[motorcyclistonline] - New Brembo .484 Caliper for the Café Racer and Custom Markets

[Ninjette Newsbot]

New Brembo .484 Caliper for the Café Racer and Custom Markets

This new caliper is made entirely from billet stockINDIANAPOLIS, Feb. 18, 2011 -- The new .484 caliper was designed for the Café Racer and Custom bike markets, an increasingly demanding class of customer. The name .484 comes from the displacement of the single caliper pistons, measured in cubic inches, typical of the V Twin market. This new caliper is made entirely from billet stock, starting from a machined block of aluminum using the very latest CAM technologies. Three steel bolts inserted from the wheel side join the two caliper halves. The .484 has a charcoal grey finish created by hard anodizing, with a large red Brembo logo located on the top of the piston at the rotor entry side. The caliper incorporates radial mounting technology to guarantee maximum operating precision and is interchangeable with all Brembo calipers having a 100 mm mount. Special guides machined directly into the body of the caliper assist the sliding action of the pads; therefore, no guide pins are required. Supplied in kit form, the product comes with sintered pads and is accompanied by an instruction booklet and Brembo stickers.



New Brembo .484 Caliper for the Café Racer and Custom Markets | Digg It | Add to del.icio.us


Click here for full story...