ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old January 12th, 2019, 01:37 PM   #1
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
California Naked Fighter

A few months back I bought a stock 2007 non-runner with the intention of making it my project bike. The bike is now running and maintenance has been done, many thanks to board members help on the tech forum. Originally I was going to go the cafe route but it looks like it will most likely fall between the category of naked and street fighter, hence the name.

This is my first post in which I'll be documenting the progress of my project. I will avoid reaching out for help here (i'll post separately on the tech board) so I can focus on completed modifications and installations. Wish me luck!

Here are the "before" photos after I got it home:
Attached Images
File Type: jpg right.JPG (206.2 KB, 5 views)
File Type: jpg left.JPG (212.3 KB, 3 views)
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote




Old January 12th, 2019, 02:02 PM   #2
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Coilpack conversion

Since the bike will be pretty much naked I decided to ditch the ignition coils and mounting brackets for a cleaner look. I paid $28 for a pair of used coil packs and $9.95 for the wiring harness on Ebay.

It was a pretty simple swap, just involved a little soldering for the wiring and had to drill out the spot weld for the mounting bracket. After that I just cleaned up the metal that used to be covered up by the mounting bracket sprayed and it with gloss black spray paint.

1st official mod completed!
Attached Images
File Type: jpg coil-before.jpg (74.4 KB, 11 views)
File Type: jpg coil-after.jpg (75.5 KB, 13 views)
__________________________________________________
When you see me, it's already too late.

Last futzed with by dodgerdad; January 12th, 2019 at 09:47 PM. Reason: typo
dodgerdad is offline   Reply With Quote


Old January 12th, 2019, 04:46 PM   #3
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Good looking bike!
Snake is offline   Reply With Quote


Old February 26th, 2019, 07:32 PM   #4
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Naked-er

I've been spending some time on cleaning up the body lately, almost done. Only thing left to trim will be the front portion of the rear fender then I'll move on to the rear frame section.

Here's an update with photos:
-covered up the tank screw holes
-trimmed the front fender
-removed back portion of rear fender
-removed rear seat latch assembly
-trimmed side covers/fairings
-trimmed saddle (will clean it up more once the tail light & seat fabric arrive)

Don't mind the zip tie & Home Depot'd lighting mounts I'm trying to keep it street legal throughout the process even if it's a little scary looking

Next on the list will be fitting the tail light, fastening down the saddle, and cutting the rear frame section. Oh and putting some plastic goods up for sale to aid the continued economic burden

On a side note, I've become rather eager to weigh this thing once I'm done. All the stuff I've removed from the bike seems to be adding up much more than I would have expected.
Attached Images
File Type: jpg DSC_0855.jpg (86.0 KB, 15 views)
File Type: jpg DSC_0856.jpg (72.6 KB, 6 views)
File Type: jpg DSC_0858.jpg (87.1 KB, 4 views)
File Type: jpg DSC_0859.jpg (63.0 KB, 6 views)
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote


Old March 25th, 2019, 02:26 PM   #5
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Saddle up!

After an embarrassingly sticky, failed attempt at re-covering my saddle I swallowed my pride and dropped it off at a professional upholstery shop.

It actually looks like a real (small) saddle now that the foam isn't visible at the rear!
Attached Images
File Type: jpg DSC_0934.jpg (115.2 KB, 1 views)
File Type: jpg DSC_0935.jpg (84.9 KB, 1 views)
__________________________________________________
When you see me, it's already too late.

Last futzed with by dodgerdad; March 25th, 2019 at 02:27 PM. Reason: typo
dodgerdad is offline   Reply With Quote


Old March 25th, 2019, 06:05 PM   #6
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Coming along very nicely!!!
DannoXYZ is offline   Reply With Quote


Old March 25th, 2019, 06:59 PM   #7
Raddad70
ninjette.org member
 
Name: Dave
Location: Pittsburgh
Join Date: Jan 2019

Motorcycle(s): Honda cx650, 2005 ninja 250

Posts: 39
Smile

Seat looks great! I will be upholstering my seat soon also a custom job. If you donít mind me asking what did it cost
Raddad70 is offline   Reply With Quote


Old March 26th, 2019, 06:08 AM   #8
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Quote:
Originally Posted by Raddad70 View Post
Seat looks great! I will be upholstering my seat soon also a custom job. If you donít mind me asking what did it cost
I paid $70 at a small local shop. Seemed a bit high but I was too lazy to shop it around.
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote


Old April 8th, 2019, 07:50 PM   #9
Milpool
ninjette.org member
 
Name: Nathan
Location: Brisbane, Australia
Join Date: Apr 2019

Motorcycle(s): GPX250r (pregen Ninja 250)

Posts: 13
Will be good to see it finished! I love how these bikes look all streetfighterised.
Milpool is offline   Reply With Quote


Old June 10th, 2019, 02:13 PM   #10
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Swingarm & exhaust

I stripped the swingarm then primed it with etching primer. After that it was black wheel paint followed by a wheel clear coat. I've finished up the exhaust so I decided to take it for a short ride this weekend before I wrap it.

The exhaust held up well but turned out much louder than I prefer so earplugs will be in order for future rides.

Next up will be ordering tires so that I can swap out my wheels with the black ones I have standing by. I plan to wrap the exhaust while I wait for my tires & have them mounted to the black wheels.

(Couldn't figure out how to rotate my photo )
Attached Images
File Type: jpg DSC_1152.jpg (111.0 KB, 10 views)
File Type: jpg DSC_1110.jpg (66.2 KB, 3 views)
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote


Old June 10th, 2019, 07:16 PM   #11
Ceeloo Yello
ninjette.org member
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 191
Quote:
Originally Posted by dodgerdad View Post
I stripped the swingarm then primed it with etching primer. After that it was black wheel paint followed by a wheel clear coat. I've finished up the exhaust so I decided to take it for a short ride this weekend before I wrap it.

The exhaust held up well but turned out much louder than I prefer so earplugs will be in order for future rides.

Next up will be ordering tires so that I can swap out my wheels with the black ones I have standing by. I plan to wrap the exhaust while I wait for my tires & have them mounted to the black wheels.

(Couldn't figure out how to rotate my photo )
Top notch work so far
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old June 21st, 2019, 03:20 PM   #12
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Wheelin'

I received my new tires in the mail, I bought the Shinko SR741 & SR740. This week I had the new tires mounted to my new-to-me black wheels (it had silver ones before) and swapped over the rotors. I hadn't planned on messing with the cush drive but I found the slop was ridiculous. I couldn't ignore it so I sacrificed one of my wife's tuperware lids and when to work. Turned out to be very easy work and now zero play.

I plan to scrub in the tires on some local canyon roads tomorrow. I'm very curious to see if I actually notice a difference now that I snugged up the cush drive.

Next up will be silicone spraying the exhaust wrap and then doing something about those unsightly rearsets.
Attached Images
File Type: jpg DSC_1188.jpg (102.3 KB, 5 views)
File Type: jpg DSC_1191.jpg (108.5 KB, 8 views)
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote


Old June 21st, 2019, 09:26 PM   #13
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
I got those tyres on my street newgen. Really works well!

Put Ninja 300 rearsets on. Really improves the look! Doesn't have that machined industrial look that aftermarket rearsets have.


Last futzed with by DannoXYZ; June 22nd, 2019 at 07:27 PM.
DannoXYZ is offline   Reply With Quote


Old June 22nd, 2019, 06:33 PM   #14
Raddad70
ninjette.org member
 
Name: Dave
Location: Pittsburgh
Join Date: Jan 2019

Motorcycle(s): Honda cx650, 2005 ninja 250

Posts: 39
I second the 300 rearsets. I think the color would be a close match to your exhaust. Could you install some db killers or fiberglass batting to quite them down?
Raddad70 is offline   Reply With Quote


Old June 23rd, 2019, 08:00 AM   #15
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Quote:
Originally Posted by DannoXYZ View Post
I got those tyres on my street newgen. Really works well!

Put Ninja 300 rearsets on. Really improves the look! Doesn't have that machined industrial look that aftermarket rearsets have.
how are those tires holding up? I put 89 miles on mine yesterday to scrub them in.
__________________________________________________
When you see me, it's already too late.

Last futzed with by dodgerdad; June 23rd, 2019 at 08:00 AM. Reason: typo
dodgerdad is offline   Reply With Quote


Old June 23rd, 2019, 08:03 AM   #16
dodgerdad
ninjette.org member
 
dodgerdad's Avatar
 
Name: Hector
Location: SoCal
Join Date: Sep 2018

Motorcycle(s): 2007 Ninja 250

Posts: 193
Quote:
Originally Posted by Raddad70 View Post
I second the 300 rearsets. I think the color would be a close match to your exhaust. Could you install some db killers or fiberglass batting to quite them down?
Looks like the color would certainly match up well. I ordered the afermarket ones so we'll see how it goes.

As for the exhaust, there's no way to repack them without really tearing them apart. I haven't heard of DB killers, I'll look them up. Worse case, I may swap them out for aftermarket exhausts that have a removable baffle.
__________________________________________________
When you see me, it's already too late.
dodgerdad is offline   Reply With Quote


Old June 23rd, 2019, 02:25 PM   #17
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Doesn't look like those mufflers can use noise inserts.

Not that difficult to drill out rivets.
Then wrap inner pipe with ceramic muffler packing.
https://www.amazon.com/dp/B011PW22DE/
Use safety-wire to loosely hold in position.
Stuff back into muffler.
Install new rivets.
DannoXYZ is offline   Reply With Quote


Old June 23rd, 2019, 02:28 PM   #18
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Quote:
Originally Posted by dodgerdad View Post
how are those tires holding up? I put 89 miles on mine yesterday to scrub them in.
I've put about 2000-miles on mine. Barely tell they've been used. So I anticipate I can get 8-10k miles from them.
DannoXYZ is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock street fighter/ naked headlight? Sharkride 2008 - 2012 Ninja 250R Farkles 1 November 1st, 2015 01:19 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 10:31 AM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2019 ninjette.org, All rights reserved.