if you back out to the home page and go into the different sections you'll see what I mean.
Quote:
__________________________________________________
09' SE Ninja 250R $2,547.83 worth of mods installed... come on Unregistered, you know you want to know what? Check my Blog "Modification List" |
|
|
March 4th, 2011, 07:34 PM | #13 |
ninjette.org member
Name: Jay
Location: Bangkok
Join Date: Jun 2010 Motorcycle(s): Ninja 250r Posts: 47
|
No one here (in Thailand) is in a rush to build any website as they have plenty of customers. This is the land of Pimp your bike, take it from someone who lives here.
If anyone is looking to do a little business, let me know. By the way I am not English
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B |
|
March 7th, 2011, 01:42 AM | #14 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
hey, my girlfriend is English, stop rubbing in the bad experience from one onto all! haha
they aren't all bad
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
March 14th, 2011, 07:53 PM | #15 |
ninjette.org newbie
Name: Weber
Location: Australia
Join Date: Mar 2011 Motorcycle(s): None yet Posts: 3
|
...I...want...everything...
|
|
March 14th, 2011, 09:29 PM | #16 |
ninjette.org sage
Name: Cab
Location: Miami Beach
Join Date: Mar 2010 Motorcycle(s): Blue 10 250r Posts: 697
|
too blingie for me, sorry......
|
|
March 18th, 2011, 07:22 AM | #17 |
meow?
Name: kevin
Location: I.E. SoCal
Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587
|
definitely a cool transformer look
i just wonder how much weight it gain with all that bling anyone know if they are open for the US market? |
|
March 18th, 2011, 10:05 AM | #18 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
Damn, that's some sexy stuff. Do we have anyone on the forum who might know/be able to find prices for any of it? I'd be interested in a few things...
|
|
March 19th, 2011, 01:42 AM | #19 | |
meow?
Name: kevin
Location: I.E. SoCal
Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587
|
emailed them about prices and they sent me their price catalog
Quote:
|
|
|
March 19th, 2011, 04:02 AM | #20 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
Great, thanks for posting that!
|
|
March 19th, 2011, 08:03 AM | #21 |
ninjette.org guru
Name: war
Location: north chicago burbs
Join Date: Jan 2011 Motorcycle(s): 2014 Ducati Panigale 899 Posts: 325
|
They have this stuff on ebay now.
If you figure out what they're selling it for according to their pricing list and the current exchange rate, they're asking way more than what they'd want for the same item in Thailand; plus shipping. |
|
March 19th, 2011, 09:10 AM | #22 | |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
Quote:
I know what you mean about the pricing thing though. I think Club517 does the same thing with their parts on ebay vs. on their website. |
|
|
March 19th, 2011, 09:33 AM | #23 | |
meow?
Name: kevin
Location: I.E. SoCal
Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587
|
Quote:
im the guy that posted the thread over there but as i wrote over there the guys on ebay are resellers, so they priced it higher to make profit type in "bikers 250r" |
|
|
March 19th, 2011, 09:59 AM | #24 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
yup, there they are. thanks for the tip. They were hard to find; "bikers" gets a lot of hits lol.
|
|
March 19th, 2011, 10:31 AM | #25 |
ninjette.org guru
Name: war
Location: north chicago burbs
Join Date: Jan 2011 Motorcycle(s): 2014 Ducati Panigale 899 Posts: 325
|
|
|
March 20th, 2011, 02:18 PM | #26 |
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
|
|
March 20th, 2011, 06:07 PM | #27 |
User Title Free Since '12
Name: Floyd
Location: Barbados
Join Date: Dec 2010 Motorcycle(s): '10 Ninja 250R Special Edition Green Posts: A lot.
Blog Entries: 13
MOTM - Feb '12
|
I'm embarassed to say the master cylinder cover looks pretty cool. Still fairly limited offerings on ebay, though.
__________________________________________________
"Improvement makes straight roads, but the crooked roads without improvement, are roads of genius." — William Blake |
|
March 22nd, 2011, 05:43 PM | #28 |
ninjette.org sage
Name: john
Location: Palm Beach County, Fl Sligo County, Eire
Join Date: Dec 2010 Motorcycle(s): 2005 ninja 250 street fighter, 2008 street fighter ninja 500, 2001 nsr 125 Posts: 812
|
can't say that, use Goddamnit, that's o. k.
|
|
March 30th, 2011, 06:27 PM | #29 |
ninjette.org newbie
Name: jack
Location: worcester
Join Date: Dec 2010 Motorcycle(s): 2009 ninja 250 Posts: 7
|
how do i order part from the website bikers something?
|
|
March 31st, 2011, 08:10 AM | #30 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
Just send them an email. I'm actually in the process of ordering from them now; they just shipped my items. Had some headaches sending the money (my banks fault, not theirs), but all in all, I definitely recommend them so far. Excellent customer service, very patient and friendly folks. I'll probably make a thread about it once I get my parts.
|
|
April 1st, 2011, 09:04 AM | #31 |
ninjette.org guru
Name: Darrell
Location: Brandon, FL
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R Posts: 330
|
reminds me of some kind of transformer lol
__________________________________________________
09 White - Custom Carbon Fiber Undertail Exhaust w/ License Plate Bracket - K&N R-0990 - Driven 15t - DynoJet 106 Main Jets- Custom Flush Mounts - HID 5k - |
|
April 3rd, 2011, 11:31 PM | #32 |
ninjette.org member
Name: Jay
Location: Bangkok
Join Date: Jun 2010 Motorcycle(s): Ninja 250r Posts: 47
|
Levers & Bar Ends
Hi Guys,
So I was curious to see what this shop had, as I am here in Thailand. I kept the purchase simple as I want to see how the anodizing holds up under the heat/sun/rain. Here are a few pics, these were installed on March 27th,2011.
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B |
|
April 4th, 2011, 12:06 AM | #33 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
looks good!
how much is it in USD? just curious, the adjustable foldable ones from the2wheels cost like $70 including shipping, which sounds like a good price. just curious to compare with others out there
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 4th, 2011, 01:07 AM | #34 | |
ninjette.org member
Name: Jay
Location: Bangkok
Join Date: Jun 2010 Motorcycle(s): Ninja 250r Posts: 47
|
Parts
Quote:
I am unable to comment on pricing. However, I do understand that they have them available on EBAY @ 89.00 U.S. for customer outside of Thailand. I am not able to comment on the levers from the2wheels as I have never seen, nor tried them on a Ninja 250R. At the end of the day as long as you are happy with the price, then it's a good price However, If you are interested. I could source at a better price. I will not due any group buys,period. Please keep in mind, that the company "Bikers" that you have interest in is new. I am not sure how the anodizing will hold up, and suggest maybe waiting a month to see if I encounter any problems with the product that I have noted below re anodizing. I take my bike out every day, so under the elements here in Thailand we will see if the product is worthy or not. I have seen anodized bike parts sold here in Thailand, fade very quickly if they were made by cheap charlie, so I hope that helps. re: Anondizing (When there is no specification, the least expensive option is usually used, and in a few years the finish is pitted, stained, and eroded. Another important determinant of coating life is its density. The denser the coating, the longer it will last.) ref:http://www.anodizing.org/Publications/architect.html If you do not want to wait, just let me know. I have included a few more pics for you.
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B |
|
|
April 4th, 2011, 01:28 AM | #35 |
ninjette.org certified postwhore
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.
|
i dont need any, i just bought mine from the2wheels, i was just curious to compare them, price wise.
i have a friend who lives in thailand who could also help me get stuff from there and sent it over to Bali. my mom also goes through thailand quite often when she travels, so in theory geting something from them wouldnt be an issue. alternatively i can also ask you most of the things that ive seen on their website and like i can actually find some similar stuff here in indonesia already. however its always cool to see new products/manufacturers for our bikes!
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield |
|
April 4th, 2011, 01:42 AM | #36 |
ninjette.org member
Name: Jay
Location: Bangkok
Join Date: Jun 2010 Motorcycle(s): Ninja 250r Posts: 47
|
I just replaced my levers due to bad anodizing, a different company other than the one mentioned.
New manufacturers is always a good thing! +1 If you are ever in Bangkok drop me a line. We hit the local track every 2 weeks, and if you are not up for the track we could always make a run up North through the mountains.
__________________________________________________
YoshiTRCarbonMuffler w/R&GSlider,Hel Brake Lines,RizomaTurnSignals,517RearSet,517Engine Sliders,BikersBarEnds&levers,518LimeWindscreen,Powerlet,Ram,B |
|
April 6th, 2011, 09:29 PM | #37 |
ninjette.org sage
Name: Peanut
Location: Senoia, GA
Join Date: Feb 2011 Motorcycle(s): Green 2013 ZX-6R Posts: 723
|
And i'll form the head!!!!!
__________________________________________________
http://www.simplysurrealphotography....es/peanut2.png |
|
April 7th, 2011, 10:49 PM | #38 |
ninjette.org newbie
Name: Matt
Location: Australia
Join Date: Apr 2011 Motorcycle(s): 09 Ninja 250R Posts: 4
|
Wow these look pretty nice and vey different. Gonna need to get some rearsets, clipons and levers in the next week or so, so I'm definitely interested in how you're finding these.
Plus looking like a transformer is never a bad thing. |
|
April 8th, 2011, 03:46 AM | #39 |
ninjette.org member
Name: Levi
Location: Ny
Join Date: Oct 2010 Motorcycle(s): Ninja 250 Posts: 136
|
I received my order a few days ago and installed everything, and I couldn't be happier with it. The quality seems excellent, everything is machined to fit perfectly. Plus there are little things they do, like I ordered their chain guard, and it comes with two new allen head bolts to mount it, even though it would work with the stock bolts.
The only difficulties I had were because of my bank, because Bikers only accepts direct bank transfer for payment. |
|
April 15th, 2011, 05:16 AM | #40 |
Ninjette CPT
Name: Vince
Location: jacksonville, fl
Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.
|
fyi, their items are now available through:
japan.webike.net |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thailand's 'Bikers' review | Lvr | 2008 - 2012 Ninja 250R Farkles | 18 | March 26th, 2016 12:08 PM |
Bikers Farkles from Thailand at a cheaper price | loz944 | Motorcycle-related | 100 | March 16th, 2016 05:06 PM |
Bikers Farkles from Thailand at a cheaper price | loz944 | 2008 - 2012 Ninja 250R Farkles | 8 | January 22nd, 2012 10:24 AM |
New from Thailand | Somchai | New Members | 13 | June 23rd, 2011 11:34 AM |
[topix.net] - Eugene bikers love their Harley's and so do other bikers who... | Ninjette Newsbot | Motorcycling News | 0 | May 22nd, 2010 07:40 PM |
|
|