June 22nd, 2012, 04:15 PM | #1 |
Ignoring Jiggles
Name: Joe
Location: Des Plaines, IL
Join Date: Apr 2012 Motorcycle(s): '09 Ninja 250R, '06 Ninja 250R (Sold) Posts: 299
|
need exhaust help
I am installing the slip on delkevic and the mid pipe and clamp do not tighten enough to stay put. Do you have to use the gasket from the stock muffler?
Posted via Mobile Device |
|
June 22nd, 2012, 06:26 PM | #2 |
Ignoring Jiggles
Name: Joe
Location: Des Plaines, IL
Join Date: Apr 2012 Motorcycle(s): '09 Ninja 250R, '06 Ninja 250R (Sold) Posts: 299
|
Delkevic DS70
Anyone else running the DS70 from Delkevic? I just put the slip on on and it is freaking loud!!! I am thinking it might be too loud. If you have this slip on on your ninja please share your thoughts
Posted via Mobile Device |
|
June 25th, 2012, 04:21 PM | #3 |
ninjette.org member
Name: Alex
Location: Nebraska, USA
Join Date: May 2012 Motorcycle(s): 2010 Ninja 250R Posts: 12
|
I have the same slip-on. I tried tweaking with it a bit but couldn't get a proper seal. But yes, I did end up using the stock gasket. Make sure you're patient when removing it from the stock muffler! Works and sounds great now.
|
|
June 27th, 2012, 07:46 PM | #4 |
Ignoring Jiggles
Name: Joe
Location: Des Plaines, IL
Join Date: Apr 2012 Motorcycle(s): '09 Ninja 250R, '06 Ninja 250R (Sold) Posts: 299
|
I ended having to buy a new gasket as they are not included....but returned the DS 70 as it was annoying loud. Now i am on the search for that design but with a baffle.
__________________________________________________
YouTube And Facebook http://www.youtube.com/RennerVlogs http://www.facebook.com/RennerVlogs |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thoughts on this exhaust? - DELKEVIC | caphilli | 2008 - 2012 Ninja 250R Tech Talk | 16 | November 29th, 2011 11:28 AM |
|
|