Starting problem with New Battery

Maostrapper · February 4th, 2013, 05:41 PM

Hi everybody!

I have a problem with the starter, because when I push, sound like a "Click". I thing there is a battery problem because mi bike is 2008 and I never replace the battery and the Owner's manual recommend this action each 4 years. After replace the battery the problem continue.

So, I need your cooperation. In this little town don't exist a dependable mechanical.

Link to original page on YouTube.

Sorry for my english

rojoracing53 · February 4th, 2013, 05:51 PM

So is this the same problem you had before?
And because of it you have already replaced the battery with a new one?
After installing the battery did it run at all or was it just like in the video?

Sorry I can't help you but I figure with some clearer facts someone else will.

DaBlue1 · February 4th, 2013, 06:06 PM

What size/model battery did you put in it and was it fully charged before install?
Even though all the lights are on, low amperage will not turn the starter motor over.

Joshorilla · February 4th, 2013, 06:14 PM

Bump start it!

Here's a video some complete idiot made on youtube, if he can manage it between crashing then you'll be fine

Link to original page on YouTube.

Maostrapper · February 4th, 2013, 06:18 PM

The video was recorded with the NEW Battery and is fully charged, so, what could be the problem?

To start the bike I just make the same movements of the video xD

but I need a permanent solution.

Thanks!

LoD575 · February 4th, 2013, 06:53 PM

With a solid click noise like heard on the video it's going to be two options. Starter relay or Starter motor.

First and easiest choice is to check and replace the relay is needed. Second choice is to remove the starter motor, disassemble, and inspect it.

Maostrapper · February 4th, 2013, 07:21 PM

Quote:

Originally Posted by LoD575

With a solid click noise like heard on the video it's going to be two options. Starter relay or Starter motor.

First and easiest choice is to check and replace the relay is needed. Second choice is to remove the starter motor, disassemble, and inspect it.

Thanks a lot, I will be check the starter motor and the relay as you recommend me. I post the results jejeje

KELPHYN · February 4th, 2013, 11:55 PM

check your cables. loosen them, wiggle them, retighten them. That's at BOTH ends, also check ground strap from engine to frame.

February 4th, 2013, 05:41 PM	#1
Maostrapper ninjette.org newbie Name: Mauricio Location: Villavicencio Colombia Join Date: Feb 2013 Motorcycle(s): Kawasaki Ninja 250 Posts: 5	Starting problem with New Battery Hi everybody! I have a problem with the starter, because when I push, sound like a "Click". I thing there is a battery problem because mi bike is 2008 and I never replace the battery and the Owner's manual recommend this action each 4 years. After replace the battery the problem continue. So, I need your cooperation. In this little town don't exist a dependable mechanical. Link to original page on YouTube. Sorry for my english

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2008 Not starting - battery issue?	Ash	2008 - 2012 Ninja 250R Tech Talk	8	April 14th, 2015 08:51 AM
Peculiar starting problem	Tom504	1986 - 2007 Ninja 250R Farkles	4	November 6th, 2012 07:11 PM
starting problem	b4lt1m0re	2008 - 2012 Ninja 250R Tech Talk	15	September 13th, 2012 04:03 PM
Starting Problem	emoyer	1986 - 2007 Ninja 250R Tech Talk	4	July 3rd, 2012 11:00 AM
starting problem	gogiburn	1986 - 2007 Ninja 250R Tech Talk	14	July 29th, 2010 03:24 PM

February 4th, 2013, 05:51 PM	#2
rojoracing53 Fast-Guy wannabe Name: Jason Location: Brentwood, Ca Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot. MOTM - Jan '13	So is this the same problem you had before? And because of it you have already replaced the battery with a new one? After installing the battery did it run at all or was it just like in the video? Sorry I can't help you but I figure with some clearer facts someone else will.

February 4th, 2013, 06:06 PM	#3
DaBlue1 Long Time Rider Name: Blue Location: Charlotte, NC Join Date: Sep 2010 Motorcycle(s): 2009 Kawasaki Ninja 250R Posts: A lot.	What size/model battery did you put in it and was it fully charged before install? Even though all the lights are on, low amperage will not turn the starter motor over.

February 4th, 2013, 06:14 PM	#4
Joshorilla Bass Master General Join Date: Aug 2012 Posts: A lot. Blog Entries: 24	Bump start it! Here's a video some complete idiot made on youtube, if he can manage it between crashing then you'll be fine Link to original page on YouTube.

February 4th, 2013, 06:18 PM	#5
Maostrapper ninjette.org newbie Name: Mauricio Location: Villavicencio Colombia Join Date: Feb 2013 Motorcycle(s): Kawasaki Ninja 250 Posts: 5	The video was recorded with the NEW Battery and is fully charged, so, what could be the problem? To start the bike I just make the same movements of the video xD but I need a permanent solution. Thanks!

February 4th, 2013, 06:53 PM	#6
LoD575 ninjette.org sage Name: Steve Location: Valdosta GA, US Join Date: Jul 2011 Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636 Posts: 661	With a solid click noise like heard on the video it's going to be two options. Starter relay or Starter motor. First and easiest choice is to check and replace the relay is needed. Second choice is to remove the starter motor, disassemble, and inspect it.

February 4th, 2013, 11:55 PM	#8
KELPHYN ninjette.org guru Name: Calvin Location: Quesnel, B.C Join Date: Aug 2009 Motorcycle(s): '08 250R (sold), 2013 300SE Posts: 276	check your cables. loosen them, wiggle them, retighten them. That's at BOTH ends, also check ground strap from engine to frame.