|
July 28th, 2010, 06:21 PM
|
#1 |
|
ninjette.org newbie
Name: J
Location: NJ
Join Date: Jun 2010 Motorcycle(s): '08 Ninja 250 Posts: 5
|
hard time removing the sprocket cover
I'm trying to install shogun frame sliders. I'm at the step where I have to remove the sprocket cover to cut. The 3 bolts were removed along w/ the shift lever link bolt and shift shaft. The stupid cover just won't come over.. tried pulling it and using some rope to pull it. Also tried hitting it with a 'wooden mallet' but nada.
All the instructions said you should pull it off but damn it's hard... any solutions or suggestions? |
|
|
|
July 28th, 2010, 07:12 PM
|
#2 |
|
ninjette.org newbie
Name: J
Location: NJ
Join Date: Jun 2010 Motorcycle(s): '08 Ninja 250 Posts: 5
|
nevermind! It finally came off after two hours of frustration. Heard a loud 'click', which was probably the glue. Then a crapload of 'MFERRRR' got it off.
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Trouble removing valve cover. | Floki | 2008 - 2012 Ninja 250R Tech Talk | 6 | January 4th, 2014 06:06 AM |
| DIY: Removing the Valve Cover on a Pregen | n4mwd | Videos | 1 | July 1st, 2013 05:26 PM |
| Removing the Valve Cover | n4mwd | 1986 - 2007 Ninja 250R Tech Talk | 19 | June 24th, 2013 08:25 PM |
| time to change sprocket? | rousp | 2008 - 2012 Ninja 250R Tech Talk | 5 | February 16th, 2013 09:54 AM |
| Need help removing front sprocket (countershaft) | cb160racer | 2008 - 2012 Ninja 250R Tech Talk | 37 | November 11th, 2012 10:53 PM |
| Thread Tools | |
|
|
