December 3rd, 2017, 01:14 PM | #1 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
Bike won't crank - New battery
I just got a ninja 250 that had Ben setting for awhile I got a new battery poot it in the nutrol, oil and the middle tale light come on but when i het the ignishen switch nothing happeneds
|
|
December 3rd, 2017, 01:42 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hi and welcome Thomas!
Do you have- - FSM - field service manual with electrical wiring diagram? - multimeter? Please review this thread: https://www.ninjette.org/forums/showthread.php?t=307592 |
|
December 3rd, 2017, 02:13 PM | #3 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
That was help full I'm about to go over to my papas to work on the bike I'm shore I'll have more questions this is my first bike
|
|
December 4th, 2017, 01:28 AM | #4 | |
ninjette.org member
Name: Nick
Location: USA
Join Date: Apr 2016 Motorcycle(s): 2009 Ninja 250r Posts: 109
|
This happened to me a while back:
https://www.ninjette.org/forums/showthread.php?t=300192 It ended up being a loose electrical connection (plug) under the gas tank, on the right side of the bike. From @Flying: Quote:
|
|
1 out of 1 members found this post helpful. |
December 5th, 2017, 06:44 PM | #5 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
It was the starter solenoid but I found out that the carbarater is mixing my gas in to my oil so I have to Chang the oil be for starting it but I was grad to finally here she make a sound
|
|
December 5th, 2017, 06:47 PM | #6 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
It's like the coper pen is not going all the way down is what the guy that I bought it from told me was one of the issues
|
|
December 5th, 2017, 06:50 PM | #7 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
That leank you poor in there is not working
|
|
December 5th, 2017, 09:01 PM | #8 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
December 6th, 2017, 01:55 PM | #10 |
Certified looney toon
Name: Teri
Location: 39°52'40.7"N 118°23'53.8"W (Northern NV)
Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot.
Blog Entries: 16
MOTM Jul '13, Jul '14
|
Hewwo!
__________________________________________________
<-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow. |
|
December 9th, 2017, 12:00 AM | #11 |
Ranger tom
Name: Thomas
Location: Oklahoma city
Join Date: Dec 2017 Motorcycle(s): Ninja Gpx 250 Posts: 6
|
Well I have a 1988 gpx ninja 250 so will the wirking be the same as a 2008 ninja 250 shown on the diagram
|
|
December 9th, 2017, 04:20 AM | #12 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
https://faq.ninja250.org/wiki/Starter_circuit_schematic 1. Note that there's 4 switches that must be set properly for START button to work. - Ignition-switch = ON sending power out - Engine Start/Stop = ON - Neutral-switch = ON or... - Clutch-switch = IN (squeeze lever) 2. There should be +12v power on red wire going into START button 3. There should be continuity/zero-resistance to chassis-ground on yellow/green wire at starter-relay coil ONLY when ALL these switches and conditions are set properly will START button activate starter-relay which activates starter-solenoid which sends power to starter. |
|
|
January 5th, 2018, 04:32 PM | #13 |
NinjaBraap
Name: Tom
Location: Long Beach, California
Join Date: Dec 2016 Motorcycle(s): 06 Ninja 636, 2016 Yamaha R3 (Street/Track), 2019 Ninja 400 Project Racebike Posts: 175
Blog Entries: 2
|
Fuel mixing into oil huh? Been sitting a while, likely piston rings are, or were seized.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bike won't crank, lights come one, replaced battery and solenoid starter. | iforgot | 2008 - 2012 Ninja 250R Tech Talk | 4 | November 21st, 2015 12:35 PM |
Starting issues, Ninja 2010 won't crank | BlueDragon | 2008 - 2012 Ninja 250R Tech Talk | 6 | March 12th, 2015 02:49 PM |
Another bike will crank but won't start thread... | remix919 | 2008 - 2012 Ninja 250R Tech Talk | 10 | May 12th, 2014 01:05 PM |
bike won't crank!! | LoneRonin | 2008 - 2012 Ninja 250R Tech Talk | 14 | September 5th, 2011 04:19 PM |
New battery, still won't start | frankfong | 1986 - 2007 Ninja 250R Tech Talk | 9 | January 12th, 2011 10:08 AM |
|
|