July 4th, 2012, 02:02 PM | #1 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
FS: 90 Degree Angled Valve Stems - Only $22.05 - Black, Red, Blue, Gold and Silver
From your favorite local vendor; 90 Degree Drop Forged Aluminum Angled Tire Valve Stems in various colors... Available in: -Black -Red -Silver -Gold -Blue Available in both 11.3mm and 8.3mm For our bikes and most Japanese bikes you will need the 11.3mm but if you have Carrozzeria, Galespeed, OZ, Marchesini, Marvic and BST wheels you will need the 8.3mm ones. These are the same valve stems which come from the factory on the fancy italian bikes (Ducati, Aprillia, etc) and many MotoGP, WSBK, Moto2 teams use these valve stems. Generally race teams like to run a different color valve stem than the wheel so that they can easily spot the valve stem. They are made in Italy and are the same valves which are sold under the Ariete brand for much more. What they do? -Easier to check pressure and fill tires (specially on the front) -Lighter than rubber stems - they weigh in at 11 grams each -They are reusable, no need to replace them like rubber valves with each tire change -Fixed to the wheel with a locking nut, can't bend, or be expelled from the wheel -The angled quill reduces the effect of centrifugal force, which tends to fling the valve core outwards in a conventional valve, leading to loss of pressure in tires. Installation Torque the locking nut to 7-10 Nm How much? $22.05 shipped for the pair! (USA & Canada) add $3 for international shipping outside of USA & Canada How to purchase? Use the specific buy now button that corresponds to the size/color of the stem you would like. Typical delivery times are around 4 to 10 business days. Simple payment, just use the BUY NOW button below to purchase your set! 11.3mm Black - Pair --------------------------------------------------- 11.3mm Silver - Pair --------------------------------------------------- 11.3mm Gold - Pair --------------------------------------------------- 11.3mm Red - Pair --------------------------------------------------- 11.3mm Blue - Pair --------------------------------------------------- As always, if you have any questions you may PM me any time!
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
July 11th, 2012, 12:27 AM | #2 |
Crashing is just practice
Name: Evan
Location: Long Beach, CA
Join Date: Jun 2011 Motorcycle(s): 2009 Ninja ex250 (Tinkerbell); 2008 Ninja ex250 (Frankenstein) Posts: 101
|
No green?
__________________________________________________
SEMPER FI ~*UNSTOPPABLE*~ Kawasaki - Green means GO! |
|
July 11th, 2012, 06:23 PM | #3 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
July 11th, 2012, 07:01 PM | #4 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
I have yet to put mine on lol
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
July 11th, 2012, 08:12 PM | #5 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
July 13th, 2012, 08:55 PM | #6 |
.......................
Name: Peter
Location: New York
Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113
|
I bought these off slowboy for my R6
|
|
July 31st, 2012, 08:18 PM | #7 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
All colors in stock and ship out daily.
One of the single best things you can do to make your bike more practical, safer and nicer looking.
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
July 31st, 2012, 09:49 PM | #8 |
ninjette.org sage
Name: Matt
Location: San Diego, CA
Join Date: May 2012 Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike) Posts: 748
|
Just bought myself a pair gold ones for my 2Fiddy
__________________________________________________
*CVMA #312*SoCal Trackdays*BigHeadz Racing*Motion Pro*Factory Effex*Leatt Brace* Racetech *Bell * Woodcraft CFM*Vortex*Hotbodies*Surface Sun Systems*Braking*LiveWire Energy*Freegun Underwear |
|
August 12th, 2012, 08:15 PM | #9 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
All colors are in stock and all orders continue to ship out daily as they are received
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
September 1st, 2012, 03:44 PM | #10 |
ninjette.org member
Name: Jason
Location: Germantown, MD
Join Date: Aug 2012 Motorcycle(s): 2013 Ducati Monster 796, 2005 Kawasaki Ninja 250R (sold), and 1985 Kawasaki GPZ900R (multiple winter project) Posts: 177
|
I got mine yesterday in the mail. I just removed the wheels and plan to have new tires mounted and balanced tomorrow.
Now the big decision... Do I point the stems to the right or left? I was thinking to the right since I usually use the side stand and would rather have the stem facing to the direction that's easiest to work with. But the brake discs are also on the right, so I should probably have them on pointing to the left. And I should be using the center stand anyway so I can spin the rear wheel. Decisions decisions... |
|
September 5th, 2012, 08:06 AM | #11 | |
.......................
Name: Peter
Location: New York
Join Date: Jul 2011 Motorcycle(s): 2003 Yamaha R6 Posts: 113
|
Quote:
I am late but I did mine off the right side, if you do them on the left where it leans it's just a pain. (I hate washing that side too) Either way, on my bike I have 2 rotors in my way or 1 rotor and one sprocket |
|
|
September 5th, 2012, 07:11 PM | #12 |
ninjette.org member
Name: Jason
Location: Germantown, MD
Join Date: Aug 2012 Motorcycle(s): 2013 Ducati Monster 796, 2005 Kawasaki Ninja 250R (sold), and 1985 Kawasaki GPZ900R (multiple winter project) Posts: 177
|
I ended up having mine pointing to the left away from the disc brakes. I figured that I'd let the guy who was mounting my tires install them without any direction from me. It hasn't been that big of a deal so far. I did notice that the valve stems aren't locked into place and have some play. I hope this isn't because I don't have enough torque on the nut. I probably should have used some loctite just to make sure. Oh well.
|
|
October 5th, 2012, 09:10 PM | #13 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
I get mine pointed to the right side because of the kickstand.
The nuts are locking nuts, once they are torqued they should be good to go. If it isn't leaking, shouldn't be a problem, but next time you have the tire off, check the torque on those bad boys. Between 62-88 in-lbs is the right torque.
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
February 9th, 2013, 09:55 AM | #14 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
Bump!
THese are all in stock and ready to go guys and gals. Orders placed from USA will ship from USA and will take 1-3 business days for delivery. Orders placed from Canada will ship from Canada and will take 2-5 business days for delivery. Best quality products you can count on!
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
February 22nd, 2013, 05:35 AM | #15 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
All colors are in stock ready to ship!
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
March 15th, 2013, 08:53 AM | #16 |
ninjette.org member
Name: Mani
Location: NY
Join Date: Dec 2011 Motorcycle(s): ZX6-R and etc. Posts: 137
|
Great addition to any street or track ninjette!
__________________________________________________
90 Degree Angled Valve Stems - ONLY $26.95 - FREE SHIPPING - Click Here for Thread |
|
March 15th, 2013, 08:55 AM | #17 |
ninjette.org sage
Name: Fox
Location: Boston
Join Date: May 2012 Motorcycle(s): 08 250R Posts: 881
|
hmm... these would rock.
maybe when i get new tires, hopefully later this summer. |
|
June 10th, 2013, 01:59 PM | #18 |
ninjette.org sage
Name: Matt
Location: San Diego, CA
Join Date: May 2012 Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike) Posts: 748
|
Bought another set of gold ones since I got a spare set of wheels.
__________________________________________________
*CVMA #312*SoCal Trackdays*BigHeadz Racing*Motion Pro*Factory Effex*Leatt Brace* Racetech *Bell * Woodcraft CFM*Vortex*Hotbodies*Surface Sun Systems*Braking*LiveWire Energy*Freegun Underwear |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 90 Degree Angled Valve Stems - Only $26.95 - Free Worldwide Shipping! | SlowBoyRacing | Motorcycle-related | 1 | February 19th, 2015 05:10 PM |
Dropped bike off for valve adj. v. New valve stems? | edxmon | 2008 - 2012 Ninja 250R Tech Talk | 14 | July 17th, 2012 04:55 PM |
FS: 90 Degree Angled Aluminum Valve Stems - $19.99 Shipped! | SlowBoyRacing | Motorcycle-related | 82 | June 12th, 2012 04:42 PM |
|
|