woodcraft clipon towers

gizmogamez · July 14th, 2009, 09:15 AM

everyone talks about clip ons, but what about these? does anyone have any opinion or experience?

http://www.woodcraft-cfm.com/Scripts...dproduct=17286

ROADandTRACK · July 14th, 2009, 09:35 AM

Woodcraft is the best stuff for racing.

gizmogamez · July 14th, 2009, 09:41 AM

i'm thinking about thses instead of the clip-ons, just because i've heard a few people say that the clip-ons touch either the tank or upper plastics. also I use my bike to ride to work most days in the summer (about an hour) so i was thinking this might be a good comprimise between stock and the clip-ons for comfort on long rides.

almost40 · July 14th, 2009, 10:54 AM

Give them a shot and let us know what you think.

ROADandTRACK · July 14th, 2009, 10:58 AM

nvrmnd

kkim · July 22nd, 2009, 02:45 PM

Quote:

Originally Posted by gizmogamez

i'm thinking about thses instead of the clip-ons, just because i've heard a few people say that the clip-ons touch either the tank or upper plastics.

properly adjusted, they shouldn't touch if you get the kit specifically for our bikes.

July 14th, 2009, 09:15 AM	#1
gizmogamez ninjette.org member Name: Mike Location: Barrie, Ontario, Canada Join Date: Mar 2009 Motorcycle(s): 2009 Ninja 250R SE Green Posts: 217	woodcraft clipon towers everyone talks about clip ons, but what about these? does anyone have any opinion or experience? http://www.woodcraft-cfm.com/Scripts...dproduct=17286

July 14th, 2009, 10:54 AM	#4
almost40 ninjette.org Monkey Spank Name: Kevin Location: Illinois Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.	Give them a shot and let us know what you think. __________________________________________________ Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket

July 14th, 2009, 10:58 AM	#5
ROADandTRACK R&T Suspension Name: K Hertell Location: San Antonio, TEXAS Join Date: Jun 2009 Motorcycle(s): Too many to list Posts: 175	nvrmnd Last futzed with by ROADandTRACK; July 14th, 2009 at 10:59 AM. Reason: oops

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are woodcraft clipon bars hollow?	ninja2007	Ninjettes At Speed	11	October 1st, 2014 08:36 PM
DIY- Woodcraft Clipon Install	kkim	2008 - 2012 Ninja 250R Tech Talk	503	October 9th, 2013 08:46 AM
Woodcraft clipon height question	Colezombie	2008 - 2012 Ninja 250R Tech Talk	2	July 12th, 2011 01:45 AM
Clipon Vortex or Woodcraft?	JaeL	2008 - 2012 Ninja 250R Tech Talk	16	August 16th, 2009 05:26 PM

July 14th, 2009, 09:35 AM	#2
ROADandTRACK R&T Suspension Name: K Hertell Location: San Antonio, TEXAS Join Date: Jun 2009 Motorcycle(s): Too many to list Posts: 175	Woodcraft is the best stuff for racing.

July 14th, 2009, 09:41 AM	#3
gizmogamez ninjette.org member Name: Mike Location: Barrie, Ontario, Canada Join Date: Mar 2009 Motorcycle(s): 2009 Ninja 250R SE Green Posts: 217	i'm thinking about thses instead of the clip-ons, just because i've heard a few people say that the clip-ons touch either the tank or upper plastics. also I use my bike to ride to work most days in the summer (about an hour) so i was thinking this might be a good comprimise between stock and the clip-ons for comfort on long rides.