January 31st, 2010, 01:36 PM | #241 |
ninjette.org member
Name: Greg
Location: Bakersfield, CA
Join Date: May 2009 Motorcycle(s): '09 250r Posts: 75
|
Matt.....do you have a photo of the CPB undertail????
|
|
January 31st, 2010, 02:30 PM | #242 | |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Quote:
I've been idle in the forums lately but I am still wanting to purchase it along with a CPB hugger and an exhaust hanger from you. |
|
|
January 31st, 2010, 02:35 PM | #243 |
ninjette.org member
Name: Ken
Location: NY
Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129
|
Matt, will the new undertail exhaust work with either the original Sportisimoto undertail or the new one?
|
|
January 31st, 2010, 02:46 PM | #244 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Woot!!! Finally in. How is the CF hugger looks in person Matt?
Posted via Mobile Device |
|
January 31st, 2010, 04:13 PM | #245 |
ninjette.org member
Name: Ryan
Location: Augusta Me
Join Date: Dec 2008 Motorcycle(s): 09 250R - 08 250R - 03 250EX - 86 KLR 250 Posts: 60
|
Awesome, Been waiting for the Undertail for a while. I cant wait to get it installed with the integrated tail light that been sitting patiently on my work bench.
|
|
January 31st, 2010, 08:04 PM | #246 |
ninjette.org member
Name: Brahmantio
Location: Jakarta
Join Date: Dec 2008 Motorcycle(s): N250R Posts: 101
|
|
|
January 31st, 2010, 11:37 PM | #247 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I'll have better pictures for you tomorrow Jean. CPB under tail tomorrow. Ryan 08 or 09 red? I only have 08 until next shipment. CZroe I have not checked on he blue duc tail for you yet. I forgot. Asking bram now.
__________________________________________________
Sportisimoto USA is born. |
|
February 1st, 2010, 06:44 AM | #248 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
I wish it was.... it was -28 degrees here this morning and that is without the wind chill
__________________________________________________
Using Pedal Power |
|
February 1st, 2010, 07:47 AM | #249 |
ninjette.org member
Name: Ryan
Location: Augusta Me
Join Date: Dec 2008 Motorcycle(s): 09 250R - 08 250R - 03 250EX - 86 KLR 250 Posts: 60
|
|
|
February 1st, 2010, 10:19 AM | #250 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Got one for you pm me. Rob you pm me too.
__________________________________________________
Sportisimoto USA is born. |
|
February 1st, 2010, 10:25 AM | #251 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
I sent you a PM this morning. Replied to the one you sent me....I think
__________________________________________________
Using Pedal Power |
|
February 1st, 2010, 11:20 PM | #252 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
Hey Matt, you'll start shipping them out soon?
Btw, how's the CF quality as seen in person? I only saw one blurry picture awhile back. Posted via Mobile Device |
|
February 2nd, 2010, 01:07 AM | #253 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
The quality is pretty good especially for the price. I would have like an extra clear coat on it but it is super glossy. Hoping to have everything out tomorrow.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 01:22 AM | #254 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Undertail exhaust update. We are going to throw down and compete with the big boys. Our undertail is going to be produced by the factory that makes some of Yoshimuira's top end exhausts. The price is going up as a result but these exhausts will be flawless and in the price range of the other top exhausts.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 02:45 AM | #255 | |
CVMA / AFM / M1GP #250
Name: Steve
Location: Los Angeles
Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.
|
Quote:
Also, what kind of frame sliders will be compatible with this exhaust, and your race bodywork? any idea yet? |
|
|
February 2nd, 2010, 06:12 AM | #256 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
^^^ I don't think there is any pic to show yet esp when it is made across the pond.
Ztrack, if all it needs is a coat of clear then it's all good. I can sand it with 350 grid and spray a couple of clear for it. Thanks Posted via Mobile Device |
|
February 2nd, 2010, 10:57 AM | #257 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I would clear it for longevity. Because I do not believe it is. But I am not a painting expert.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 11:00 AM | #258 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Here is a pic of one of the first prototypes.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 11:08 AM | #259 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
Looking good
__________________________________________________
Using Pedal Power |
|
February 2nd, 2010, 11:33 AM | #260 |
ninjette.org sage
Name: J.G.
Location: Austin
Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959
|
That does look good - plan on making a sh*tload, people are going to be lining up for this exhaust - and I plan on being at towards the front.
|
|
February 2nd, 2010, 12:41 PM | #261 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I do plan on making a massiveshit load
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 01:30 PM | #262 |
Pedal Power
Name: Rob
Location: Winterpeg (Winnipeg)
Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401
|
I have contemplated getting a ZX6 undertail exhaust and trying to see how I could mod it to work, but I have a feeling that yours will look better and be cheaper in the long run....that and it will be made for our bikes
__________________________________________________
Using Pedal Power |
|
February 2nd, 2010, 01:44 PM | #263 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Ya your really looking at an expensive project there
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 02:25 PM | #264 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
If only there were a way to get that undertail exhaust look without increasing the dB.
|
|
February 2nd, 2010, 02:50 PM | #265 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Actually the prototype is not as loud as our other styles.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 04:26 PM | #266 |
Fighting Texas Aggie '08
Name: Mitchell
Location: Allen, Tx
Join Date: Feb 2009 Motorcycle(s): 2008 Ninja 250r (Race), 2005 Kawasaki Ninja ZX-6R 636 (Track), 2005 Ducati Monster 620 (Street) Posts: 541
|
maybe pics of with the fairings on? looking good btw
|
|
February 2nd, 2010, 06:51 PM | #267 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
How much louder than stock? My hearing is so bad that I don't want anything that could make it worse. I don't wear earplugs so I can hear my Bluetooth kit and a loud exhaust would hurt my ability to hear it as well.
|
|
February 2nd, 2010, 07:43 PM | #268 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
way louder than stock. just like everything else.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 07:46 PM | #269 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Ok $110 shipped on the remaining undertails I have. They all have slight cracks in the paint in the weak spot on the undertail most are not noticeable. The are also in a spot where they are not visible when mounted. There fore they are $25 off.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 07:47 PM | #270 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
February 2nd, 2010, 07:48 PM | #271 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Ya also it should be noted the hugger we make will not play nice with the undertail exhaust.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 08:45 PM | #272 |
ninjette.org member
Name: Jerry
Location: Ontario, Canada
Join Date: Jun 2009 Motorcycle(s): 09 EX250 LE Posts: 117
|
|
|
February 2nd, 2010, 08:56 PM | #273 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I think it will be a clearance thing.
__________________________________________________
Sportisimoto USA is born. |
|
February 2nd, 2010, 10:35 PM | #274 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
it would be nice if 250r undertail's muffler is oval shaped since (IMHO) I think the oval shape muffler look more at home there then the round one...like this one on my 600rr.
|
|
February 2nd, 2010, 10:40 PM | #275 |
CVMA / AFM / M1GP #250
Name: Steve
Location: Los Angeles
Join Date: Sep 2009 Motorcycle(s): 2009 Ninja 250r, 2011 Zero S, 2009 KLR 650 Posts: A lot.
|
|
|
February 3rd, 2010, 01:35 AM | #276 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
February 3rd, 2010, 08:27 AM | #277 |
ninjette.org member
Name: Jerry
Location: Ontario, Canada
Join Date: Jun 2009 Motorcycle(s): 09 EX250 LE Posts: 117
|
Here's a few pics of another 250 undertail exhaust. Comparing Matt's pic to the 2nd and 3rd pic, it seems that the Sportisi exhaust pipe doesn't bend upwards as much. So I'm guessing if there are clearance issues, it will be due to the pipes and not the exhaust unit itself.
|
|
February 3rd, 2010, 09:42 AM | #278 |
ninjette.org member
Name: BAD
Location: Malaysia
Join Date: Jan 2009 Motorcycle(s): Ninja 250R 2008 Model Posts: 50
|
|
|
February 3rd, 2010, 09:45 AM | #279 |
ninjette.org guru
Name: JR
Location: Augusta, GA
Join Date: Dec 2009 Motorcycle(s): Ninja 250R Posts: 432
|
|
|
February 3rd, 2010, 02:11 PM | #280 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
I'm thinking any undertail exhaust or hugger will be an interesting combo on the 250 due to the tiny space in the rear on our bikes.
__________________________________________________
Sportisimoto USA is born. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where is Matt from Sportisimoto USA? | samw | Motorcycle-related | 25 | August 18th, 2012 12:50 PM |
Sportisimoto VR Carbon FSE | NathanUc | 2008 - 2012 Ninja 250R Farkles | 12 | July 28th, 2011 08:10 AM |
My Sportisimoto Bodywork | ztrack157 | Motorcycle-related | 6 | May 18th, 2011 02:39 PM |
Sportisimoto BRT Ignitions GB | ztrack157 | Motorcycle-related | 77 | July 27th, 2010 10:36 PM |
Got a big box from Sportisimoto USA today | 2WheelGuy | 2008 - 2012 Ninja 250R Tech Talk | 25 | February 14th, 2010 08:27 AM |
|
|