February 11th, 2014, 08:40 PM | #1 |
ninjette.org member
Name: Tang
Location: California
Join Date: Mar 2012 Motorcycle(s): 2006 Ninja 250 Posts: 44
|
Right front turn signal not working
Hi all,
I hope someone in the forum can help me out. My bike's right front turn signal isn't working anymore, and the turn signal indicator on the dash flashes really fast. The bulb isn't blown, and I don't think the fuse is either or else the left wouldn't still have been working. So what else should I check? Thanks, Tang |
|
February 11th, 2014, 10:11 PM | #2 |
ninjette.org certified postwhore
Name: D
Location: Palm Beach, FL
Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot.
Blog Entries: 1
|
The connectors are little bullet connectors that pull out really easy. They are right next to the radiator cap. Check those.
__________________________________________________
My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED! |
|
February 12th, 2014, 06:09 AM | #3 | |
ᗧ•••ᗣ•ᗣᗣ•••ᗣ
Name: Nick
Location: NY
Join Date: Nov 2013 Motorcycle(s): 2009 Ninja 250R and 2014 Triumph 675R Posts: A lot.
|
Quote:
Connection issue, if the bullb is still good, the reason the turn signal indicator is blinking quickly is due to the lack of a load from the bulb. |
|
|
February 12th, 2014, 06:25 AM | #4 |
EX500 full of EX250 parts
Name: Bill
Location: Grand Rapids-ish, MI
Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot.
Blog Entries: 1
MOTM - Aug '15
|
That's what it's designed to do when a bulb burns out and the load drops. If you only visually inspected the bulb, try actually replacing it (or just swap sides to see if the problem moves with the bulb). It might be bad but still look good. If the bulb really is good, then check the connections as stated. The circuit appears broken to the flasher - just need to find where it's broken.
|
|
February 12th, 2014, 07:02 PM | #5 |
ninjette.org member
Name: Tang
Location: California
Join Date: Mar 2012 Motorcycle(s): 2006 Ninja 250 Posts: 44
|
Thank you all! It was indeed a connection problem.
|
|
February 15th, 2014, 01:52 AM | #6 |
ninjette.org member
Name: Nate
Location: UK
Join Date: Feb 2013 Motorcycle(s): Frankenstein Posts: 49
|
Incase anyone else comes across this thread looking for answers there's a bit on these that has caused problems on all my bikes that have this holder (albeit I do live an a very wet country so a lot of stuff rots like crazy).
The bullet connectors on mine have always been fine as has the connector that goes to the middle pin on the bulb. But it's where the wire connects to the metal part of the bulb holder that fails. It fails because all they did was to strip the end of the cable and fit it so it gets mashed between the plastic and metal parts of the bulb holder, there is no actual crimped/soldered connection. To remedy this I have: For a quick fix as I'm about to go for a ride: Held the plastic part firmly in my left hand, then CAREFULLY used pliers to twist the metal bulb holder back and fourth a few times. For a more permanent fix: Held the plastic part fo the bulb holder in my left hand and then CAREFULLY used pliers to pull the metal part right out, it's just an interference fit but requires a strong pull to remove it. With it removed you will now be able to remove the wire that connects to it. Assuming both are rotten you can either fit a new wire or clean the rot off the old one with a knife blade, clean the bulb holder too. Then apply a little vaseline to the end of the wire and reassemble. Hope that helps someone |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for 09 oem rear turn signal and front turn signals and tail fairings | mbbernas | Items Wanted | 1 | September 11th, 2013 10:48 AM |
WTB 08+ Front Brake lever/Bar End/ Front Turn Signal | 1LoneWolf | Items Wanted | 3 | July 8th, 2013 02:50 AM |
Front turn signal issues... | snowman7 | 1986 - 2007 Ninja 250R Tech Talk | 6 | June 30th, 2013 07:21 AM |
Front right signal not working. | 2010ninjablue | 2008 - 2012 Ninja 250R Tech Talk | 3 | May 14th, 2012 03:50 PM |
2008+ right front turn signal | cuong-nutz | Items Wanted | 7 | April 28th, 2011 09:50 AM |
|
|