|
June 1st, 2011, 10:32 PM
|
#1 |
|
ninjette.org member
Name: Braydan
Location: Saskatchewan
Join Date: Mar 2011 Motorcycle(s): Kawasaki ZZR 250 Posts: 39
|
Idle fluctuates
Just got the bike back together and a while after start up the idle will rise without any assistance from the user and it will only drop once given a quick twist of the throttle. It idles fine after start up at about 2000 RPM and will rise up to 3000 RPM where it will sit, it seems, until a bit of throttle is given, then it will drop below 2000 and come back up.
Any suggestions on the problem? Background on the bike: Just finished adjusting the valves/ replacing the cam chain/ cleaning the carbs (put back together properly). |
|
|
|
June 1st, 2011, 11:22 PM
|
#2 |
|
Join Date: Nov 2008 Posts: Too much.
|
make sure all the clamps are tight and/or you didn't overlook a vacuum hose being loose or leaking.
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Idle issues - Idle is different every time I start up. | 106 | 1986 - 2007 Ninja 250R Tech Talk | 6 | November 13th, 2014 04:57 PM |
| what should i idle at | EvilPooMonkey | 2008 - 2012 Ninja 250R Tech Talk | 7 | July 8th, 2012 03:00 PM |
| Idle jumps to 9000 rpm on choke then wont stay idle after off | Shawn250 | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 19th, 2012 06:45 AM |
| Idle problem | cgborders | 1986 - 2007 Ninja 250R Tech Talk | 4 | May 19th, 2012 12:58 PM |
| Idle Question | THE BIG SITT | 2008 - 2012 Ninja 250R Tech Talk | 22 | October 29th, 2011 07:15 AM |
|
|
