August 15th, 2010, 11:12 AM | #1 |
ninjette.org member
Name: Brad
Location: Coatesville, PA
Join Date: Jun 2010 Motorcycle(s): 1998 BMW K1200rs, 2001 KLR 650 Posts: 10
|
Muffler end cap
My muffler is missing an end cap, it had 4 rivets holding it. Any stock end cap should fit I hope
Help Please Thanks Brad |
|
August 15th, 2010, 12:08 PM | #2 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
|
|
August 15th, 2010, 12:50 PM | #3 |
ninjette.org member
Name: Brad
Location: Coatesville, PA
Join Date: Jun 2010 Motorcycle(s): 1998 BMW K1200rs, 2001 KLR 650 Posts: 10
|
Muffler end cap
Screws? or rivets, I need something to create backpressure. There is an opening all around the center hole
|
|
August 16th, 2010, 12:44 AM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
what year 250? I don't see any 250s listed in your info.
|
|
August 17th, 2010, 03:53 AM | #5 |
ninjette.org member
Name: Brad
Location: Coatesville, PA
Join Date: Jun 2010 Motorcycle(s): 1998 BMW K1200rs, 2001 KLR 650 Posts: 10
|
The bike is an 2003, This end cap has one screw in it an multiple holes around the perimeter of the larger center hole. The mufflers I bought must be older as they have no perimeter holes and only the center hole,cap has four rivets holding it in place
Thanks |
|
August 31st, 2010, 06:10 PM | #6 |
ninjette.org sage
Name: A
Location: Long Island, NY
Join Date: Apr 2009 Motorcycle(s): 2000 Honda CBR600F4 (sold) 1999 Ninja 250 (sold) Posts: 586
|
FWIW... all pre gen 88-07 exhausts are the same... one hole in teh center and 4 rivets.. no holes around the perimeter unless someone drilled them..
I have some black cans I would sell cheap if you need them... some dings and dents but perfect functionally...
__________________________________________________
2000 Honda CBR600F4 Silver and Red 1999 Kawi Racing Green Ninja 250 sold |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
stock end cap rusting?!! | gantt | 2013 - 2017 Ninja 300 Tech Talk | 5 | September 4th, 2013 05:19 PM |
WTB: Clutch lever, handle bar end, dummy cap, and clutch lever holder. 09 250r | SwagenGTI | Items Wanted | 5 | March 4th, 2013 12:20 PM |
2010 + stock muffler and muffler cover | Boom King | Items Wanted | 2 | October 28th, 2012 03:42 PM |
[sportrider - latest stories] - New Hindle Evolution and Carbon Fiber End Cap muffler | Ninjette Newsbot | Motorcycling News | 0 | March 16th, 2011 08:00 PM |
Area P Billet End Cap | kbryant | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 13th, 2010 01:41 PM |
|
|