July 14th, 2018, 02:49 PM | #1 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Ninja 300 rearsets fit on pregen!!
So I was clearing out garage by tossing extras laying around. I’d put newest parts on bikes and toss old stuff. Had set of factory Ninja 300 rearsets laying around, figured I’d replace oldest parts with them. That would be 2002 pre-gen street bike!!!
What’d ya know, they fit!! On right side, 3rd mounting point above brake-master was non-issue, it just doesn’t get used. I’m sure there’s tonnes of factory Ninja 300 rearsets in boxes at rear of people’s garages just dying to be used! Gives pregen more modern look! |
|
July 22nd, 2018, 02:31 PM | #2 |
ninjette.org member
Name: Steven
Location: Central Valley CA
Join Date: Feb 2018 Motorcycle(s): 2007 Ninja 250 Posts: 35
|
Does this provide any riding advantage or just looks?
Also this would mean that aftermarket rearsets also would fit the pregen, right? |
|
July 22nd, 2018, 04:27 PM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Just looks on pregen. I've noticed that kickstand on one side and exhaust-pipe on other will touch down before pegs would (without feelers).
Although I prefer my feet a little further back, about 4" more. So yes, aftermarket 300 rearsets would fit on pregen 250! |
|
January 24th, 2019, 07:57 PM | #4 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Great information! I'll have to see if I can locate a set for myself.
__________________________________________________
... can't stop updating the bike! |
|
March 5th, 2019, 08:07 PM | #5 |
ninjette.org member
Name: Dave
Location: Pittsburgh
Join Date: Jan 2019 Motorcycle(s): Honda cx650, 2005 ninja 250 Posts: 45
|
The po did this upgrade on my bike. Didn’t even know until I saw your thread
|
|
March 5th, 2019, 11:26 PM | #6 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Yeah!
|
|
March 6th, 2019, 07:32 AM | #7 |
ninjette.org guru
Name: Hector
Location: SoCal
Join Date: Sep 2018 Motorcycle(s): 2007 Ninja 250 Posts: 272
|
I've been considering this little upgrade but also tossing around the idea of going with the Chinese sporty rearsets they make for the 250/300.
__________________________________________________
When you see me, it's already too late. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NewGen rearsets on PreGen offerings | lolibater | 1986 - 2007 Ninja 250R Tech Talk | 34 | September 29th, 2012 09:45 AM |
Newgen rearsets on a pregen, initial impressions/complications... | Verus Cidere | 1986 - 2007 Ninja 250R Farkles | 9 | May 2nd, 2010 01:56 PM |
250r Rearsets on the pregen? | iceman.kcmo | 1986 - 2007 Ninja 250R Farkles | 7 | January 20th, 2010 12:45 AM |
Thread Tools | |
|
|