Do new gen foot pegs fit on pregen?

[bitaria]

Really quick question. I know rearsets fit, but are just the pegs same too? Don't need to swap the entire assembly, but dealing with a broken foot peg.

Thanks!

[CZroe]

Yes. I have some folding ones from eBay that were made to fit both. They fit the newgen a bit tight. If anything, the pivot pin that goes through the mount and the peg was slightly thicker on the newgen so it should be an easier fit on the older bike.

I think most Kawasaki bikes accept each other's pegs. You can even move your passenger pegs to the front if you want even though they are very different.

[bitaria]

Thanks! That helps. I figured they fit...

Originally Posted by CZroe

Yes. I have some folding ones from eBay that were made to fit both. They fit the newgen a bit tight. If anything, the pivot pin that goes through the mount and the peg was slightly thicker on the newgen so it should be an easier fit on the older bike.

I think most Kawasaki bikes accept each other's pegs. You can even move your passenger pegs to the front if you want even though they are very different.