Pre-gen odds and ends...

Modzilla · January 17th, 2013, 12:34 AM

I just finished my project and i have some parts left over. nothin crazy, but here's a list in case yer needin' somethin for a stock replacement or restoration.

stock rear turn signal lenses w/ rubber gaskets and screws (no reflector plate, bulb sockets or wiring)

stock license plate light & wiring (mount, etc)

all 4 reflectors (2 front, 2 back) in fine shape with gaskets.

i know it's nuthin' special, but if ya need it, here it is! just pay shipping. we can do the paypal thing, no worries.

GearMonkey · January 17th, 2013, 08:47 PM

Do you happen to know if the pregen license plate connector is the same as the newgen?

After looking at pictures, I'm pretty sure it is the same. I'll take it off your hands.

deeno415 · July 1st, 2013, 04:03 AM

Quote:

Originally Posted by Modzilla

I just finished my project and i have some parts left over. nothin crazy, but here's a list in case yer needin' somethin for a stock replacement or restoration.

all 4 reflectors (2 front, 2 back) in fine shape with gaskets.

i know it's nuthin' special, but if ya need it, here it is! just pay shipping. we can do the paypal thing, no worries.

I'm interested in the 2 front reflectors if they are still available... I'm in SF,CA.

trollin07 · March 12th, 2014, 08:25 PM

Pm me if you still have these parts thanks. In need of tag light and tag mount, can add a few buck to shipping cost thanks!

January 17th, 2013, 12:34 AM	#1
Modzilla Fear the Beard Name: Brian Location: South of Atlanta Join Date: Jan 2013 Motorcycle(s): 01 EX250 Posts: 83	Pre-gen odds and ends... I just finished my project and i have some parts left over. nothin crazy, but here's a list in case yer needin' somethin for a stock replacement or restoration. stock rear turn signal lenses w/ rubber gaskets and screws (no reflector plate, bulb sockets or wiring) stock license plate light & wiring (mount, etc) all 4 reflectors (2 front, 2 back) in fine shape with gaskets. i know it's nuthin' special, but if ya need it, here it is! just pay shipping. we can do the paypal thing, no worries. __________________________________________________ Women and roads need curves.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New-gen engine in Pre-gen frame. Oil leak under exhaust ports.	AFazakerley	2008 - 2012 Ninja 250R Tech Talk	11	June 5th, 2016 02:03 PM
Fitting a new gen front wheel on a pre gen?	thumper64	1986 - 2007 Ninja 250R Tech Talk	13	November 6th, 2013 02:44 PM
Bike size, new gen vs pre gen(zzr)	bowerbird100	General Motorcycling Discussion	6	August 1st, 2013 05:49 PM
Pre-gen (2007 and older) and "new pre-gen" (2008-2012) frames	kjohng	General Motorcycling Discussion	5	February 27th, 2013 10:03 AM
FS/ part out new gen and pre gen 250r ninja	carlos	Motorcycle-related	3	May 14th, 2012 10:25 PM

January 17th, 2013, 08:47 PM	#2
GearMonkey ninjette.org guru Name: Scott Location: Atlanta Join Date: Sep 2012 Motorcycle(s): 2010 Ninja 250R Posts: 363	Do you happen to know if the pregen license plate connector is the same as the newgen? After looking at pictures, I'm pretty sure it is the same. I'll take it off your hands.

March 12th, 2014, 08:25 PM	#4
trollin07 Ninja noob Name: Thomas Location: Brevard county Florida Join Date: Mar 2014 Motorcycle(s): 07 ex250 , 99 ex250 Posts: 10	Pm me if you still have these parts thanks. In need of tag light and tag mount, can add a few buck to shipping cost thanks!