ninjette.org

Go Back   ninjette.org > General > Off-Topic

Notices

Reply
 
Thread Tools
Old November 2nd, 2018, 05:38 PM   #1
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
Post Pandas broken watch

As some may know I like to play with watches. I took a watch making course a couple years ago and got some basic tools. Nothing elaborate really. And it is far from watch making. Cleaning and service is more like it. Before battery powered disposable watches people took there watches to a shop. Cost maybe $1.25. They would take it apart, clean everything, oil it and set the adjustment to keep relitivly accurate time. Or at least hopefully keep running.

Panda contacted me last week and sent me this really cool watch. It’s a Hamilton Khaki mechanical. Mechanical means you have to wind it up every day. As opposed to an Automatic. They run as long as you put them in motion.

The Hamilton watch company goes way back and has an interesting history.

https://en.m.wikipedia.org/wiki/Main_Page

So on to the watch. It’s a beautif field watch with a Swiss movement. The gears and springs are made in Switzerland by a company calle ETA. They are a giant watch movement manufacturer. And almost every watch company on earth uses there parts.
So this particular watch seems to have a problem in the main spring. This is the power source of the watch. The spring is wound up and the gears and parts all work to unwind the spring at an even rate. But this spring seems to slip. We will see what is wrong once I take it apart.

Taking your watch apart is not difficult. But without the proper tools and training the chance of successful repair is slim.

The oil part is tricky and you need to have the proper oil. I’ll get to all that later.
This is a photo of my little watch repair bench. And the Hamilton Field Mechanical.
Attached Images
File Type: jpg E469DC27-95CC-4866-8D61-569F615EE601.jpg (68.2 KB, 2 views)
File Type: jpg D08FE60F-5033-4D89-B92A-E30E56F0BEEE.jpg (164.2 KB, 1 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


1 out of 1 members found this post helpful.


Old November 2nd, 2018, 09:16 PM   #2
dcj13
Participant
 
dcj13's Avatar
 
Name: Dave
Location: South of Seattle
Join Date: Oct 2012

Motorcycle(s): '94 K75 std

Posts: Too much.
MOTM - Aug '15
Cool! Have fun!

I like watches, too!
dcj13 is offline   Reply With Quote


Old November 3rd, 2018, 08:39 AM   #3
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
The first step in repairing anything really is to evaluate it. So far the watch seems to keep very good time. It feels good on the wrist. Very thin at 9mm. I like the band and you can just feel it is all high quality.

I wound it up last night at 9:00pm and it stopped running at 7:30am. That is about 10 hours. The power reserv is 36 hours so tonight I will clean inspect and remove the back. There are special tools used to open a watch. It is always a frightening thing to me. One slip and the damage can’t be repaired.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 3rd, 2018, 01:25 PM   #4
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
So many teeny tiny gears in watches! Awesome engineering to make watches keep perfect time!
Snake is offline   Reply With Quote


Old November 3rd, 2018, 03:34 PM   #5
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
The scale of the parts is just crazy. This is one of about a dozen screws that hold things together.
Attached Images
File Type: jpg 366606DD-B87F-478B-9995-D0EEAEE809B7.jpg (92.4 KB, 2 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 3rd, 2018, 04:12 PM   #6
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
The next step is to put it in a case vice. This holds it steady for removing the back.
Attached Images
File Type: jpg 20CE5D9C-40D5-46F5-93F8-926AFC2839F7.jpg (78.3 KB, 1 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 3rd, 2018, 04:26 PM   #7
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
I can imagine you do a lot of your work looking through a magnifying glass.
Snake is offline   Reply With Quote


Old November 3rd, 2018, 05:31 PM   #8
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
It’s all about being able to see. Light and magnification are a big deal.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 4th, 2018, 07:48 AM   #9
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
The tool to remove the screw down water tight case back is a clamping tool with three jaws. Different points can be used for different watch designs. Once the case is firmly in the vice. The tool is attached. It clamps tight to the watch caseback. Then you turn it.
In this case the back came off with out any trouble.
I constantly cleane around the edge as I am opening it. First with air then a brush then clay. And wala the back is off.
Attached Images
File Type: jpg 5140375A-56D3-4CBD-82BD-1F995B14479E.jpg (87.1 KB, 0 views)
File Type: jpg A4EA1421-0D5C-4D80-BF70-32A6D3957B34.jpg (63.9 KB, 0 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 4th, 2018, 07:51 AM   #10
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
This watch has a cool feature. It’s anti magnetic. That is done by making the dial from cast iron. Then there is an iron plate on the back. The movement is shielded in between the two iron plates.
Attached Images
File Type: jpg 85A99845-80B3-427D-A840-45722A7FE43A.jpg (78.8 KB, 0 views)
File Type: jpg B6B1BA94-F184-4372-B7EA-E94D2A3A7FBA.jpg (89.4 KB, 3 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 4th, 2018, 03:11 PM   #11
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
The last time I took a watch backplate off to change out the battery I nicked and scratched it up trying to pry it off with the smallest flathead screwdriver I could find. I as obviously using the wrong tool.
Snake is offline   Reply With Quote


Old November 4th, 2018, 03:34 PM   #12
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
If the watch has a snap on back there is a tool for those. It goes around the case and pushes a wedge into the side of the case to pop it apart. Also a tooo that is like a clam shell tool.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 4th, 2018, 05:27 PM   #13
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Always good to have the right tool for the job.
Snake is offline   Reply With Quote


Old November 5th, 2018, 07:41 AM   #14
Panda
not an actual panda
 
Name: dan
Location: philadelphia
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold)

Posts: A lot.
Very cool! I'm excited to see what you can do to the watch!
Panda is offline   Reply With Quote


Old November 5th, 2018, 08:13 AM   #15
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
So as suspected the main spring is broken. Pretty common thing I guess. I will order one and get it as a complete unit. I can purchase just the spring. Or I can get the spring already in a new barrel with the center arbor already assembled and lubed. The unit is eight dollars more than just the spring. Also my fear is the little tabs in the barrel and on the arbor might be compromised. So the parts will be here soon.

I will clean all the parts. I firsti will put the parts in a strong degreaser with ultra sound. Then alcohol to remove the degreaser . After that each piece gets cleaned with clay and a soft wood stick called pith wood.

This process shines each part. And removes anything stuck on the parts. Also I inspect each tooth on every gear and really clean clean clean the jewels.
Attached Images
File Type: jpg A5A42930-B53C-4FE4-81C7-DD576B62B8A0.jpg (106.7 KB, 6 views)
File Type: jpg 8EFC033D-9ACB-4A00-93EF-40FF757E93FF.jpg (102.7 KB, 2 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja

Last futzed with by Racer x; November 5th, 2018 at 09:32 AM.
Racer x is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old November 5th, 2018, 09:34 AM   #16
Panda
not an actual panda
 
Name: dan
Location: philadelphia
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold)

Posts: A lot.
As a point of reference when I took the watch to a Hamilton AD they quoted me $350 to fix the watch!

That is really cool that it was the mainspring that was broken. All those little parts in the bin give me anxiety just looking at them knowing they all have to go back in the proper location to get the watch working again.
Panda is offline   Reply With Quote


Old November 5th, 2018, 09:49 AM   #17
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
It’s a little bit of work to get it going again. But it keeps me out of trouble.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 5th, 2018, 04:23 PM   #18
CaliGrrl
ninjette.org certified postwhore
 
CaliGrrl's Avatar
 
Name: Kerry
Location: Ventura, CA
Join Date: Jan 2016

Motorcycle(s): Ninja650

Posts: A lot.
MOTM - Apr '18, Apr '17, Apr '16
Wow- you must have steady hands. Nice to see a piece come back to life, though, huh?
CaliGrrl is offline   Reply With Quote


Old November 5th, 2018, 05:29 PM   #19
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
I don’t have steady hands. Just be careful is about it. I like when all the gears are in place. And I can push the first one and the last one spins really fast. That tells me it is all smooth. Then my favorite part is when the balance is in and I just give the Maori g a little bit of tension. The little pallet fork starts to swing back and forth. It’s like the heart starts beating
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 5th, 2018, 05:37 PM   #20
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Do the gears get any type of lubrication?
Snake is offline   Reply With Quote


Old November 5th, 2018, 08:25 PM   #21
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
Yes
There is a lubrication chart .
Everything gets a different lube. From thick grease to very thin oil and everything in between. At the main spring there is a high load and torque from the spring. But the gears are moving very slow. As we move along the gear train the gears speed up and the load goes down . Until you get to the last gear. It is moving very fast but has no load. So all the oils have a different quality. And grease is used on the parts like the winding gears.
The important thing is the oil must only be in places it is needed. Any extra oil will collect dirt or smear around and contaminate other oil. So very little amounts of the correct oil is applied to the exact point it is needed. It’s an art to doing it properly. I try not to make a mess of that.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 5th, 2018, 08:49 PM   #22
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
I'm enjoying the thread, Eric. I once tried to repair an Accutron and made a mess of it. I was young though, and using a microscope that inverted the image. That was a bad idea. Clearly one needs to understand the procedure from start to finish before starting.
Triple Jim is online now   Reply With Quote


Old November 6th, 2018, 09:23 AM   #23
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
I took this watch repair course. I did it years ago when there was only two levels. Now there are four. It’s very inexpensive to do and you end up with a watch you can use. It’s fun and is very well done. You go at your own pace. I really enjoyed the class and might do level three after redoing the level one and level two again.

https://www.timezonewatchschool.com/WatchSchool/
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old November 6th, 2018, 05:13 PM   #24
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
As small as watches are, it would be hard not to make a mess.
Snake is offline   Reply With Quote


Old November 8th, 2018, 05:26 PM   #25
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
OK I got the mainspring /barrel assembly today. Ordered it Sunday night and have it Thursday night. That is fantastic service

I now can start the cleaning process. I can’t do it till Sunday or Monday and I need to do some research and find the lubrication chart. I will also review my school lessons on the assemble process.
Attached Images
File Type: jpg DBC79D71-CB06-4432-8D57-FD54B75273F1.jpg (34.8 KB, 2 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 10th, 2018, 06:51 PM   #26
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
Let the cleaning begin.
First I put the small parts in tiny little baskets and soak them in a mild ammonia solution to remove the old oils. The baskets just keep the tiny parts together. The larger parts and baskets are put in an ultrasonic cleaner.

After cleaning and drying. I rub and polish each part with a clay like substance. More like gum. If you take a pencil eraser and scrub an old penny you will see what I am doing. But on a much smaller scale. Basically just rubbing and wiping anything that might be on the parts. Once that is done I can begin assembly.
Attached Images
File Type: jpg 69FD51CC-6BC1-442B-B68D-99006032C6BD.jpg (110.1 KB, 0 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 10th, 2018, 07:09 PM   #27
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Wow very precise and intricate work!
Snake is offline   Reply With Quote


Old November 11th, 2018, 10:05 AM   #28
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
I am now ready to clean the parts and guess what? Cleaner is all dried up. So off to the store for something to clean a watch movement. Hmmm.
Attached Images
File Type: jpg EFCA2B0E-44C1-49A0-AF19-D75E6865E088.jpg (113.2 KB, 1 views)
File Type: jpg 93FAA8A2-3FEA-41E5-A277-E8E2CB16F814.jpg (119.1 KB, 1 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 11th, 2018, 04:38 PM   #29
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
Well if you ever need to clear your sinuses ammonia is the trick!!

Anyhow... There are two or three ways this can all go south. Breaking parts loosing parts and damage to the parts. I was going along fine when all the sudden I broke the very fragile escape wheel pinion. A tiny point of metal that slipped out of the bearing. I pushed the top plate down and had the gears spinning freely. But when I tightened the screw. Snap!!
18 bucks and a week befor I go again.

I did manage to clean all the parts and oil some. I’ll talk about oil later. But this is kinda normal for an amature.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 11th, 2018, 04:40 PM   #30
Snake
ninjette.org certified postwhore
 
Snake's Avatar
 
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009

Motorcycle(s): 05 Blue Ninja 250

Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
Lol better than Vick’s vapor rub.
Snake is offline   Reply With Quote


Old November 17th, 2018, 06:09 PM   #31
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
I got the escape wheel in the mail. Now I just have to assemble the gear train and lube it. Once that is done I can start on what is called the keyless works. This is the stuff that is used to wind the main spring and set the hands.

It’s called the keyless works because watches used to be wound with a key. Now it has all the fancy stuff inside.

The little tiny gear comes in a cool little plastic bottle/box. That is inside a plastic pack. It’s like a pill with heavy paper on the back. That was in a plastic zip lock bag. That was inside a brown envelope. The brown envelope was in a mailer bag with the receipt.
Attached Images
File Type: jpg 53A0C0CA-1958-4FE6-BC6B-CEB4E79C04EB.jpg (95.8 KB, 0 views)
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 18th, 2018, 10:11 AM   #32
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
How easy is it to locate a replacement part like that? You need a supplier that has it in stock, and you need to figure out how to specify the correct part. Is it as simple as telling the supplier you need an escape wheel pinion for a Hamilton Field Mechanical?
Triple Jim is online now   Reply With Quote


Old November 18th, 2018, 10:26 AM   #33
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
That is a good question. With out a real answer.
http://www.ofrei.com
You can call these guys and they can probably find what you need. Here is the problem. There are so many watches and even the same watch may not have the same movement. It can get very confusing and impossible for an amature to figure it out.

In this case I got very lucky. The 2804-2 movement is the same movement used in the level one watch offered in the time zone watch class. Otto Frei supplies the parts for the watch class. And they know students will break and loose all the parts. So they have them all listed and numbered and in stock.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


Old November 18th, 2018, 05:49 PM   #34
Triple Jim
Guy Who Enjoys Riding
 
Triple Jim's Avatar
 
Name: Jim
Location: North Carolina
Join Date: Jul 2016

Motorcycle(s): Ninja 250

Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
That's kind of what I was afraid of. It seemed too good to be true, that one could just quickly order any replacement part needed. I appreciate your skill, not only in cleaning and repairing the watch, but knowing how to get the parts you need.
Triple Jim is online now   Reply With Quote


Old November 18th, 2018, 06:47 PM   #35
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
It’s not that bad really. It a fun hobby. I tried to get a job doing it. Zip

But I have the confidence to buy a broken watch on eBay and fix it up. And the watch maker tools sell for .10 cents on the dollar. Really sad actually.

And when something like this comes along I can fix it. The Hamilton Is a great watch. So far today it has lost about two seconds. I plane to keep it and it is the best watch I have in my collection
Thank you very much Panda. I really do appreciate it.
__________________________________________________
Top speed 123.369mph. Ohio mile
Worlds fastest 250 ninja
Racer x is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old November 19th, 2018, 08:33 AM   #36
Panda
not an actual panda
 
Name: dan
Location: philadelphia
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold)

Posts: A lot.
Quote:
Originally Posted by Racer x View Post
It’s not that bad really. It a fun hobby. I tried to get a job doing it. Zip

But I have the confidence to buy a broken watch on eBay and fix it up. And the watch maker tools sell for .10 cents on the dollar. Really sad actually.

And when something like this comes along I can fix it. The Hamilton Is a great watch. So far today it has lost about two seconds. I plane to keep it and it is the best watch I have in my collection
Thank you very much Panda. I really do appreciate it.
Thanks for making this thread and I'm glad that you were able to bring it back to life and you'll enjoy the watch.

Wear it in good health!
Panda is offline   Reply With Quote


1 out of 1 members found this post helpful.
Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Broken Clamp Whitedogpoo 2008 - 2012 Ninja 250R Tech Talk 4 March 18th, 2018 03:10 PM
Broken Throttle Dmitry2027 2008 - 2012 Ninja 250R Tech Talk 3 August 24th, 2017 11:25 AM
what to do with a broken CV axle? MrAtom Off-Topic 5 July 4th, 2015 09:02 PM
Broken key... 2003ninja General Motorcycling Discussion 19 July 4th, 2012 09:12 AM
Finally broken in. Ash General Motorcycling Discussion 22 May 23rd, 2009 10:58 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:03 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.