|
January 29th, 2013, 09:05 PM
|
#1 |
|
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
'94+ EX500 fork tubes and valve emulators in an EX250J?
I'm seriously considering looking for a set of trash 37mm EX500 forks to see if the tubes are feasible replacements for EX250J tubes. The bushing at the end is the same part number as the EX250J but I think the fork itself is longer (should be good for generic clip-ons) and I have no idea if the damper rods will fit. Now, the same FEGV S3501 RaceTech valve emulators are listed as compatible with EX250F, EX250J, and EX500D, so what can I get away with here considering that you are expected to drill holes in the damping rods to de-restrict? In other words, if there is a compatibility problem, is it something that could be solved with valve emulator modifications?
Very curious! |
|
|
|
February 7th, 2013, 10:12 PM
|
#2 |
|
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
__________________________________________________
Motofool  .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can fork springs be changed without removing the fork tubes? | AlanDog | 1986 - 2007 Ninja 250R Tech Talk | 26 | April 23rd, 2014 05:19 AM |
| valve emulators | lolibater | 1986 - 2007 Ninja 250R Tech Talk | 103 | December 10th, 2012 02:45 PM |
| Front fork Valve Emulators? | empire00 | 2008 - 2012 Ninja 250R Tech Talk | 5 | July 21st, 2009 01:30 PM |
|
|
