AreaP Full System Exhaust (Stainless w/12" Carbon muffler) 2008+

cocheese · December 30th, 2011, 08:17 PM

Selling everything you need to bolt it right up to your bike for one reasonable price ($295 obo):
Full Stainless Steel System w/12" Carbon Fiber Muffler (MSRP: $495)
Hanger Bracket (MSRP: $45)

There is some minor wear on the _back_ side of the muffler can, mostly the bracket, where the previous owner had it mounted too close to an aftermarket brake line. It doesn't affect functionality. The bracket can be replaced as well, but once it is mounted nobody can see the wear.

Fits 2008-2012 models. I decided to go back to stock because I just use my bike for commuting now and this pipe runs on the louder side and can get a lot of attention.

Manufacturer's product page:
http://www.areapnolimits.com/product...-250R-2008.php

Pics added below.

cocheese · January 9th, 2012, 04:46 PM

Price reduced.

dubojr1 · January 10th, 2012, 06:07 AM

I think some may be concerned that this could be one of the $150 Area P knock-offs. Is there anything you could provide to assure everyone that this is a genuine AP product?

cocheese · January 10th, 2012, 08:54 AM

Quote:

Originally Posted by dubojr1

I think some may be concerned that this could be one of the $150 Area P knock-offs. Is there anything you could provide to assure everyone that this is a genuine AP product?

I didn't even know there was such a thing. The previous owner never furnished receipts for the mods.

Is there any distinguishing factor between the knockoffs and the real ones?

In any case, thanks for the heads up.

dubojr1 · January 10th, 2012, 09:08 AM

I hear they are a pretty close match. @kbryant is the owner of Area P and he may could help. Here's is his member page for your use.

http://www.ninjette.org/forums/member.php?u=143

You can also do a search for "PLMFG" and find more information here about the knock-off. Most have no respect for it but others don't care it was a ripped off design, mass produced by China, and sold for less cost.

Area P is a small American company and my loyalty will remain with them.

cocheese · January 10th, 2012, 09:12 AM

Quote:

Originally Posted by dubojr1

I hear they are a pretty close match. @kbryant is the owner of Area P and he may could help. Here's is his member page for your use.

http://www.ninjette.org/forums/member.php?u=143

You can also do a search for "PLMFG" and find more information here about the knock-off. Most have no respect for it but others don't care it was a ripped off design, mass produced by China, and sold for less cost.

Area P is a small American company and my loyalty will remain with them.

Thanks!

This is a thread on another forum:
http://www.kawiforums.com/vendor-dea...l-exhaust.html

It seems de-badged. Mine has a logo at least

I just realized... I never posted pictures... *doh*

Pics to come soon.

dubojr1 · January 10th, 2012, 09:16 AM

I'm not sure that's enough. The "loco" on the can is an inexpensive sticker...

cocheese · January 10th, 2012, 09:24 AM

abhijitz · January 14th, 2012, 10:14 PM

I may consider. What kind of jetting was there with this system AND did you dyno?

675Raisinator · January 27th, 2012, 09:01 AM

is this the full race system?

cocheese · January 27th, 2012, 10:42 AM

Yessir.

Also, the President of AreaP also confirmed the authenticity via email:

Quote:

That looks like one of our original units from 2008.
Sincerely,
Kerry Bryant - President

As a side note:
It was a great experience to deal with a company that treats people right and has excellent support. These days, that's getting tougher to find.

THE BIG SITT · February 3rd, 2012, 01:07 PM

Still have this?

cocheese · February 3rd, 2012, 01:27 PM

Quote:

Originally Posted by THE BIG SITT

Still have this?

Few days late, sorry.

cocheese · February 3rd, 2012, 01:28 PM

Sold!

THE BIG SITT · February 3rd, 2012, 01:42 PM

That makes me sad

December 30th, 2011, 08:17 PM	#1
cocheese ninjette.org member Name: Jason Location: LA Join Date: Apr 2010 Motorcycle(s): 2008 EX250R Posts: 34	AreaP Full System Exhaust (Stainless w/12" Carbon muffler) 2008+ Selling everything you need to bolt it right up to your bike for one reasonable price ($295 obo): Full Stainless Steel System w/12" Carbon Fiber Muffler (MSRP: $495) Hanger Bracket (MSRP: $45) There is some minor wear on the _back_ side of the muffler can, mostly the bracket, where the previous owner had it mounted too close to an aftermarket brake line. It doesn't affect functionality. The bracket can be replaced as well, but once it is mounted nobody can see the wear. Fits 2008-2012 models. I decided to go back to stock because I just use my bike for commuting now and this pipe runs on the louder side and can get a lot of attention. Manufacturer's product page: http://www.areapnolimits.com/product...-250R-2008.php Pics added below. Last futzed with by cocheese; February 3rd, 2012 at 01:28 PM.

January 10th, 2012, 06:07 AM	#3
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	I think some may be concerned that this could be one of the $150 Area P knock-offs. Is there anything you could provide to assure everyone that this is a genuine AP product? __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

January 10th, 2012, 09:08 AM	#5
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	I hear they are a pretty close match. @kbryant is the owner of Area P and he may could help. Here's is his member page for your use. http://www.ninjette.org/forums/member.php?u=143 You can also do a search for "PLMFG" and find more information here about the knock-off. Most have no respect for it but others don't care it was a ripped off design, mass produced by China, and sold for less cost. Area P is a small American company and my loyalty will remain with them. __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

January 10th, 2012, 09:16 AM	#7
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	I'm not sure that's enough. The "loco" on the can is an inexpensive sticker... __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

January 9th, 2012, 04:46 PM	#2
cocheese ninjette.org member Name: Jason Location: LA Join Date: Apr 2010 Motorcycle(s): 2008 EX250R Posts: 34	Price reduced.

January 10th, 2012, 09:24 AM	#8
cocheese ninjette.org member Name: Jason Location: LA Join Date: Apr 2010 Motorcycle(s): 2008 EX250R Posts: 34

January 14th, 2012, 10:14 PM	#9
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	I may consider. What kind of jetting was there with this system AND did you dyno?

January 27th, 2012, 09:01 AM	#10
675Raisinator ninjette.org member Name: Zander the Expander Location: Houston, Texas Join Date: Nov 2011 Motorcycle(s): 2010 Kawasaki 250 (Track scooter) 2012 Triumph Daytona 675 Posts: 153	is this the full race system?

February 3rd, 2012, 01:07 PM	#12
THE BIG SITT ninjette.org sage Name: Andy Location: Indianapolis Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771	Still have this?

February 3rd, 2012, 01:28 PM	#14
cocheese ninjette.org member Name: Jason Location: LA Join Date: Apr 2010 Motorcycle(s): 2008 EX250R Posts: 34	Sold!

February 3rd, 2012, 01:42 PM	#15
THE BIG SITT ninjette.org sage Name: Andy Location: Indianapolis Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771	That makes me sad