ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old January 23rd, 2017, 02:45 PM   #1
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Newgen 08-12 Front Captive Wheel Spacers

First off, im not a commercial enterprise I just happened to design and have a batch of these made by a machine shop to help reduce the costs and help other racers.

Included in the set for $60 shipped USPS is right and left side "captive" front wheel spacers for the 08-12 Ninjette. Right side is a traditional captive spacer with lip that is retained by the existing dust seal. Left speedo side uses two small neodymium magnets to retain the spacer to the steel inner bearing race. Its strong enough to hold the spacer in place to ease front wheel installation. Both are made of 6061 aluminum and CNC machined.

I sold a few of these on ebay for $75/set and a couple trackside for varying prices. I think the $60 price is fair, but if price is holding you back PM me an offer.
Attached Images
File Type: jpg 20160605_145702_HDR.jpg (61.6 KB, 45 views)
File Type: jpg 20160119_211552.jpg (18.0 KB, 33 views)
ck.mecha is offline   Reply With Quote




Old February 2nd, 2017, 07:00 PM   #2
ROB654
ninjette.org member
 
Name: ROB
Location: WORCESTER
Join Date: Oct 2014

Motorcycle(s): 08 NINJA 250,EX500,YSR50,86 VFR750

Posts: 50
How can I get a set of these
ROB654 is offline   Reply With Quote


Old February 3rd, 2017, 04:11 PM   #3
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
All PMs replied to
ck.mecha is offline   Reply With Quote


Old March 6th, 2017, 08:47 AM   #4
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
I have a 300 in my garage now, so I tested these to see how they fit.

looking at the parts fiche on the 300 both the left and right use the same part number, 92143-1187. Sure enough if i use two of the right spacers I had made for the 250 they work perfect on the 300.

I only have two sets left for the 250, if there is enough interest ill have more made and have some 300 sets made at the same time.
ck.mecha is offline   Reply With Quote


Old April 1st, 2017, 05:51 PM   #5
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
Good info.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service, ninjette.org Member Map

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Old April 29th, 2017, 12:31 AM   #6
Shiskibob
ninjette.org newbie
 
Name: Jason
Location: Seattle, WA
Join Date: Aug 2014

Motorcycle(s): 06 Zx10r (track) 07 zx10r (street) 2010 ninja 250 (track/street)

Posts: 5
Does this remove the speedometer?
Shiskibob is offline   Reply With Quote


Old May 2nd, 2017, 11:02 AM   #7
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Yes it does remove the speedo drive gear/housing.

Update, Im working on anodizing and should be able to offer this anodized very soon.
ck.mecha is offline   Reply With Quote


Old May 25th, 2017, 11:12 PM   #8
SCFoyil
ninjette.org newbie
 
Name: Sean
Location: RSM
Join Date: May 2017

Motorcycle(s): Ninja 250

Posts: 2
Interested. Do you make rear spacers as well?
SCFoyil is offline   Reply With Quote


Old May 26th, 2017, 09:07 AM   #9
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Im working on something for the rear, however to do it right it will require removal/replacement of the bearings so im not sure its something people other than me will be interested in doing.
ck.mecha is offline   Reply With Quote


Old August 9th, 2017, 09:07 AM   #10
dustinang87
ninjette.org newbie
 
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016

Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom

Posts: 6
are these still available for purchase?
dustinang87 is offline   Reply With Quote


Old August 9th, 2017, 11:10 AM   #11
bruce71198
ninjette.org sage
 
bruce71198's Avatar
 
Name: bruce
Location: northern illinois
Join Date: Jan 2012

Motorcycle(s): Race bikes:08 Ninja 250,11 R6,16 ZX6,SV650.3 HD-1947,2-2003,2010. 1946 Indian and a lot of dirt bikes.2

Posts: 997
Quote:
Originally Posted by dustinang87 View Post
are these still available for purchase?
I could use a couple sets
bruce71198 is offline   Reply With Quote


Old August 9th, 2017, 01:54 PM   #12
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer,Ninja250R street EX250F#1 EX250F#2 EX250E CBR250R(MC19) CBR250RR(MC22) VF500F CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
I can use a couple sets as well.
DannoXYZ is offline   Reply With Quote


Old August 9th, 2017, 02:52 PM   #13
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
I have only one, maybe 2 sets available now. I will check and confirm. Since it seems like there is interest Ill have another batch made - they should be done in less than 2 weeks.

Quite a bit of the cost is in the drilling, epoxying, and the magnets themselves on the speedo drive side. Is the magnet a feature that adds value or should it be removed?
ck.mecha is offline   Reply With Quote


Old August 9th, 2017, 03:11 PM   #14
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer,Ninja250R street EX250F#1 EX250F#2 EX250E CBR250R(MC19) CBR250RR(MC22) VF500F CBR600RR

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
What would cost difference be without drilling & magnets?
DannoXYZ is offline   Reply With Quote


Old August 9th, 2017, 03:25 PM   #15
Flying
ninjette.org sage
 
Name: -
Location: somewhere cold
Join Date: Jun 2013

Motorcycle(s): 2010 Ninja 250

Posts: 596
Blog Entries: 1
I'm also interested and I don't think the added cost of the magnets does much for the overall value.
Flying is offline   Reply With Quote


Old August 24th, 2017, 05:57 AM   #16
KiddEng
ninjette.org newbie
 
Name: Terry
Location: NJ
Join Date: Dec 2014

Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track)

Posts: 6
I'd be interested in 2 right sides for a Ninja 300 front if you are having some made.

Any idea if you will have Rear's made too (for 300)?

thanks!
KiddEng is offline   Reply With Quote


Old September 5th, 2017, 11:28 AM   #17
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Alright folks I did not have these made last month. Ive spoken to the machine shop and sent in a work order this morning.

New pricing:

$60 NewGen. set with magnets shipped
$50 NewGen set w/o magnets shipped
$30 Newgen speedo side spacer only no magnets shipped
$45 300 set shipped

Ill make you a deal if you buy multiples. My paypal address is my username @gmail. If anyone has any specific questions ill be glad to help where I can.

I havent seen enough interest to develop the rear spacers for the 250 or 300 yet, maybe that will change.
ck.mecha is offline   Reply With Quote


Old September 5th, 2017, 12:02 PM   #18
dustinang87
ninjette.org newbie
 
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016

Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom

Posts: 6
payment sent
dustinang87 is offline   Reply With Quote


Old September 15th, 2017, 08:19 AM   #19
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
I shipped the last sets I had but the good news is my machinist finished up 10 fresh new sets today. Ill offer 20% off to the first three purchases if you can supply an installed picture.

Ill be at Barber with STT Oct 15/16 and again with WERA Nov 2/3 if anyone needs to see them in person.
Attached Images
File Type: jpg 0915171107_HDR[1].jpg (84.2 KB, 7 views)
ck.mecha is offline   Reply With Quote


Old September 18th, 2017, 05:55 AM   #20
KiddEng
ninjette.org newbie
 
Name: Terry
Location: NJ
Join Date: Dec 2014

Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track)

Posts: 6
Payment sent 9/15 for set of front spacers for ninja 300.

Let me know when you get them out, and I'll get pics for you asap.
KiddEng is offline   Reply With Quote


Old September 18th, 2017, 01:12 PM   #21
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Two sets claimed, one remaining for 20% off.

KiddEng - Shipped out today
empire00 - need your shipping address and yours will go tomorrow
ck.mecha is offline   Reply With Quote


Old September 19th, 2017, 09:00 AM   #22
dustinang87
ninjette.org newbie
 
Name: Dustin
Location: San Mateo, CA
Join Date: Nov 2016

Motorcycle(s): Ninja 250r, Ducati 1098, Honda Grom

Posts: 6
just received mine! I wont have time to install until the weekend. Ill post up some pix when I do!
dustinang87 is offline   Reply With Quote


Old September 21st, 2017, 05:59 AM   #23
KiddEng
ninjette.org newbie
 
Name: Terry
Location: NJ
Join Date: Dec 2014

Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track)

Posts: 6
Quote:
Originally Posted by ck.mecha View Post
Two sets claimed, one remaining for 20% off.

KiddEng - Shipped out today
empire00 - need your shipping address and yours will go tomorrow
Got my pair for the 300, will be at the track this weekend and will get photos for you.

thanks again!
KiddEng is offline   Reply With Quote


Old September 22nd, 2017, 02:35 PM   #24
KiddEng
ninjette.org newbie
 
Name: Terry
Location: NJ
Join Date: Dec 2014

Motorcycle(s): 14 Kawi Ninja 300 SE(Street/300 Series Races), 06 Daytona 675 (Track)

Posts: 6
Installed the front spacers on the 300 this morning at the track, nice fit and easy on.

If you're thinking of making rears I'm in for a set haha!
Attached Images
File Type: jpg 20170922_134706.jpg (70.0 KB, 7 views)
File Type: jpg 20170922_134737.jpg (74.3 KB, 5 views)
File Type: jpg 20170922_134845.jpg (102.5 KB, 4 views)
File Type: jpg 20170922_134858.jpg (98.2 KB, 3 views)
File Type: jpg 20170922_134906.jpg (112.3 KB, 4 views)
File Type: jpg 20170922_134809.jpg (75.4 KB, 2 views)
File Type: jpg 20170922_135035.jpg (90.9 KB, 4 views)
File Type: jpg 20170922_135041.jpg (85.1 KB, 5 views)

Last futzed with by KiddEng; September 25th, 2017 at 07:29 AM. Reason: Added on fork pics
KiddEng is offline   Reply With Quote


Old October 30th, 2017, 07:03 AM   #25
ck.mecha
ninjette.org member
 
Name: Chris
Location: Atlanta
Join Date: Nov 2015

Motorcycle(s): 1969 Benelli Cobra 125, 1970 Honda CB160, 2009 Kawasaki 250R

Posts: 107
Ill be at the WERA GNF Thur/Friday if anyone wants to come by and check a set out on my bike or pick one up. Look for novice #47.
ck.mecha is offline   Reply With Quote


Old September 21st, 2020, 11:46 PM   #26
charlessilver
ninjette.org newbie
 
Name: charles
Location: Phoenix
Join Date: Sep 2020

Motorcycle(s): 09 xb12r, 09 ninja 250 w 300 motor, 04 gsxr600, 06 rmz 450, 89yz490

Posts: 2
Captive spacers

how shipped to 85202
For a 2013 300 set w magnets
And an 09 250 set without

Thx
charlessilver is offline   Reply With Quote


Old October 16th, 2020, 02:37 PM   #27
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
Doesn't look like Chris has been back here since March 2019, he probably won't get this message.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service, ninjette.org Member Map

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Ninja 250 08-12 Rear Captive Spacers DCMoney Motorcycle-related 27 January 23rd, 2017 06:16 PM
newgen or EX500 17" front wheel in Pregen front forks Yamahawk 1986 - 2007 Ninja 250R Tech Talk 45 February 13th, 2016 08:25 PM
Replaced a NewGen front wheel? I need your bearing spacer! InvisiBill Items Wanted 10 February 20th, 2014 01:04 PM
Ninja 250 Captive Spacers DCMoney Ninjettes At Speed 45 February 10th, 2014 11:29 PM
WTB: Newgen Front Wheel KChatham Items Wanted 1 June 3rd, 2012 05:44 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 09:59 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2020 ninjette.org, All rights reserved.