first look at my new gsxr exhaust

PSO-08ninja250rblack · February 24th, 2009, 02:00 PM

Hey i just installed my sgxr exhaust today. heres a few quick pics, havent had a chance to start her up just yep but il post some vid when i start ridin again. cya

heres my bike with left fairing off:

stock pipe

gsxr pipe

-

-

-

Buffalony · February 24th, 2009, 02:13 PM

Quote:

Originally Posted by PSO-08ninja250rblack

Hey i just installed my sgxr exhaust today. heres a few quick pics, havent had a chance to start her up just yep but il post some vid when i start ridin again. cya

F that. I need to hear that sh!t NOW!

Looks ok. maybe would look better slightly more upswept.

Good job.

Fire it up and post a vid

Ninja007 · February 24th, 2009, 02:21 PM

exhaust looks good. what did you paint your rear passenger pegs with?

PSO-08ninja250rblack · February 24th, 2009, 02:38 PM

Quote:

Originally Posted by Buffalony

Looks ok. maybe would look better slightly more upswept.

well i really dig that it follows the swing arm, so i didnt want it to sweep upwards...

Quote:

Originally Posted by Buffalony

F that. I need to hear that sh!t NOW! Fire it up and post a vid

hehe=) i will as soon as i have time. thx

PSO-08ninja250rblack · February 24th, 2009, 02:39 PM

Quote:

Originally Posted by Ninja007

exhaust looks good. what did you paint your rear passenger pegs with?

just spraypainted them with ordinary glossy black. just remember to clean them good and use some alcohol to remove any fat before painting

Buffalony · February 24th, 2009, 03:01 PM

Quote:

Originally Posted by PSO-08ninja250rblack

well i really dig that it follows the swing arm, so i didnt want it to sweep upwards...

Fair enough. Guess it looks right in that aspect.

Nemy · February 24th, 2009, 03:31 PM

looks real good. +1 for posting a vid. I'm thinking it might sound better than the modded stockers too.

Buffalony · February 24th, 2009, 03:58 PM

Quote:

Originally Posted by Nemy

looks real good. +1 for posting a vid. I'm thinking it might sound better than the modded stockers too.

WHAT? WHERE THE F IS THE VID?????

bob706 · February 24th, 2009, 04:22 PM

http://www.youtube.com/watch?v=PkRNP_-djIA

Not his bike but same exhaust

Buffalony · February 24th, 2009, 04:27 PM

Quote:

Originally Posted by bob706

http://www.youtube.com/watch?v=PkRNP_-djIA

Not his bike but same exhaust

sweet. thanks. Did you hear the drive by

I like it.
It's almost cute.

Nemy · February 24th, 2009, 11:42 PM

Quote:

Originally Posted by Buffalony

sweet. thanks. Did you hear the drive by

I like it.
It's almost cute.

lol i dont think its supposed to sound cute! but it does sound good. And wicked cheap if you're replacing ur gsxr exhaust anyways. It's like getting a 2 for 1 special!

Alcorn69 · February 25th, 2009, 12:29 AM

Looks sick

kkim · February 25th, 2009, 12:38 AM

for anyone considering this mod, you might want to read this thread and ask Mike questions.

http://www.ninjette.org/forums/showthread.php?t=10998

PSO-08ninja250rblack · February 25th, 2009, 01:03 AM

hehe yep got mine from Mike, so that i didnt have to make any cuts to my org. pipe/can.
it is an experiment, so we will see if it acts differently on a FI bike...

Guinss · February 25th, 2009, 03:04 AM

that looks sick!

fits that black bike very vell

Jane Honda · February 25th, 2009, 12:46 PM

I totally dig it!

PSO-08ninja250rblack · February 25th, 2009, 01:00 PM

thanks guys, cant wait to fire her up=)

DirtyBoy · February 25th, 2009, 06:09 PM

I did mine a few weeeks ago and can tell you it's LOUD. When your on the bike it doesn't seem so loud but everyone tells me they can hear me way before I get there. I think it's better looking than any of the pipes currently available which was the main reason I did it.

PSO-08ninja250rblack · February 25th, 2009, 10:59 PM

yep i also think the there wasnt a better looking choice out there so i went for it=) nice to hear that you are happy with yours. i plan on making a form of silencer, so i can maby just take the top of...

aznsap · February 26th, 2009, 12:44 AM

you think there's a way to incorporate the baffle that comes w/ the gsxr exhaust cleanly?

PSO-08ninja250rblack · February 26th, 2009, 08:04 AM

what exactly do you mean when you say baffle?

aznsap · February 26th, 2009, 08:12 AM

if you look @ the stock gsxr exhaust, there's a thing that's attached before it that muffles the exhaust sound, probably much more than the can that is attached to your bike.

PSO-08ninja250rblack · February 26th, 2009, 09:50 AM

there is a big catalyst , but that need to be cut away, it is very big so there would be no room to fit it...

PSO-08ninja250rblack · February 26th, 2009, 09:51 AM

but anyhoo, hey heres a real quick vid. but il make a better one with some real revs when the season starts for real...http://www.youtube.com/watch?v=x152WAwweFQ

ride2max · February 26th, 2009, 09:59 AM

Look nice n sporty, but how is the performance?

PSO-08ninja250rblack · February 26th, 2009, 10:41 AM

dont know, havent ridden it yet... but i dont think theres any difference...

Cochese · April 18th, 2009, 08:52 PM

Tag for info.

PSO-08ninja250rblack · April 19th, 2009, 01:38 AM

what?

Cochese · April 19th, 2009, 01:42 AM

Quote:

Originally Posted by PSO-08ninja250rblack

what?

I was just subscribing to the thread.

I am planning on this mod but need more information about how it will work with an aftermarket header, intake, etc.

I am curious about the inside diameter of the can compared to the header I have....

Thanks!

Cochese · April 30th, 2009, 11:22 PM

What is the inside diameter?

I found a place to pick up universal baffle and fiberglass wrap but I need to know what the inside diameter is of the GSXR can so I can buy the right size...

I'm cross posting in the GSXR can threads.... don't kill me.

February 24th, 2009, 02:00 PM	#1
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	first look at my new gsxr exhaust Hey i just installed my sgxr exhaust today. heres a few quick pics, havent had a chance to start her up just yep but il post some vid when i start ridin again. cya heres my bike with left fairing off: stock pipe gsxr pipe - - - - __________________________________________________ "...black and undetectable by radar..."

February 25th, 2009, 12:29 AM	#12
Alcorn69 ninjette.org member Name: Tim Location: Salem,OR Join Date: Feb 2009 Motorcycle(s): 2007 Yamaha R1, 2009 Ninja 250R Posts: 22	Looks sick __________________________________________________ Clever slogan

February 25th, 2009, 01:03 AM	#14
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	hehe yep got mine from Mike, so that i didnt have to make any cuts to my org. pipe/can. it is an experiment, so we will see if it acts differently on a FI bike... __________________________________________________ "...black and undetectable by radar..."

February 25th, 2009, 01:00 PM	#17
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	thanks guys, cant wait to fire her up=) __________________________________________________ "...black and undetectable by radar..."

February 25th, 2009, 06:09 PM	#18
DirtyBoy ninjette.org member Name: Leo Location: Phoenix, Az Join Date: Dec 2008 Motorcycle(s): 2008 Ninja 250R Posts: 66	I did mine a few weeeks ago and can tell you it's LOUD. When your on the bike it doesn't seem so loud but everyone tells me they can hear me way before I get there. I think it's better looking than any of the pipes currently available which was the main reason I did it. __________________________________________________ 49T sprkt/ EK gold chain/ Galfer pads and SS lines/120 frt 150 rr Pilot Powers/ GSX-R can/Desnorkled/ Raised needles/ Slider spools/ Cowl/ LED rear signals/ Fender eliminator/ Tinted lights / Emu seat

February 24th, 2009, 02:21 PM	#3
Ninja007 忍者 Name: Jake Location: WA Join Date: Dec 2008 Motorcycle(s): None Now - Used to have an '08 Ninja 250R Candy Blue Posts: 151	exhaust looks good. what did you paint your rear passenger pegs with?

February 24th, 2009, 03:31 PM	#7
Nemy ninjette.org sage Name: Tim Location: Portland, OR Join Date: Dec 2008 Motorcycle(s): 2009 SE Ninja 250R Posts: 796	looks real good. +1 for posting a vid. I'm thinking it might sound better than the modded stockers too.

February 24th, 2009, 04:22 PM	#9
bob706 ninjette.org certified postwhore Name: Sean Location: Mary Esther, FL Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.	http://www.youtube.com/watch?v=PkRNP_-djIA Not his bike but same exhaust

February 25th, 2009, 12:38 AM	#13
kkim Join Date: Nov 2008 Posts: Too much.	for anyone considering this mod, you might want to read this thread and ask Mike questions. http://www.ninjette.org/forums/showthread.php?t=10998

February 25th, 2009, 03:04 AM	#15
Guinss ninjette.org guru Name: Simen Location: Norway Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298	that looks sick! fits that black bike very vell

February 25th, 2009, 12:46 PM	#16
Jane Honda ninjette.org member Name: Kris Location: Willamette Valley Join Date: Feb 2009 Motorcycle(s): 08 Ninja 250R Posts: 45	I totally dig it!

February 25th, 2009, 10:59 PM	#19
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	yep i also think the there wasnt a better looking choice out there so i went for it=) nice to hear that you are happy with yours. i plan on making a form of silencer, so i can maby just take the top of... __________________________________________________ "...black and undetectable by radar..."

February 26th, 2009, 12:44 AM	#20
aznsap ninjette.org newbie Name: andy Location: chicago Join Date: Feb 2009 Motorcycle(s): none Posts: 5	you think there's a way to incorporate the baffle that comes w/ the gsxr exhaust cleanly?

February 26th, 2009, 08:04 AM	#21
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	what exactly do you mean when you say baffle? __________________________________________________ "...black and undetectable by radar..."

February 26th, 2009, 08:12 AM	#22
aznsap ninjette.org newbie Name: andy Location: chicago Join Date: Feb 2009 Motorcycle(s): none Posts: 5	if you look @ the stock gsxr exhaust, there's a thing that's attached before it that muffles the exhaust sound, probably much more than the can that is attached to your bike.

February 26th, 2009, 09:50 AM	#23
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	there is a big catalyst , but that need to be cut away, it is very big so there would be no room to fit it... __________________________________________________ "...black and undetectable by radar..."

February 26th, 2009, 09:51 AM	#24
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	but anyhoo, hey heres a real quick vid. but il make a better one with some real revs when the season starts for real...http://www.youtube.com/watch?v=x152WAwweFQ __________________________________________________ "...black and undetectable by radar..."

February 26th, 2009, 09:59 AM	#25
ride2max ninjette.org member Name: Cheng Location: Malaysia KL Join Date: Feb 2009 Motorcycle(s): Kawasaki ninja250r Posts: 70	Look nice n sporty, but how is the performance?

February 26th, 2009, 10:41 AM	#26
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	dont know, havent ridden it yet... but i dont think theres any difference... __________________________________________________ "...black and undetectable by radar..."

April 18th, 2009, 08:52 PM	#27
Cochese The Grand Royal Name: Cochese Location: Unmarked Rustbox Join Date: Dec 2008 Motorcycle(s): 2009 Ninja 250R Posts: 258	Tag for info.

April 19th, 2009, 01:38 AM	#28
PSO-08ninja250rblack ninjette.org member Name: Peter Location: Copehagen, Denmark Join Date: Dec 2008 Motorcycle(s): 2008 Black Kawasaki ninja 250r Posts: 40	what? __________________________________________________ "...black and undetectable by radar..."

April 30th, 2009, 11:22 PM	#30
Cochese The Grand Royal Name: Cochese Location: Unmarked Rustbox Join Date: Dec 2008 Motorcycle(s): 2009 Ninja 250R Posts: 258	What is the inside diameter? I found a place to pick up universal baffle and fiberglass wrap but I need to know what the inside diameter is of the GSXR can so I can buy the right size... I'm cross posting in the GSXR can threads.... don't kill me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GSXR Exhaust on Ninja	Javi	2008 - 2012 Ninja 250R Farkles	17	March 19th, 2012 10:16 PM
GSXR Exhaust on Ninja question	james.gravley	2008 - 2012 Ninja 250R Tech Talk	7	August 16th, 2011 07:51 PM
My Exhaust Sound...Gsxr Can	Tintkng	Videos	10	December 18th, 2010 09:58 AM
FS: 06/07 GSXR OEM Exhaust	wvninja	Motorcycle-related	4	September 8th, 2010 02:02 PM
GSXR Exhaust on the 250	Tintkng	2008 - 2012 Ninja 250R Tech Talk	17	May 12th, 2009 09:58 PM