February 19th, 2020, 11:35 AM | #1 |
ninjette.org member
Name: Cal
Location: San Francisco
Join Date: Jun 2017 Motorcycle(s): '09 Ninja 250R Posts: 180
|
Is The Generator Cover The Same For Pre Gens as New Gens?
My current one has a crack that's leaking. Looking online they have different part numbers, but some online being sold are saying the part is for 88-12 years new and old gen and at first glance the two look the same when browsing online
Also considering JB Weld. Pretty sure I over torqued the sproket cover and caused a crack with grew over time Last futzed with by nocturncal; February 19th, 2020 at 03:06 PM. |
|
February 19th, 2020, 07:10 PM | #2 |
ninjette.org member
Name: Cal
Location: San Francisco
Join Date: Jun 2017 Motorcycle(s): '09 Ninja 250R Posts: 180
|
I ended up packing the crack with silicone earlier today for a short term fix, rode 50mi so far and send to be holding so far
|
|
February 19th, 2020, 10:07 PM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hey good job!
If you pack sealant from both outside and inside to they touch in middle of crack, it makes for very permanent seal! |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Post your Pre Gens | dbking321 | Pictures | 228 | June 20th, 2022 11:35 AM |
Pre-Gens on the Dragon! | livewire83 | Videos | 2 | April 19th, 2014 11:16 AM |
custom pre gens | darrell85 | General Motorcycling Discussion | 2 | September 1st, 2010 11:18 AM |
16 teeth front sprocket - fits pre-gens and new-gens | Rayme | Motorcycle-related | 2 | August 2nd, 2009 10:18 AM |
New Rearsets for Selected Pre-Gens: | komohana | 1986 - 2007 Ninja 250R Farkles | 31 | June 2nd, 2009 12:44 PM |
|
|