|
March 22nd, 2011, 08:46 PM
|
#1 |
|
two ninjas, no regrets.
Name: Dane
Location: Toronto, Ontario
Join Date: Nov 2010 Motorcycle(s): RED 2009 Kawasaki Ninja 250R... Special Edition 2009 Kawasaki Ninja 250R Posts: 23
|
Turn signal problem!!!
okay so i just installed Proton flushmount turn signals and a hotbodies undertail and both use LED lights so i upraded my relay to a Tridon LL552 Long Life Electronic Flasher and they still stay on and dont flash. the other issue is the protons dont turn on or flash AT ALL when my Koso rx2 guage is plugged into all the harnesses. any ideas? do i put back in the stock relay and buy 8ohm resistors? is my new flasher defective? does the flasher relay have a hard time handling 4 LED turn signals? why does this happen when my koso is installed? lol
weirder problem, sometimes the protons flash with the koso rx2 plugged in but only when i rev the bike? HELP! 
|
|
|
|
March 23rd, 2011, 07:25 AM
|
#2 |
|
Long Time Rider
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.
|
You may have too many LEDS for the flasher to handle. I believe this will solve your problem. http://www.superbrightleds.com/cgi-b...F12ANL-01.html
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Turn Signal indicator problem! | Kevin2109 | 2008 - 2012 Ninja 250R Tech Talk | 12 | March 22nd, 2014 09:17 PM |
| Turn signal problem | ChickenRun | 2008 - 2012 Ninja 250R Tech Talk | 11 | June 9th, 2013 05:44 PM |
| Turn signal problem | kawasaki-guy2008 | 2008 - 2012 Ninja 250R Tech Talk | 4 | June 4th, 2013 09:07 AM |
| Turn signal problem | PistolPete93 | 2008 - 2012 Ninja 250R Tech Talk | 19 | July 17th, 2012 10:54 AM |
| Turn Signal Problem | shawn57187 | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 17th, 2011 02:13 PM |
|
|
