December 29th, 2015, 05:24 PM | #1 |
ninjette.org member
Name: Kyle
Location: Portland, Oregon
Join Date: Sep 2013 Motorcycle(s): 2008 Ninja 250R Posts: 106
|
41078 Replacement (i.e. the speedo gear assembly)
Does anyone know of an aftermarket replacement for the speedometer gear housing? (Part 41078)
This would be for race applications where the speedometer cable is not used. Up until now I've been using the oem gear housing, but I just discovered that it's very brittle (casted steel?), so it needs to be replaced. Yep, it's way broken... Any ideas, suggestions?
__________________________________________________
- OMRRA Racer #83 - -- OMRRA Media Group Editor/Producer -- Last futzed with by simook; December 29th, 2015 at 09:44 PM. |
|
December 29th, 2015, 09:48 PM | #2 |
ninjette.org member
Name: Kyle
Location: Portland, Oregon
Join Date: Sep 2013 Motorcycle(s): 2008 Ninja 250R Posts: 106
|
No idea how this happened.
__________________________________________________
- OMRRA Racer #83 - -- OMRRA Media Group Editor/Producer -- |
|
December 29th, 2015, 10:36 PM | #3 |
ninjette.org certified postwhore
Name: Ryan
Location: Beaufort SC
Join Date: Aug 2015 Motorcycle(s): 05 Ninja 250, 04 KTM 625 SMC, 01 Xc250 Posts: A lot.
Blog Entries: 3
|
I was told there is no replacement, I'm in the process of finding something that will work, but I haven't tried to hard yet.
__________________________________________________
Because Unregistered sucks at riding. |
|
December 30th, 2015, 06:37 AM | #4 |
ninjette.org certified postwhore
Name: Jason
Location: Monroe, MI
Join Date: May 2013 Motorcycle(s): '75 CB550:.'82 XV920:.'00 KLR650:.'00 EX250:.'08 Ninja 250 Posts: A lot.
MOTM - June '15
|
It's just a spacer at this point. Find the right ID tubing and cut it to the correct length.
__________________________________________________
'82 XV920: Soon to be tracker--'00 KLR685:adv --'04 DRZ400E--'12 Super Tenere --'13 Versys Ride more, worry less. |
|
December 30th, 2015, 07:39 AM | #5 |
ninjette.org guru
Name: Pat
Location: SW VA
Join Date: Feb 2015 Motorcycle(s): 286, 296, 599, 799 Posts: 436
|
try a cush drive spacer from the rear
|
|
December 30th, 2015, 07:44 AM | #6 |
ninjette.org guru
Name: David
Location: Knoxville, TN
Join Date: Mar 2015 Motorcycle(s): 14 Ninja 300 (Track Only), 07 CRF150RB Posts: 281
|
I was thinking about trying to make a spacer to replace this since its kinda a pain in the ass haha
|
|
December 30th, 2015, 09:36 AM | #7 |
ninjette.org certified postwhore
Name: Ryan
Location: Beaufort SC
Join Date: Aug 2015 Motorcycle(s): 05 Ninja 250, 04 KTM 625 SMC, 01 Xc250 Posts: A lot.
Blog Entries: 3
|
That was my idea, but with the 3 minuets I looked, I couldn't find metric tube.
__________________________________________________
Because Unregistered sucks at riding. |
|
December 30th, 2015, 09:46 AM | #8 | |
ninjette.org guru
Name: Pat
Location: SW VA
Join Date: Feb 2015 Motorcycle(s): 286, 296, 599, 799 Posts: 436
|
Quote:
|
|
|
December 30th, 2015, 11:01 AM | #10 |
ninjette.org certified postwhore
Name: Ryan
Location: Beaufort SC
Join Date: Aug 2015 Motorcycle(s): 05 Ninja 250, 04 KTM 625 SMC, 01 Xc250 Posts: A lot.
Blog Entries: 3
|
If someone on here had a lathe it would be sweet.
__________________________________________________
Because Unregistered sucks at riding. |
|
December 30th, 2015, 11:09 AM | #11 | |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Quote:
https://www.ninjette.org/forums/showthread.php?t=231634
__________________________________________________
MCRA.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'08-'12 Front Speedo Replacement Spacer | DCMoney | Motorcycle-related | 34 | April 29th, 2017 12:34 AM |
- - - DCMoney 08-12 Speedo Replacement Spacer Review - - - | Triple R | 2008 - 2012 Ninja 250R Tech Talk | 1 | June 5th, 2015 06:30 AM |
|
|