September 17th, 2010, 02:51 PM | #1 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
bar end bolt
Hey guys,
I'm trying to find out what size is our stock bar end's bolt size is. Is it M9x1.25? Thanks. |
|
September 17th, 2010, 08:07 PM | #2 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
hmm..it might be m8 x 1.25
|
|
September 20th, 2010, 01:36 PM | #3 |
Gearhead
Name: Mike
Location: IND
Join Date: Jun 2009 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 242
|
8mm would be way more common than 9mm. Do you have the bolt out? The bolts that hold the rearsets on and the passenger peg brackets are 8mm. You could use one of those for comparison. Haven't had my bar ends off, but everything else on the bike is 5mm, 6mm, 8mm.
__________________________________________________
|
|
September 21st, 2010, 08:10 AM | #4 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
thanks Mike..it's m8 x 1.25
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
bar end mirrors | akcalhoun | 2008 - 2012 Ninja 250R Tech Talk | 2 | March 7th, 2013 10:17 AM |
Ninja 250R bar end bolt. | ShadowStalk3r | 2008 - 2012 Ninja 250R Tech Talk | 6 | December 20th, 2012 09:33 PM |
Bar End Mirror for All 7/8" Inch Handle Bar? | FerociousNINJA | 2008 - 2012 Ninja 250R Farkles | 5 | August 1st, 2011 09:44 PM |
Bar end mirrors | JoeLansing | 2008 - 2012 Ninja 250R Farkles | 18 | June 27th, 2011 06:28 AM |
Throttle or bar end bolt | randomwalk101 | 2008 - 2012 Ninja 250R Tech Talk | 2 | October 15th, 2009 11:38 AM |
|
|